CAD

Is there a location where all the various versions and what their updates entail ?     

Good morning, guys.I've struggling to complete the installation of the software of yours.It always ends up with an error, no matter what.The error message appears after completing 1% of the installation as follow:"Some applications failed or cancelled. Click information icon of failed application for details"Although, when I click it for further details, it just states the obvious ... that the "installion has failed " and it has created a log about the error , this which I could never find.Looking forward for a feedback for support.It's kinda frustating.And I'm in really need of the software right now.

In Creo Parametric, we know that there are 2 kinds of text in 2D sketch, one is to add text manually, and another one is to add it by parameter of the related model, and I want to know if we have some function or interface in pro/toolkit to access the text to change the parameter relations as the picture showed. Currently I couldn't find any similar function. I need the help....Thanks a lot! Bob 

Hi,As you see in the attachments, the thickness of the arrow line is so lean when export to pdf. How to increase that arrow line thickness? I tried using print to PDF but the result is same. I need the arrow lines to be at least 70% thick as same as the drawing line. or need to reduce the line thickness same as arrow line thickness. Please refer the image 2.

I'm trying to represent a tubular diagonal brace, and the pins that attach the brace to a structure, using beams. The pin beams have two segments so I have a node at the center to attach the diagonal brace to. The ends of each pin have a fixed joint connecting them to the holes in the ears (pictured in the first attachment).  The diagonal brace has spherical joints on each end so I have a beam release on one end allowing all three rotations. The other end has the Y and Z rotations released but the X rotation remains fixed to prevent  the beam from spinning about it's own axis. The trouble comes when I generate the solid mesh. When I have all of the attachment pins in the model, Creo Ansys will generate the solid mesh with no problem. As soon as I put a diagonal brace into the model, the meshing process fails, sometimes with a fatal error. Creo Ansys doesn't give any diagnostics, so I have no idea what the issue is or how to resolve it. Do I need joints between the ends o

Hello I am new to Creo and I am going thru the tutorials and during the Sheet Metal Sketch Form tutorial it shows the Add Taper check box, however in my Options box in Creo 8.0 that isn't there.  Is there an option somewhere to turn this on so it shows up?  Earlier in the Fundamentals I had the same problem where the Add Taper box wasn't missing as well.   

I was having problems with the MCDM converter and ran through a bunch of troubleshooting.  I finally got to the step of uninstall and reinstall.  Sadly, I have not been able to reinstall, getting 1% error.  I use this software often for school and I have a student license.  I am having trouble downloading the installation file also but got it on another computer.  Anyway I am going to take some snips of my screens and hopefully someone can tell me something to check to fix this.  I am getting stressed and desperate as I must have this software to complete my classwork.  next  nextnotice this closeup of above nextNotice again still showing Zero MB  The installer then sits here and does not download and after about 20 minutes fails and trying to restart it fails.  I have been trying to fix this for hours for the last three days and I am needing help soon. I am hoping somone knows something else I can do or try, I

Vacuum pressure is applied into the center of the chamber as shown. This pressure can distort the circle. A fixed constraint will anchor the square plate. (12 locations in total) Q) How do I give a fixed constraint? (You have to consider that the circle can be distorted.) The Creo version I use is 7.0. Creo super master please help  

I know how to change them to scientific format (based on ptc article https://www.ptc.com/en/support/article/CS124580). Is there anyway to change the scientific format to fixed format instead of the current years-long vote-consider-action procedure? This is a basic function needed in result presentation. Why bother end users to vote for ptc to take actions to add this basic unction? End users will not be bothered to vote instead of voting on using competitors' FEA software tools. Why ANSYS has this basic function but Simulate needs people's vote to have this basic function?

I am trying to idealize the bolted joint by advanced spring in creo simulate.  The axial stiffness can be calculated Kxx=EA/L Anyone could please tell aboult calculating the stiffness of bolt in Kyy and Kzz direction     

Hello everyone. I need to change the default diameter in the creation of the water circuit in EMX, in the options there is the entry WATERLINE_DESIGNER_DEFAULT_COMPONENT set like this:mm | meusburger | E2080_8_10 && mm | meusburger | E2000_13_14 && mm | meusburger | E2130_11_8_2_4 && mm | meusburger | HOLE_8, where I assume that HOLE_8 is an instance present in the HOLE.dat file, I should bring the default value to 8.5, in the file HOLE.dat I inserted a line with the name of the instance HOLE_8_5 but changing the options mm | meusburger | E2080_8_10 && mm | meusburger | E2000_13_14 && mm | meusburger | E2130_11_8_2_4 && mm | meusburger | HOLE_8_5 when I launch the creation of the circuit it always remains Ø8, something wrong?

It is necessary to express the power of the power plant in decibels.I go online and find out that bel is the decimal logarithm of the ratio of two physical quantities, the second of which (the denominator of the fraction) is called a certain base. In the same place on the Internet you can find the corresponding formula for the calculation.Here's how such a calculation might look like in Mathcad 15 with the help of tools for separating variable and function names into styles using different font colors (black, green, blue and white - invisible).If one watt is taken as the base, then the power of the largest Russian thermal power plant, Surgutskaya GRES-2, will be 96.812 decibels (see please the picture and the attach). We solve the inverse problem: given the power in decibels, it is necessary to calculate the power in the usual watts. Question. Why are decibels called decibels and not decabels? After all, if we multiply the logarithm by ten, and not by one tenth.   See please als

Hi I'm trying to solve an issue where I want the if function to work, when one of the variables in some cases could be undefined. Is this possible, or have some work around? I'm using Prime 9.  

I m trying to calculate the reaction influence line for a simple indeterminate beam problem.I built up functions for fixed end moment and slope deflection equations. Now I m trying to calculate rotations at the end supports of the beam, I m getting error because the slope deflections equations are conditional expressions. I m expecting set of end moments when the load is placed on the particular element. How can I achieve this ?    

I want to have the plot values on scale directly and not modify the scale within plot is it possible in 15?

I can't use the 30 day trial version of mathcad prime 9 and I'm new to the community. ----------------Translated below text to English using google translate. Done by Community Moderation.   Subject: no puedo usar la version de prueba de mathcad prime 9 Body: no puedo usar la version de prueba de 30 dias de mathcad prime 9 y soy nuevo en la comunidad.---------------

Multi-sheet capabilities are available in all other 2D Drafting Tools like AutoCAD, Creo Elements Direct Drafting should also get this capability at the earliest. It is a very basic requirement for any 2D Drafting Tool. Moreover it is already there in Creo Element Direct Modeling Tool, So it just has to be extended to Creo Elements Direct Drafting Tool.

Hello,   starting Creo Parametric, i am supposed to register the "quality agent" and I'm asked wether to do it or not. If I pull "yes", an error message will blow up, telling me I should contact the technical support with the error "0x00000009", afterwards the program shuts down. If I pull "no", the program will directly shut down. Unfortunately I can't contact the technical support because my "web account does not hold the following required privileges to access this application: Customer Service Access", so I try it this way. Could anyone help me?   Thank you very much in advance!

My 3D plots have started appearing like this:When I drag the plot area, the problem disappears:But as soon as I let it go, the weird pattern reappears. I thought it might be a problem with the mesh frequency pairing with the pixel spacing on my display, but resizing does nothing, and, in fact, the problem appears as soon as I open a new 3D plot area.  Anyone encountered this?  More pertinent question: does anyone have a solution?Working in Prime 8.0.0.0 Thanks for any hints.Richard   

Hi I want to extract a given value from a table based upon two variables. For exampel, by selecting the variables "A" and "b" I want the extracted value (output) to be "5". Is this possible to do? Thanks in advance.   

Dear All,  for my study project, i am working with dowel pins in an assembly. I want to run Modal and static analysis of the assembly and i want to idealize these dowel pins as shown in the image.  Could anyone please give a feedback about how these dowel pins should be idealized.   

Computer was replaced need to download the installation files for Mathcad 15 to reinstall on new computer.

Hi, I am trying to create an exploded view of an assembly with multiple parts. The whole assembly was created in SOLIDWORKS 2023 and I am using STEP file of this assembly to create an exploded view in CREO 7.0. But it seems like I can't use the feature "Move with Children" on STEP file to move two overmolded components together. Any idea ?   Best    

Team  I have a flat view(sheetmetal part) in the drawing.  i would like to find it through code for the reference  to  ordinate dimensioning to the view,     

Hi All, I am currently trying to run a Modal Analysis on a Frame. I have got DBID error (it did mesh) with a specific number. I found a thread on PTC Community as to how to find the Element which is causing the error by running the analysis on ASCII. But when I try to run it on ASCII, the software immediately crashes.  Is there any way how to solve the crash issue or to find which element has caused the analysis error? Thank you so much for your time and help. Kind regards