Solved

Hi,Why is it written that for subscript in text one needs to press ctrl+- and for superscript in text one needs to press ctrl++, while if someone press ctrl+- and ctrl++ it comes out of the way of being able to use subscript and superscript in the text. Is this indication written wrongly?  

Given an ellipse E in the Cartesian coordinate system with the semi-axes a > b and the equationx^2/a^2 + y^2/b^2 = 1. A chord AB of fixed length s < 2*b is considered. Let the point P be fixed on the chord so that the chord is divided into the segments AP = u and PB = v, i.e. u + v = s. The points A and B should now be moved on the periphery of the ellipse in a rotational direction while maintaining the chord length s and its pitch P in u and v. During this movement, point P describes a closed curve K.The content of the annular area bounded by E and K is sought.

This, right here:  --> Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?PTC Community 2024-01-082. What is the problem?For example, take a look at this screenshot of what are probably some very good ideas, chosen at random.  There are three lines of text previewed for each one.  How useful is the preview to you?  This is the result of the template for new ideas, which was created as part of the "great archive effort", also known as "resetting the clock on ideas that really should have been implemented by now".  We're now required to answer these questions, and while the information is useful, it is all collected as text and presented, along with the questions, all smashed together in the preview.  3. Are you using a workaround? If yes, please describe it.Either vote or ignore while staying uninformed about the actual idea, or load it in another tab.4. What is the use case fo

Hello. Not sure if this is the right place to post. I recently downloaded Windchill Modeler 10.0 and have been going through the tutorial. When I got to the simulation section of the tutorial and tried to run the Speed Controller, I got an error message saying that Visual Studio is no longer supported. What is the workaround? Thanks.

I am using Creo 8, and I am having problems publishing an AR experience of one of our larger assemblies, it fails, but I do not get any helpful feedback from the status bar or the popups  is there a better way to see why it is failing? I have been able to publish this assembly in the past, during a round of checks from my team we found a couple issues that were fixed on the Creo side, but when trying to publish again it is failing. I have tried to publish other smaller assemblies and they are hit or miss, I have published single part files and it is also hit or miss. I checked and it is not a firewall issue from what I can tell, but going to the https://app.ar-design.ptc.io/ site is very slow and occasionally will error out.   Thanks!

I have added a number of tags to the device. But when I open the quick client, I get an Unknown value and Bad quality. This is for an Omron PLC and the addresses are like GSR_NXTC.S_READ.AS_TC[0].S_CH[0].N_PV. Also, when I click on "Launch Quick Client Here" I get 5 times as many tags as I want. I have to delete unwanted tags. But if I make a change they all come back. There are 53277 items. I only need about 30 of them. All the other stuff is un-needed. Is there another way to handle editing? It doesn't appear to be able to be done from the Quick Client. KepserverEx 6.14 

Why is the PTC process so convoluted?😫😫  This is the reason I never use PRIME and stick with MATHCAD 15.  I am one of the respondents totally disgusted with PTC as noted on this forum thread.https://community.ptc.com/t5/Mathcad-Installation/MathCad-15-permanent-Product-Codes-no-longer-verified-by-PTC/td-p/815892 In order to help a friend decide on PRIME, I downloaded MATHCAD EXPRESS,  actually PRIME 10 30 day trial.  It supposedly installed because there is a PRIME 10 exe file.  I downloaded the license from my email.  When I try to run MATHCAD PRIME 10 for the 30 day trial nothing happens when I click on the MathcadPrime.exe file in the PRIME 10 folder in Program files.  It never asks for a license; it never installed a desktop icon.  It never showed up in my Start Menu.  Their so called instruction guide is pages long with no succinct summary.  I don't have time to study a lengthy installation guide for such a convoluted p

I have MC Prime 9.0 and I've just install MC 10.0When I try to open existing worksheet (created previously with 9.0) it does not open with MC 10 but with MC 9.0.When I create and save new worksheet in MC 10 and try to open later on it, it tries to open it with MC 9.To open it in MC 10 I have to open blank worksheet first and then load desired file, kind of annoying.How to force opening old and new worksheets with MC 10? Do I have to remove/disable MC 9?

I was writing up the one of the Mathcad examples for CHAPTER 8: Earth Retaining Structures8.2 Reinforced Concrete Retaining Walls with Sloping Backhill. Could you please help me finding why the error massage was showing up?

  Can you please help me solve this issue? I don't see any faults on equation. Please let me know if I am overlooking at something. Thank you. 

I NEED HELP TO UNDERSTAND WHAT THESE CIRCLES ARE ON THE SKETCH LINES.  EVERYTHING LOOKS GOOD, CLOSED LOOP AND COMPLETE CLOSED LOOP PROJECTION OF THE SKETCH LINES I AM TRYING TO PROJECT A SKETCH TO OFFSET A CURVED SURFACE, AND AN ODD SURFACE (SEE PICTURES).  THESE ARE THE STEPS I'VE TAKEN:* SKETCH* PROJECT SKETCH (I ENSURED ALL PARTS OF THE PROJECTION WERE CONNECTED, AND ON ALL SURFACE(S) OF THE PROJECTION)* SKETCH-PROJECT SKETCH (SKETCH SHOWS IT IS A COMPLETE LOOP(S))* OFFSET- EXPAND (SELECTED ALL SURFACES)NOTHING, I CANNOT GET EITHER A POSITIVE OR NEGATIVE EXPANSION (OFFSET ABORTED; GEOMETRY COULD NOT BE CONSTRUCTED)I DO NOT SEE THESE CIRCLES IN THE ORIGINAL SKETCH THE GREEN OUTLINE IS ONE AREA TO PROJECT TO FOR AN OFFSET, AND THE ORANGE AREA IS ANOTHER YOUR HELP IS APPRECIATEDAIRMAN DILLARD

Hello Previously I got a link where i was able to get sample entities for Grid to utilize dynamic configuration. Can some one please provide the same or may be can share any sample entities to set columns dynamically. Thanks

Hello I am not able to apply Filter in Data table mashup in Thingworx 9.4Any help will be appreciated Thanks

I am using Creo Parametric Release 8.0 and Datecode8.0.6.0During the rebuild of 2 separate parts I use edit references to walk through the model tree and re-define the references of each feature.For one part it works fine, but in the other part I encounter problems.Creo crashes using edit references. When using edit definition to re-define the features creo does not crash.How is this possible?What can be the root cause?Here are the errors that I facedFatal error encountered.

I have a 3D frame model and I want to add mass to a point to locate the CG of a component.  The Help section says to use the Refine Model --> Mass function to do this, but I haven't been able to locate that function on the Ribbon, or in any of the Toolbars.  Where is this located? https://support.ptc.com/help/creo/creo_pma/r10.0/usascii/index.html#page/simulate/simulate/add_mass_pt.html

Need urgent help to deactivate the License for PTC MKS Tool Kit for Developer in server EBSCLONE2 (192.168.104.216)

Hi Guys,I am looking for AutoCAD CAD worker configuration, i can't able to see the AutoCAD name in CAD worker Type. Regards,AJ

Hello, Please let me know if PTC still officially supports Mathcad Prime 7. Is there any official PTC link where it is stated that this version of the Mathcad Prime software is officially supported? Warm RegardsVijay

I have a ticket open with support but my guess is that the community may have an answer first (again). New available entries in enumeration table are displayed correctly in the enumeration but are displayed in the Remove table when viewed from the Managed Type attribute that uses that Global Enumeration value list.   We are on Version 11, M020. The global reusable enumeration is at site. Its a list of project numbers ( 1234 - Name of project). This table has a list of selectable values on the left and a list of removed on the right. The left can be selected, both can be searched if those on the right have been used on a CR, Document etc. You know how it is suppose to work 🙂 What is happening is I can move the items from the left column (selectable) to the right (not selectable) and the table when used displays these changes. All good. But, any new value added to the left is displayed in that Managed Attribute table (save, done) but then it does not displ

Have noticed big efficiency problems during our DevOps are preparing all their starts and write/checks their scripts and I try to use Composer.Normally server works correctly, reaction on anything is "immediate", mostly <1 sec delay, sometimes can happens 5-10 seconds delay in reaction on saving, opening entities, etc. But longer delay happens... once per hour?When DevOps tests are made... it takes 1-2 minute to load page, sometimes even 5 minutes.Is that normal? Any solutions (different than organisational/time slot reservation for DevOpS and developers)?

Hello,with the service: result = Things[thingName].GetServiceDefinitions({    category: category /* STRING */, ,    type: undefined /* BASETYPENAME */, ,    dataShape: undefined /* DATASHAPENAME */}); i can get all servicedefinitons of services of a special category.But which Sting do I need to use if i want to get all uncategoriezed services?I've tried *Uncategoriezed*", "'Uncategoriezed*", "**Uncategoriezed**", " ", "", "uncategoriezed", "*uncategoriezed*", "**uncategoriezed**", nothing.All of them are wrong.Does anyone have any idea what the right string is? We use thingworx 9.1.8 and 9.3.7.

Every 30 minutes, without fail, my Application Log is inundated with 22 SystemMetricLogRepository messages at the Warning level. This can make it hard to read my own error logs and has become a source of frustration for me. Is there any way I can make it so that I don't see these logs, reduce them down to a single Debug/Trace level message that tells me the metrics were measured, or have them be set to the Debug/Trace level altogether so they are out of my usual log viewing level?

Hi,I am making something wrong? Are only 3 differential equations... But using laplace command this system of differential eq can be solved:   See MCP9 file attached.

Good morning,I would like to convert xmcd files to mcdx format.I have Mathcad 15 software and a trial version of Mathcad Prime.The conversion is refused, probably because Mathcad Prime is a trial version.Could anyone convert them for me? I have about 15 files.Thanks in advanceRichard

I had configured SSO to ThingWorx(which had SSH configured) using Azure AD SAML authentication.Now I want to setup SSO for ThingWorx with no SSH configured. And I found somewhere that it had to be done without using SAML authentication. Need suggestion on how to achieve this.