CAD

Dear PTC Support Team,I am reaching out for assistance with an issue I’m experiencing while trying to activate a license using your License Indicator. I received an order number from my university and have been trying to generate a valid license based on that.While I am able to request the license and it does appear in my files, the status is always shown as “Not Eligible.” I have already attempted several steps to resolve the issue, including:Deleting and reinstalling the license filesCreating a new PTC account with a different email addressReinstalling the software entirelyUnfortunately, none of these steps have resolved the issue, and the license remains unusable.I would appreciate your support in resolving this. If you require any additional information, such as the order number or screenshots, I will be happy to provide them.Thank you in advance for your help.Best regards,Leandro KnoopTechnical University Braunschweig

Good day.Has anyone encountered this error message in the log of messages?No relations have been defined for this model.I am seeing this in a few of our programs but cannot seem to find any "wrong" relations within the various parts or sequences.This creates an extremely long set of log messages which cannot seem to be resolved.I have found this article from Creo3 (2015) but with zero answer to this specific message inside, despite mentioning it... Currently on Creo 9.https://www.ptc.com/en/support/article/CS196584If there are no relations and it  provides this error, is Creo indicating a requirement for relations in the sequences?Any help would be much appreciated.

Hello, recently I am using CREO parametric 11 for a project, and I have found useful STEP files online that I need. However, when importing they seem to lose many features and even the ability to edit them in basic ways. Is there a way to import STEP files so that they can be edited?

Would anyone care to comment on the Mold Machining Extension (MMX)?  What does it offer over and above what is in the NC complete set module for 3 axis milling?

Hello Creo experts,I have a question regarding volume milling. I have often chosen to use rough or HSM sequences instead of volume milling for roughing operations. However, I've noticed that the cycle time for HSM and rough sequences is not as good as I expected. Despite being named high-speed milling, the cycle time is actually longer than the volume milling cycle for the same pocket size. Can you please advise on the parameters I may be missing to achieve a shorter cycle time compared to volume milling on the same size pocket?Regards,Asif Fisa

I use Creo elements/directs drafting Mixed UI 20.7 on Lenovo LOQ gaming 2024 having RTX 2025 Nvidia When I draw any Geometry (Line, Circle, Point, Rectangle,...), I can not see it on displayI had tried to solve by checking Geometry setting, Viewport -> setting, Setup -> show -> Layer. But all fault. I see that I open Setup -> show -> Layer, change color to White and save. But, when I open again. It is still default with Black. whether is that the cause? What is the way to get ? Or. Who are know the tips to fix it? Thanks

Hello,I have attached Mathcad prime 9 document.  I'd  to iterate thru sections and select the proper section size that satisfy certain design criteria. On page 3, the TC sections are listed as shown belowThe member is selected manually until the interaction ratios (IR) on page 6 (shown below)and interaction ratios on page 11 (shown below)are all equal or less than one.i Just want to automate the process. Thank you for your assistance!Sam

The answer of Make one ohm by one ohms is below. Each current of resistor must different. Make one ohm by 2 S and 2 ohm resistors. Each current of resistor must different.   This makes 1 ohm but same current. So not the answer.    This makes 1 ohm but same current. So not the answer.

Hi guys, I need your help to solve the problem that I attach belowi have version 11.0 I wish to find the maximum value of a function containing a range of values in z.receive my best regards

Hello I am trying to install mathcad for a company that I work for. The provided license only works for mathcad up to version 10 and the current express installation manager only allows me to install mathcad 11. I have installed 11 and tried the license and it does not work. I have found multiple community posts on how to install these version but they all use the same express installation method and it just seems to pull the then current available version. How do I specify the installation version?

Hello All, I have a mathcad project where the output is required to have in a matrice form which I am unable to. The function will work like the following, for each value of beta it will give a column of outputs and thus for the number of varibale beta, it will generate corresponding number of columns. Please help with a solution Thanks

We use a method of joining to sheet metal using a process called tog-l-loc also known as clinching which cold-forms the part metal using a special punch and die to form a strong interlocking clinch joint. The result of the process is a round, button shaped extrusion on the die side of the assembly, and a small cylindrical cavity on the punch side. The clinch joint requires only the sheet metals that were joined. No external fasteners, or welding is utilized in the process.I'm trying to re-create the joint using punch or die, does Creo have the ability to punch(form) two sheet metal plates simultaneously in assembly? The thickness of both sheet metal thins out after the operation. See attached image. Let know your thoughts or ideas. 

Hi,I am using creo 9 and on one of my drawings I have a section view that isn't showing up. The section shows fine in the model, but on the drawing, hatching appears on the view, but it is not cut.  I have tried flipping it and using a local section instead of a full section and switching from a projection to a standalone view. If anyone has any suggestions, I would greatly appreciate it. the 

I am assisting a client with computer migration for their firm.  While migrating 9 users/devices to new Dell Precision Workstations with Windows 11 Pro, 8GB GPU, 32GB RAM, I7 CPU, I have encountered an issue with 2 workstations that have this same issue.  I have activated the device licenses successfully and no matter how many uninstalls/reinstalls, removal of PTC folders etc, the software for only these two brand new devices fails to launch in a usable program window.What is interesting is if I click around on random areas of the white program box I can get some program menus to respond and appear above the white screen (See last pic)Any advice would be appreciated.Thank you

Hello, dear community members!I want to design a mold cavity, but I am stuck on "Volume Split." I can't run this command, and after doing some research, I noticed that the problem is related to the "Parting Surface." I received the following error: The parting surface has 3 contour(s), make sure that each is necessary. Could you please help me solve it? Please check the attachments as well.

 I need to create a note with a symbol similar to a drop, in the notes menu there are only square, triangle, ellipse... I would like to know if there is a way to customize these shapes? 

Hello,I wanted to ask regarding the PCX extension. Is there an advanced version? or is the T1 package the only one available in creo? Also, is there a product list that I can look at to know the coverage of the extension? Thank you.

Puzzle-43. Find the area AED in the square ABCD when AE=4 cm and angle AEB=90 degree.

I have two Mathcad licenses. I activated them in the PTC Mathcad Prime 10.0.1.0 application, but it keeps asking for activation. We need to know which version of Mathcad our license is activated with.Also, we can't download software from the portal; it says access denied.You can contact us at soporte@geoconsult.cl

Hello, I am the Creo Librarian for my team and we had an issue recently that caused some folks Creo Schematics files to error during the syncing process.  They get the error "This file contains an item name that already exists in the design."  This had to do with a datatable issue and we have been able to correct most peoples files by going into that datatable and deleting the duplicate parts.  However, on some of the designs, the datatable in question is not appearing in the datatable explorer and I am not sure how to recover that datatable as the program is saying that it already exists within the design.  Is there a way to recover said datatable or am I looking in the wrong location to get it back into the datatable explorer. Thanks, Justin

I have an assembly cut that has stopped working no matter how much I fidget with it. I've tried redefining the planes in sketch set-up, reference planes, adjusting the dimensions, restarting Creo, ....   If I add a new cut, the cut works fine.       There are 50 instances in the family table, so if I can help it, I would like to not redo the cut.   Using 10.0.7.0 for a long time.

it cause slower performance when i do loop with ProFeatureWithoptionsRedefine function, is it possible to turn Off Auto Regenerate after ProFeatureWithoptionsRedefine or ProFeatureWithop function?

I hen I try to get a license file for Mathcad 14 (that came with a textbook) from this link, I get "The trial program you are requesting is no longer available. Please visit the software product page on www.ptc.com to explore our latest versions."https://support.ptc.com/appserver/lm/mathcad/call_logger/callLogger.jsp?_gl=1*197v5lr*_gcl_au*ODQ5NDc1NTc4LjE3NDg0NjM4OTkuMTIxMDkwODUxOS4xNzQ4NDY0MTEyLjE3NDg0NjQxMTI.*_ga*MTUzNTk1MTk2My4xNzQ4NDYzODk4*_ga_7NMP2MSYPM*czE3NDg0NjM4OTckbzEkZzEkdDE3NDg0NjUxNTMkajM4JGwwJGgw

A tool to create and manage a custom font. I am thinking of the possibility of creating a sketch for each character of the font, so that it can be used to shape writings or logos, that update in real time by changing the font.

How to change the display size to a larger size to reduce the blank background. to use as much background space as possible.creo system conversion to jpeg and new uses of space Thanks