CAD

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0I am trying to add notes in 3d space under the annotations tab. I have done this before (I do this almost everyday) but for some reason, now, when I use the middle mouse button to set the location of the note, it cancels the operation altogether. This function is still available in 2d space and works just fine.

Creo 9.0.4.0 & windchill 12.1We are looking to convert our models from imperial to metric.  We have legacy items dating back to at least Creo 2.  There are 3 main segments of the company.  @ of the 3 already use metric for modeling and drawing. One is still using imperial and would like to switch. In testing models/drawings made in Creo 9, it was discovered that if a dimension was manually added to a drawing (addxxx), the tolerances did not change when the Model Properties were converted.  Also, GD&T does not appear to change.  Part and drawing DTL files exist and are working fine, if the part was created and not converted. Aby ideas of how to convert they in bulk and not manually changing each dimension?  Changing one drawing at a time is acceptable, but trying to avoid the need to change dimensions one by one.

Hello friends. In the drawing, I need to specify a detail, transparent and in fine lines. Creo is able to make the detail transparent, but the line style is dashed. I open the drawing.Layout > Component Display > Style > Picked View > OK.In the menu manager, I select the PhantomTrnsp style. As a result, I get a transparent display of the assembly part, but with a dotted line.How to adjust or change the default PhantomTrnsp line style to thin rather than dashed?

Mathcad prime 9 wont open past the splash screen, and closes afterwards. Ive looked the problem up on forums which suggested i delete the config file, didnt work either. Do you have any idea on how to fix the problem?kind regards

I am trying to export a line body from creo parametric 10.0 to Ansys. But I only seem to be able to export the solid body. Is there any way I can just export a line body? I have tried deleting the solid bodies and just exporting the sketches but it didn't seem to work. Maybe there is a way to convert sketches to line bodies?

We're using Creo 8.0.6.0 at this time. I'm running into an issue using a relation-driven sub-assembly, but feel like it's close. The first stud & nut in the patterns aren't flexing properly, but the rest are and I'm unsure what the issue is. I've changed & moved relations around, added and removed flexible dimensions/variables up until this point, this is the closest I've gotten. Some background: we originally used a family table for all of our stud & nut assemblies but found a few issues using them - they often really slowed down our large assemblies, and sometimes ran into odd regeneration issues. I've taken a look at intelligent fasteners, but I don't think it has what is required. We're testing using a single sub-assembly that drives the part dimensions of the stud and nut. FLG_CALLOUT and GASKET are restricted, string parameters that are pre-flexed. Users can change them via a drop down menu. These two parameters will be changed when added to an assembly

I WANT TO TAKE THE EXCEL REPORT OF THE BILL OF MATERIAL WITH PART NUMBER AND DESCRIPTION AND MATERIAL ASSIGNED IN CREO 9.0

I already know there are a lot of discussions about this topic but I think this indicates that using the correct scaling in Creo is too complex.According to this article it should work by adjusting some config.pro settings but for me there is also something unclear. The thing is that with "main scale" there is a suggestion that this is the scale that is shown on the left bottom side of the drawing window in Creo Parametric (also set in the drawing parameter "scale").But my current experience is that the scale that is used for the DXF/DWG has some sort of relation to the scale of the view that is first in the drawing view tree. The setting below on yes is what I want but the "...view named main_view..." brings in some confusing. What is the definition of "main_view"... dxf_out_scale_viewsyes, no*Specifies whether to scale drawing views when exporting to the DXF or DWG file format. This configuration option is available as the Scale drawing views when exporting t

I'm used to it by now. Regularly, Mathcad loses the connection to the license for no reason at all I need to stop what I'm working on just because. Not to say that license management and activation steps must be among the worst kind of processes I have ever seen for a paid product.Not happy with the overall situation, this time things got worse. Lost license and Mathcad is looking for a "Product Code". Something I never got when managing licenses. When I read the articles about it in the below link:https://www.ptc.com/en/support/article/CS30357I get to a "solution center" which suposedly would provide me this product code. It seems like PTC is extending its bad support to a 3rd party now, but its the same quality of work:https://solutioncenter.digitalriver.com/public_csmI got the sales order, contract #, customer #, but this Digital River Solution Center does not recognize anything. Can anyone help? I can't use the license now. Below is the answer I got:"The inputted order number could

Hello community, I need your support. Which solution is better? How would you set the constraints and power? Is the solution approach using the creo assembly the right one?   Thank you for your support.   Creo 7   Translated by the Community Moderation using Google Translate -----------------------------------------------------------------------------------------------   Hallo Community, Ich brauche eure Unterstützung. Welche Lösung ist die bessere? Wie würden Sie die Einschränkungen und die Kraft festlegen? Ist der Lösungsansatz über die creo Baugruppe der richtige?   Vielen Dank für Ihre Unterstützung.   Creo 7    

Hello I'm trying to make the drawing model a new window of Creo now and use fast printing using macros.It works well if you run in a different environment (for example, an existing window rather than a new one), but when you create and run a new window using the ProObjectWindowMdlnameCreate() function, the ProMacroExecute(); function returns a PRO_TK_NOT_VALID errorI don't see the window at all, but I think it's because I'm trying to run the macro properly, is there a way to fix it?Sleep(); I tried a function to give delay, but there was a delay in the window as well as ProMacroExecute()I'd appreciate it if you could tell me how. If there's any other cause than this, please help.I am attaching the code I used below.Thank you.   status = ProObjectwindowMdlnameCreate(name, (ProType)PRO_MDL_DRAWING, &window_id); status = ProMdlDisplay(mdl); status = ProWindowCurrentSet(window_id); status = ProWindowActivate(window_id); wchar_t* mkMCRTopLevel1 = L"~ Command `ProCmdQuickP

I have a very strange problem with this new mathcad. So the situation is that with a file of only 1.5 mb (something about 30 pages), page scrolling gets stuck and even when entering text (ctrl + T), writing a little faster, the text appears with a delay of several seconds so that it is impossible to In this case, work comfortably, I won't write about the rest because it covers only such basic functions. And the question is what is the reason for this functioning. A month ago I bought a new Asus TUF 15 computer but I returned it after some time because I didn't like it, now I have a new Acer Nitro 5 for a week and the problem is the same in both the first and second case, so it shouldn't be a hardware issue because I have new ones components good enough to work on 10 such mathcads at the same time.As for the rest of the actions I took, even when I switch Mathcad from AMD to NVIDIA (RTX 3050), the situation is the same.I will be grateful for an answer as to why the program behaves t

Hi, I am using Creo parametric 4.0 with the AAX.I created a part using copy geometry references from a skeleton model, and noticed that when creating a drawing and adding a view, the view size seems to include the copy geometry feature.this would not really be a problem because it does not seem to affect the drawing size itself when exported. but it does not allow me to use something like the PTC ModelCHECK to find the OVERALL_SIZE of the part.is there a way to hide the copy geometry feature so that only the solid geometry is being shown in the drawing's view borders and such.    

Hi I want to plot this summation. I would like to do it as an 'odd summation', were I don't want it to process n=2. Is there an easy solution for this problem? 

Migrated my Mathcad Prime 9 to a new Windows 11 PC, moved license to new Host ID, etc.  Prime 9 seems to work as usual.  But the Legacy Converter always fails and aborts - no message as to why.  The Mathcad Converter folder is present with what appears all the .dll's and the  mccnv.exe  executable.   Something else I need to do to bring this back to life?  

I can find in the User Help Manual the Mathcad API Workbook Object Commands to Pause and Resume a Calculation in a Loaded Workbook [ workbook.PauseCalculation() & workbook.ResumeCalculation() ] - but nothing else related to running / calculating a workbook after loading.  My Workbook is not automatically running / or calculating after being loaded into Mathcad Prime 8 by the Visual Basic program, and these commands do not appear to do anything to fix the situation.  What is the workbook command that will force the Mathcad worksheet to fully calculate after being loaded?

Hi PTC, my Mathcad 9 prime had licensed already. but some of the feature still cant use. you can refer snapshot below.  Please help me on this issue Thanks 

I'm trying to make a simple program to select values based on the Size variable.  But the use of "Size" in the program returns False.  However, if I assign Size to "x", and use it in the program, it works fine.  I don't understand why.  See attached. Thank you in advance.

Hi all, I haven't done detailed testing - this is just a hunch - but I am working on a "large" assembly and the opening / regeneration times are very long compared to what I am accustomed. One thing I want to remove from my list of suspects is whether having annotations attached at the assembly level will result in longer regeneration times. For example, would you expect an assembly that utilizes the following component (assembly of a table and 4 casters) to take less time to update if the 2 annotation dimensions were removed?

I want to create an aerofoil with ribs and spars like below. The curve that I have made doesn't allow me to extrude it, therefore I have to use the 'spline' tool to sketch over the points. However sketching over the points makes the aerofoil inaccurate. Is there any other way of doing it. I can't use the blend tool because I want to show the aerofoil in its individual parts like below.  Thanks very much. 

I have created a solve block but the block only returns my guess value as a solution which is wrong.

I use Creo Parametric 9.0 / folded metal sheet should be bent again I have to construct a folded sheet metal strip with a 90° bend. The folding (180° tab) of the sheet is no problem, but the bending of the folded sheet.  Are there any ideas?  

I am using Creo Parametric Release 8.0 and Datecode8.0.8.0I was hoping to understand what Application Feature would be required for Generative Design. We have a user who has a very basic install and it is missing.

 Creo View 10.1 and Creo Illustrate 10.1 have Released! The Visualization family of products, Creo View, Creo View Adapters, Creo View Toolkits and Creo Illustrate have released.When considering updates to any of these products, it is recommended to update all Visualization products to maintain compatibility across the Enterprise.  Key Highlights Creo View 10.1 (Client & Toolkits)In context Find & Filter for Model treeNative PDF View – Allow editing of annotation markupsSupport stopped for Red Hat Enterprise Linux 7.xNew printable keyboard shortcut sheets (MCAD & ECAD) added to the OLHCreo View WebGL ToolkitAdd API to control what content is applied from an annotation set loadAdd APIs to calculate bounding box/sphere of parts Creo View Adapter 10.1SolidWorks – Support Assembly Feature, Flexible Feature & Virtual (Embedded) Components for Windchill Structure VisualizationMBD Improvements for NX content publishingPVSOptimize – Selective attri

Hi Team,We are trying to retrieve our license from PTC. But it was throwing INVALID HARDWARE error. Could you please take a look and assist on this please?