PTC Education Forum

I had to reinstall the program several times due to an error on my laptop, it finally worked. I wanted to make a video to show my colleagues how to install it so that it doesn't cause problems. The thing is, when I tried to reinstall the license, I got the following error. You have reached the maximum number of license requests available for your product type. I contacted my Uni, they told me to contact PTC, but I can't access the eSupport because I have to upgrade my account using a client number which I don't have, my uni only have given me the licence number. I need the program to make my lab practices. It would be helpful if some of the support members of PTC could reach me and do the MAC thing to my laptop, I've read on the forum and I know that it's possible to reactivate the max num of requests. Thanks. 

I installed creo 12.4 student edition yesterday but when i start new manufacturing part it tries opening but doesn't do anything, pls help thank you

not opening creo 9 software

Hello PTC community. I've found myself in a very peculiar situation that's been puzzling me for weeks now. I rely heavily on Creo for assignments and everyday projects, so any help from experienced users would be fantastic. Here's the rundown: Several months ago, I decided to perform a fresh reinstall of Creo 11 after the application began freezing and crashing my laptop at startup. However, after following the installation guide (provided by my uni), I encountered the same problem: more crashes and freezes. My teacher suggested uninstalling/reinstalling V12. Against all expectations, this backfired: not only did I begin to experience licensing compatibility issues with V12, but the V11 reinstaller began to fault, with various error messages and failed downloads. Fast forward a few weeks, and I'm still struggling with the same issues, and can hardly get Creo to download on my computer again... I'm honestly hopeless at this point. If someone has had similar problems or can dir

Installed Creo 12 student edition. Upon first install, some issues arose and application icon did not load, likely due to not disabling Windows firewall and defender. Performed 'clean' uninstall using Windows 11 control panel. Reinstallation was only partial, had issues opening .prt files and setting file directory inside Creo, but could still sketch and somewhat operate .prt after creating a copy. However, only some parts would save. Performed another uninstall, this time deleting PTC keys and manually deleting empty files in files explorer. Unzipped zip file in its own folder in C drive. Followed setup after running as admin. Creo common files and parametric did not install: "Prerequisite for Creo Parametric -- Creo 12 Platform Services -- is not satisfied."After looking for solutions online I am not sure what steps are best to take, and I would like to avoid messing with registry keys again if possible.

Hi everyone, I’m working on a Random Vibration Analysis in Creo Simulate for a 6U-XL CubeSat structure, which is mounted inside a deployer and tested on a shaker table. So far, I’ve successfully completed the Modal Analysis: - I constrained the side rails (interfaces with deployer). - Assigned material to the structure. - Used point masses for each unit to replicate the payloads, and added weighted links to distribute the masses. - Element mesh was created using AutoGEM (solid) Now, I’m moving to the Random Vibration (PSD) Analysis and have a few questions I hope someone can help with:- I’m applying an enforced motion (base excitation) on the constrained rail surfaces, simulating the shaker input. Is this the right approach for replicating a vibration test inside a deployer?- I used weighted links to connect the point masses to the payload mounting holes. The holes are not constrained (only the rails are). Is that correct, or should the payload attachment holes be constrained

When I arrive at step 2 of the installation process, there is nothing for me to download.This is what comes up and do not know how to proceed."According to our records, there are no products entitled to software updates.Due to recent changes in our Mathcad products, an entitlement to Mathcad Prime 7.0 has been added to the license file as a new serviceable item. For customers using floating licenses to serve multiple versions of Mathcad, this will enable you to checkout more licenses than you are entitled to. This is a temporary situation, as the serviceable item for Prime 6.0 and earlier versions is no longer distributed by PTC for new or renewed subscriptions (refer to the Mathcad Upgrade Page for more information). The Customer is responsible for ensuring that you do not use more licenses than you have purchased, and you will not be able to rely on the license file to manage that compliance for you. If assistance is needed, please use the Case Logger to open a ticket with PTC Techni

I purchased the "Mathcad Prime 11 Student Edition One-time License" and I am unable to download the software. I am unable to open a support case due to "insufficient privileges." Other times I am denied access and when I click help on the global representative link, it takes to a page that does not even open. I have already made a post on the PTC community, but have gotten no replies, I am not sure what else I can do.

Hello everyone.is there a way i can get the dimentions of a feature from creopyson api?for example in the image  from a feature if i click on feature information i get get that it has dimention with id d170 and value 8.now is there a way to get this information using the api ?i can get the feature and its paramters but not dimentions.and i also can get the dimentions and their values but not their parent featuresim using creo 8creopyson 0.7.8Thanks  

I am a college student and I have been using MathCad for quite a while. My old license expired in October, and I am now in a class that requires MathCad 11, so I just purchased a student license for it. I have MathCad 10 on my computer, but not 11. When I went to download the image to get 11, it told me there were no products entitled to software updates. I do not want to activate the license on 10 because I need it to be compatible with 11. How to I download 11 onto my computer so I can activate the license?

I am a college student and I have been using MathCad for quite a while. My old license expired in October, and I am now in a class that requires MathCad 11, so I just purchased a student license for it. I have MathCad 10 on my computer, but not 11. When I went to download the image to get 11, it told me there were no products entitled to software updates. I do not want to activate the license on 10 because I need it to be compatible with 11. How to I download 11 onto my computer so I can activate the license?

I am trying to install Creo PTC and have come to the part where is ask for the node locked license genration, which i have, however when i type or paste the sales order its giving me an error saying invalid product code.  any idea why this might be, also to add i have the student version

license server

hi! just downloaded creo 6.0 (student) and when I start the program an error messages appears (shown in the attached files). Any suggestions is much appreciated!  

Hello, i am a student using Creo 10 and geniustools 11. I followed a set of instructions but now i cannot create parts in creo. It gives me an error saying im apparently using a commercial version of creo despite having an academic/student license. Then it closes the application. Does anyone know how to fix this ?

我想要联系AR项目，需要申请vuforia studio教育版，我没有学校邮箱

We recently started to use Creo in my engineering course. As I went to download the software I got a little bit confused why there is no MacOs version of Creo available. I am aware that there are some workarounds for that e.g. using Parallels etc. but I read this might not be the way to go because Creo does not work that well on a Windows emulator and Parallels is also not free (and I am broke). Also, I read about installing a Windows partition with bootcamp, but this only works with an Intel chip and the newer Macs (mine included) have the M1/M2 chip installed. So this isn't an option either (for all of you lucky ones that do have the Intel chip: bootcamp seems to be the best option here).  Does somebody know if there will be a Creo MacOs version in the near future? Creo seems to be the industry standard and I honestly don't understand why there is no MacOs version available yet seeing that many designers like to work on Mac machines and especially the newer ones s

i had mathcad 10 as student license i have tried to upgrade to 11 and now my mathcad is a 30 days trailcan i upgrade ?

Hello. I've started using Creo 6.0 for my studies and school, however I quickly encountered a problem only I seem to have. I don't know if I'm simply doing a basic mistake or anything but when I want to change the dimension between the 2 opposite sides of an hexagon, the tool does nothing. I selected the 2 sides. Does anyone know how I can fix this? I also can't switch to creo 7.0 due to the license provided by the school being only for version 6.

my trail license has expired, but i forgot to change in to student edition license. How can i get in to student edition?

Hey everyone, I just signed up for the Student License, but unfortunately, the license file came without any information on how to proceed with it. I saved the file under Programme Data /PTC/Licensing, and added the license path in the setup wizard. But when I open Creo, only the free test version gets opened (which does not work either, because the embedded browser couldn't be initialized). I tried to use the product key of an old Creo version (4), but this does not work for Creo 12. Could anyone help out with the product key for the student license of Creo 12?Thank you very much!Best regards, Julian  

I am installing Creo University edition and I entered BK120908EDUNIVERSITYED under sales number order or product code. It didn't go through and displays ERROR in red.

Hello, i want to install creo 9 University edition for my studies. When I entered BK120908EDUNIVERSITYED under sales number order or product code. It didn't go through and displays ERROR in red.Same with the BK900908EDSTUDENTEDUNI code which some people of my university used. I alredy had creo and my licence expired so i needed to install it again and i have already done it with the second sales number. But this time, it says "error" to me. 

Hello,I am currently working with Creo Parametric (Educational Edition version 11) and encountered an issue regarding the default file-saving location. After creating a few models, I found that files were being saved to C:\Users\<username>\OneDrive\Documents instead of the folder I selected in This PC\Documents. To resolve this, I moved all the Creo files from OneDrive to a new folder located at C:\Users\<username> and updated my working directory settings in Creo accordingly.After doing so, I deleted the OneDrive folder from C:\Users\<username>. However, when I relaunched Creo, I received error messages (image uploaded), even though everything appears to be working properly—I can create new models and edit existing ones without issues.Could you provide guidance on how to fix this issue or if there's anything I missed in the process? Should I expect any future problems as a result of these error messages, or is this something I can safely ignore?Thank you for your tim

I am a student at the Faculty of Industrial Engineering and Robotics (FIIR) at the Polytechnic University of Bucharest. I have a license from my school, it is valid but creo 12.4.0.0 does not recognize it, i have removed it once and reinstalled it. Please help me.