Creo+ and Creo Parametric

Hi I'm trying to create an offset section (See the pic attached). While showing the section on drawing, I'm not getting the hatch properly.     

Check out this video on Creo Harness Manufacturing Extension from PTC & Virtual Interconnect. Presenters: Tom Quaglia (Solution Consultant, Fellow), Kieran Gilhooley (Software Development Manager, Virtual Interconnect), Scott Ferguson (Project Development Manager, Virtual Interconnect) Original Date Presented: June 26th,  2025.  

Hello, I have an assembly that uses various lengths of raw materials. To indicate this, we list the raw material and what length to cut it at. We currently have it set up so there is a special "CUT_LENGTH" parameter controlling this length for use with pre-defined flexibility and easy identification of the driving parameters. We want to add this parameter to the CONFIG.PRO file so we don't have to manually add this parameter in every time. When doing so, it defaults to a "0" when not being used (which is ok) but it shows this in the custom BOM, so we end up having to delete the parameter per each item. Instead of having to delete said parameter, we would like to have it controlled by a relation that basically says "If the cut length is equal to 0, replace the value in the BOM with a blank, but leave all other cells alone." I can get it to edit all of the cells where the "CUT_LENGTH" parameter is shown at once with no issue. But when I try to specify which ones to change/leave alone, Cr

I am using Creo Parametric Release 2.0 and DatecodeM250スケッチモードに入ると強制終了してしまう。既存パートでも新規パートでも起こってしまう。

Hi, I've been struggling to find a straightforward way to export quilts directly to Blender, without having to go through additional software. Isn't there a way to export quilts in common polygon formats like glTF, FBX, OBJ, or STL? All other software I’ve used offers smooth export options without these extra steps. Why does PTC make this process so complicated for users? I'm using CREO 11 & 12

Can anyone provide an example of how to apply the InMixedState attribute to a Radio Group?  I want to create a radio group with two selections AND I do not want a default item preselected. I want to force the user to pick one. I my example image below, item one is selected. I want neither to be selected.  The Creo UI Editor documentation seems to indicate this is possible by setting InMixedState. I just can't figure out how to do it.   

I'm trying to build a CREO Mechanism for lead screw, I'm using Slot connection to define the lead screw mechanism. Now I'm running a dynamic analysis by selecting friction in external loads options. but im unable to input the friction value. Does creo assume a value, or can  I input a value

I Designed a conical spring in Creo Parametric and am attempting to do analysis on the spring. When I applied the constraints and forces on the spring and ran the analysis, the analysis failed and said problems were encountered while preprocessing the features for the highlighted surface. Only the middle section of the spring is highlighted as part of the error. Can anyone help me as to why this may have happened

Creo Parametric 10I want to make a keyboard shortcut, which can change windows, so shortcut for this button here.I have tried go to options, customize, and keyboard shortcut. But I only found other things like save, activate...But windows isn't here.Mapkey also don't work.Every time changing parts or assemblys have to click to this button is not quick, so it is better to have a shortcut.Can someone help? Thanks. 

Hi Community, We set-up a family table of our screws and wanted to add this now to IFX.For local tests, I saved the generic to ...\Common Files\ifx\parts\ifx_fastener_archive\nb__312350pxxxx.prt The .dat file looks like this: !--------------------------------------------------------! Sechskantschraube! Hexagon head screw!--------------------------------------------------------SCREWTYPE 20UNIT MMSURFACE 763AXIS 745CBSCR DIN974-2 R1INFO SCR-HEX-ISO4017-A2-70!Enter the name of the Family Table Part!---------------------------------------FAMPRT nb__312350pxxxxSYMBOL STRING DN LG B S K DG PINSTANCE STRING DN LG B S K DG P#FAMTAB M<DN> d58 d57 d57 d20 d19 d70 pitch When I now want to add a screw I have a weird behavior:1. When the generic is not opened in Creo, I don't see any thread size in the drop down, but lengths.2. When the generic is opened, I see the correct Thread sizes and lengths in the pop-up window. But independent what I select in this pop-up, it alway

Here is a free Tutorial for Creo Simulate Elite (Creo Design Essentials User).   3 x part in Creo 11 HomeUse or 3 x part as STEP

It was saved in teamcenter. While opening from teamcenter image is not visible only dimension is visible. 

In creo view 5 or 6 or 7 the stereoscopic will support active or passive or both to view the models. If Available, please share me any reference documents related to this.

I found a nearly 4 year old post saying this was not possible. I am asking again because I have read about updates to simplified reps in more recent revisions.   Does anyone know if Creo 4 and Creo 5 includes the ability to update the mass of a part relative to an active simplified rep?    Thanks in advance.

Hi, me an my team are using Creo Parametric 10.0   We are trying to export our drawing file to pdf for a technical document, but everytime we do, even with different export settings, once the pdf is created we can see that the notes are ok but the views of the part result front-view only and stretched. We originally set 4 views: Front, RSide, Top and 3/4 so we're confused.   We don't get what may cause this issue since the first export was just fine, but from the 2nd on the mess began, we also tried with different files and it happens still.   The same thing won't happen with .png or .tiff export but the image quality is poor so the use it's no option.   Any suggestion? Thanks in advance.  

Came across this unseen ICON . Any one can throw some light on this one? Thx in advance.SEE ATTACH

In Creo, I'm getting lot of Windchill Icons just above the  model tree. Please let me know if anyone see this issue. Usually we will get one Windchill icon for one part right. but I'm getting Creo window with lot of Windchill icons as below. Please some one help me on this.   Thank youKumar B

 Hi everyone, I just got access to Creo 11 and I'm struggling with one of the new features they added.For this model I want to use 4 axis HSM, however even if I select the B axis as rotatory (which means it rotates around the Y axis) the machining area I can select is always a cylinder around the Z axis and I can't figure out how to change it. My work center settings also specify it revolves around the Y axis but it just doesn't allow me to change the axis of the machining area. Any idea on how to solve this?

Hi, is the current lmadmin upgrade path, really uninstalling the old version and installing the new version from scratch?In the past the setup recognized the old installation and upgraded it. at least a few years ago.br Bernhard

Hello all,I noticed that after creating the drawing changing font of the annotation doesn't affect the embedded symbols like plus minus sign or diameter sign. For example dimension font is set as arial WGL first:But setting it to CG times, only the dimension numbers (23 and 0.1) is changing but not symbols:Is there a way to set font format for all symbols effecting the annotation on drawing?Thank you for your support.Have a nice day.

I am using Creo 9.I have received a large step file with over 1k components, I have imported it successfully and now I need to rename some of the files. I tried to use "Use template" option - no matter what I choose to do - the generation of file names would wipe out all of the values in the "New File Name" column (see screenshot attached). I tried  asterisk symbol in front, at the end, or both in front and after the characters i need to replace; i also tried using suffixes and not using suffixes for the new file name. I also tried File > Save, edit file list in excel, and then import it back, but it doesn't apply the renaming when importing.I see most of the problems with file names being too long, but I can't remove sections of file names using template. For example, i need to replace "STEEL" in the names of the files with "S" in 200 files, but no matter what I do I can't make it work. If i use "Template" then it wipes out all names, or if I Export the file nam

I am using Creo Simulate Release N/A and DatecodeN/ADie Modalanalyse ergab 58 Eigenmoden. Danach möchte ich eine dynamische Analyse im Zeitbereich machen (um die Erregerkräfte in die Struktur einspielen zu können). Wie gewohnt natürlich im Reiter "Vorherige Analyse" die besagte Modalanalyse gewählt. Weiters möchte ich die Dämpfungskoeffizienten für jeden Eigenmode individuell eingeben ... also dementsprechend eingestellt ... und ich hätte erwartet, dass ich nun 58 Eingabemöglichkeiten bekomme. Leider wurden mir nur 4 Eingabemöglichkeiten (für die ersten 4 Eigenmoden) angeboten.Woran könnte dies liegen?Habe derartige Berechnungen schon öfter gemacht und konnte bis jetzt auch die Dämpfungskoeffizienten immer individuell einstellen.Danke schön für Hilfe.SG Markus Plainer

I am making a spline in a part based on a large collection of points I am creating from a file.  When I assemble this part into an assembly I want to know the location of these points relative to the assembly coordinate system.  Is there a way for me to measure the x,y,z distance from the assembly coordinate system to those points all at once instead of having to do hundreds of individual measure commands?  Creo Parametric 8.0.5.0

Creo Parametric 10.0.5.0 I am trying to create a plug weld. I have had success with several on one side of the weldment, but when I try to create the plug welds on the opposite side the weld seems to project to the opposite side. I have tried using the opposite surface of the red surface, but it just projects to the opposite side of the weldment.  

to whom it may concern... Hi there, I recently installed Creo Parametric 10.0.8.0.As it turned out, the debug console, you can activate by adding "set CEF_DEBUG_PORT=9222" to your start command is broken in the latest release of Creo 10. Usually, You get debug information displayed, when You open "http://localhost:9222/" on the computer running Creo Parametric.In 10.0.8.0 that address just shows a blank page (NO "This site can’t be reached" error !).In 10.0.7.0 everything works as intended. I tested this on several machines. Also tried to install both versions parallel. But to get the console working again, I had to uninstall Creo completely and reinstall 10.0.7.0 again.