Solved

I have a specific case where a part is present in the model but i am do not want it in the BOM table. Unfortunately the part is referenced by a lot of other parts hence suppressing or deleting it is not an option. I tried to strike through for the person reading the drawing to not add it but its weight is added in the total. I want that to update. Any ideas?

I have just discovered the "Release Changeables" activity, in the Change Notice workflow, will terminate any existing running workflow on any of its Resulting Objects. These are workflows in which its primary business object is a Resulting Object (eg a wtpart) on the Change Notice.   More specifically it is this line of code that is doing this: com.ptc.windchill.pdmlink.change.server.impl.WorkflowProcessHelper.releaseChangeables((wt.change2.WTChangeOrder2)primaryBusinessObject);   Setting the com.ptc.windchill.pdmlink.change.server.impl.WorkflowProcessHelper.releaseChangeables logger to debug and the running the WorkflowProcessHelper.releaseChangeables(ecn) results in "Attempting to terminate workflow process..." lines in the MethodServer log. eg: 2022-09-09 11:21:45,071 DEBUG [ajp-nio-127.0.0.1-8010-exec-1] com.ptc.windchill.pdmlink.change.server.impl.WorkflowProcessHelper wcadmin - Attempting to terminate workflow process for: wt.epm.EPMDocument:24392792692022-09-

Hello, I've reached a point on my calculation where I'm stumped and I'm hoping one of you can help. I'm admittedly not the most knowledgeable when it comes to solve blocks. I'm attempting to find the biaxial bending moment of the column/pedestal and cannot get the solve block to find the correct answer. I've tried different iterations of the solve block where I've defined every constraint, but I've wittled it down for this worksheet. Essentially, I'm looking for a point where the axial force and moment ratios are equal in the column. I've attached my worksheet. Any guidance you guys would have would be appeciated!

Hi all, there is a sample code taken from PTC that should open file via jlink. But unfortunately I Receive an error.Any idea how to fix it in Creo 7?? 

I used to be able to edit the Windows Registry to have Styler open as the default program for *.xml/*.dita files. However, since Windows 2007, the registry is has changed, so I can't figure-out how to do this "hack" anymore. So, I have to launch Styler first, then open a *.xml/*.dita file. Has anyone figured out how to set Styler as the default program? (I'm on Arbortext 6.1 if that makes any difference). Thanks, Todd

I have a vector [A], which can have any number of even rows and will contain only zeros or ones in each element. I would then like to create another vector [B], which will always have one more than half the number of rows in [A]. The top row element of [B] is always 1, and the following elements depend on the corresponding pairs of elements in [A], working from top to bottom. The element of [B] should be zero only if both the corresponding two elements of [A] are zero, otherwise it should be one. Something like this for a 4 row [A] and 3 row [B]: And for a 6 row [A] and 4 row [B]: Hopefully someone can help me out!Thanks.

Hi All.Our firm has two full Mathcad Prime licences, however, would like to use the unit conversion on another computer.We think of having the free Mathcad Express on the third PC, but we are puzzled if it's free for commercial use also.Could someone please clarify?Thanks

I am using Creo Direct Release 5.0 and Datecode5.0.2.0借用许可无法正常归还，客户端无法正常使用。许可借用出服务器到客户端上，无法提前归还。The borrowing license cannot be returned normally, and the client cannot be used normally. The license is borrowed from the server to the client and cannot be returned in advance.

Hello, can we get the length measurement in Creo Illustrate as in Creo View ? Thanks 

I am trying to add Custom Attribute to CreateMultiplePart Wizard . This attribute is a picker . Based on the selected Type of WTPart Part , it should populate the Attribute "Parent Part" , where User should be able to search the parent part Name  . CreateMultiplePart Wiz 's defineItem.jspf page controls the wiz definition . Any changes there , also gets applied to CreateNewPart wiz. Please suggest a right approach . 

As per the original post.    Hi, Can someone please help me convert the files in this folder to MathCad Prime 7 files?Thanks!

When attempting to run the installer, the error "Unable to launch installer. Please check your network connection". I have an assignment due in school using this software so this is urgent. Thank you.

Hello @slangley we have the same issue for all our mashups after migrating to 9.3.4. We have more than 100 mashups.The button is not working on any of those. Can you assist?

Hi community, I am trying to display duration (difference between 2 dates). I converted it from decimal hours to hours.The problem I am now facing is the minutes are not displaying. The duration only changes after an hour.  Below is the code that I have written. Does someone know How I can solve this problem.  var decimalTime = parseFloat(duration);decimalTime = decimalTime * 60 * 60;var hours = Math.floor((decimalTime / (60 * 60)));decimalTime = decimalTime - (hours * 60 * 60);var minutes = Math.floor((decimalTime / 60));decimalTime = decimalTime - (minutes * 60);var seconds = Math.round(decimalTime);if(hours < 10){hours = "0" + hours;}if(minutes < 10){minutes = "0" + minutes;}let result = ("" + hours + ":" + minutes); The desired output should be e.g., 16:00. Then after two minutes I should see 16:02. However currently I am only seeing a change after an hour (i.e. 17:00 after sixty minutes). Many thanks

I'm checking a students results and for some reason his result has vector of "[1 x 1]" instead of showing the element values of this simple 3 element vector.  I disabled the students and entered the equation myself (in red) and it shows correct results (except they are still inside square brackets for some reason.    Whats the deal?  

I am using Creo Parametric - Release 8.0 (connected) Release 8.0 and Datecode8.0.5.0Cross section cutting lines don't appear correctly when exporting PDF. The dots and dashes look too short.This is what I'm getting https://drive.google.com/file/d/12AUXgavN0PHAdR7DDriC-8zjtaAcv0zH/view?usp=sharingThis is the desired result https://drive.google.com/file/d/1_FPd2YIHyBwxyVX0UdCaJEMIEKQC_e9J/view?usp=sharing

Hi, We use windchill 10.1 M040, now we facing a request with epmdocument publish, some Creo drawing(.drw) has representation already, users want system gererate extra both .pdf and .dxf automatically. We have built worker for this purpose but didn't know how to do it by WVS Job Scheduler Administration, is anyone could do me a favor ?

Hi , Kindly suggest where to find the Edit script( script editor ) option in Mathcad prime 8; which was earlier available in insert menu under control tab in Mathcad 15Have attached images for reference below1.2.3.

 I was trying to create an isolated small surface "region" in a big surface like the small rectangular surface patch on the above enclosure. I am going to export its step file into ANSYS then mesh the small patch and name it as "leak inlet", so that it can be used in CFD simulation as an inlet BC. However, there is no document or instructions on how to do it. My real "enclosure" is very complicated. I failed to export its step file into SpaceClaimer or ModelDesigner, therefore "imprint" is not available. If the small surface region can be created in CREO (just like in Simulate) then export to ANSYS mesh tool, everything becomes easy. Is there anyway to create this small surface region in CREO? Thanks.

Hello,What is the easiest method to export a BOM reports to use in Arbortext IsoDraw?IsoDraw accepts xml files for BOM creation in specific format, and I would like to export the necessary xml file from Windchill.Thanks in advance.Kind Regards,Andaç ADAL

Hi all, Attached is an image of the mass properties window that is accessed via File > Prepare > Model Properties > Mass Properties. My mass is showing incorrectly here, as well as in the drawing, (parameter PRO_MP_MASS). Essentially, PRO_MP_MASS is not updating at all. I am calculating mass properties by regenerating (ctrl + g), and pressing calculate in the aforementioned window. In the green box, it can be seen that the Mass parameter is not necessarily calculated, but looks like it is an input as it is not greyed out like the others. In my other assemblies, this Mass parameter IS greyed out, but it is not here, for some reason. Yes, I have 'mass_property_calculate automatic' in my config.pro file. Yes, all of the subcomponents have materials specified, and have been regenerated/mass properties calculated, too. Yes, I looked on the forum for similar situations, to no avail. Any ideas for fixing this? Thank you!

Hello my friends, I need your generous help again.This is not exactly the toolkit issue, but of the possibilities of Creo Parametric itself. If you think that is the wrong place to rise it, please refer me to the right forum.So: I need to export out an .STL file from model. I use toolkit function ProIntfSliceFileWithOptionsMdlnameExport()which takes ProModel handle as parameter. It works perfectly fine, but I'm required to perform an export on several models at once. My question is how do I combine several models in one? I'm looking to the possibility of using Solid Bodies. Is this a right direction or you would recommend me any other approach?There is a one important thing I forgot to mention - all models of this are of the same geometry and belong to the same part or assembly. Thanks and BR-

Hi Folks, This is probably an easy one.  Is there any way to suppress the labels for solve blocks, or at least rotate them so they aren't such a mess?  The solve block works fine, but I don't want to use this in a presentation.  The examples in the documentation don't have the labels off to the left, so there must be some way to turn them off.Thanks 😉    

I downloaded CREO 8 as a student and used the licenses number given to me. it worked for my classmates but it is not working for me. anyone know what may be happening or what i may have done wrong?

I'm building a matrix where the off-diagonals are equal (e.g. M(1,3) = M(3,1) etc.).   Is there a way to reference the M(1,3) to populate the M(3,1) element? That way I would just need to populate the diagonal and upper triangle and below the diagonal would be completed. thanks,russ