Solved

I am trying to code ASCE7-10 table 27.6-2 to find my wind pressure of my roof but it is based on different parameters like the slope and the height and the wind speed.     Is there a way I can interpolate a table instead of having to do a bunch of matrices and interpolate each individually to find the pressure?  The image below is what i am trying to avoid, doing a bunch of matrices to then get the final answer. 

We have a large assembly, when it is being published, it seems to bog down command execution times while a user has it open in Creo. Is this related between the two operations or something else going on?

Seems like this should be something that is very easy to do, but I'm having difficulty finding out how to do it.  I have an angled bracket made out of sheet metal.  There is a 45 degree angle bend and on that bend there are two holes going through it normal to the surface.  I want to have a drawing view flat on that surface so I can dimension the hole position properly.  How do I do this?   I tried creating a view in the view manager normal to the surface with the holes and saved that view, but it doesn't come up in the drawing when I try to select a view using General View. In SolidWorks this was very easy to do, but I can't figure out how to do this in Creo.

how does Occluding work?When I turn it on, it just makes the model invisible but blocking models behind it.  Is this how it is supposed to work?  My hope would be that if a real world object moves in front of the model, it occludes it from view.

I am trying to import MED-61116-CD-081_F000_ThingWorx-Utilities-8-1-0.zip into Thingworx 8.1.1 on Ubuntu OS.Everything but one TWX_Converge_Styles_ExtensionPackage:8.1.0 extension is installed, which I assume abort the installation of the whole Utilities package.What do I need to do? To add some entitlement to my device and re-generate licence? Or else?I am trying to find out how to get:  Remote Access & Control or Software Content Management extensionsValidation Resultspropertytable_ExtensionPackage:2.0.0TWX_Converge_Styles_ExtensionPackage:8.1.0TWX_Connector_Util_ExtensionPackage:8.1.0textboxValidate_ExtensionPackage:2.0.0TWX_Converge_SFWU_Application_ExtensionPackage:8.1.0TWX_Converge_RAC_App_ExtensionPackage:8.1.0TWX_Converge_RSM_Core_ExtensionPackage:8.1.0TWX_Converge_Core_ExtensionPackage:8.1.0infotableselector_ExtensionPackage:2.0.0TWX_Converge_RSM_FileTransfer_ExtensionPackage:8.1.0TWX_BusinessProcess_ExtensionPackage:8.1.0TWX_Utils_System_L10n_ExtensionPackage:8.1.0In

Hello everyone,   I am trying to figure out how to take my side view of my fuselage and make it into an extrude with circular sides. I have tried all of the blends but I'm new to creo and I don't know what to do. I just want it to look like an egg, basically.

Hello, I use Creo Parametric 2.0. I cannot open and create sheet metal parts. When I open sheet metal parts than Creo crashes and turns off. I have been trying almost everything to fix it. I copied collogues config.pro files. I reinstalled Creo Parametric 2.0. I arranged licenses in proper order.  I set hi quality graphic card as default. I use Creo Parametric 4.0 to other projects and it works properly with sheet metal parts. Could you help me to solve this problem? Maciej

Hi Team,We want to know the existing font name which is being used in the Thingworx 8.0.3What is the way out to find the same.Another issue is we want to have our own custom font to be used for Labels captions. what is the way out to do so.We have tried to download the exiting extension "FontLabel" from Market place which also did not worked.RegardsVidyadhar Dhumal

Hello!I am used to MathCAD Prime but I am currently using MathCAD 15 for the weekend due to my computer being packed up for a move.I use a lot of text regions with inserted math regions to describe my work, for example if I wanted to type out a base formula that I do not need to calculate, but only need it to express the validity of a following equation I might type something like the following:   {If [A(x)] = [B(x)] for [x]=[0], then [D(s)]=[C(s)]}   [C(s):=s^2+4] [D(s):=C(s)]   Where {Curved brackets indicate opening a text region} and [Straight ones indicate a math region inside the text region].   Is there an easy way to do this on MathCAD 15? I only know how to start a text region but not how to start a math region inside the text box.   If there's any other easy way to use an equals sign without calculating or assigning any of the variables that would also meet my needs.   Thanks in advance!  

Dear all,   I need to solve a system of non linear equation. I have a problem with mu(theta) function: if I use this function in given-find system, mathcad not find solution, but if I set a constant value the system is solved.    How can I set the mu function, into the given-find solution to obtain the correct solution?   Best regards Stefano

Hello community, our Team uses for image search Adobe bridge CS6 and it is working fine. Every Isodraw file in Adobe bridge CS6 is showing as a thumbnail. Fine. Now, we have new group members and they uses Isodraw also. Same version, same pc. But the image search in Adobe bridge CS6 is not working. Instead the thumbnail is the programm icon shown. In the attachment there are two screenshots. How can we solve the issue? Any ideas? Regards

I used the twilio extension quite a while ago.I tried to use it again later, but I get an error.I used to remember that I had tested a text message by allowing a country code.Not now.Has anybody ever experienced the same error as me?Also, caller ID used Verified Caller IDs on the homepage.thank

Good morning everyone,   I have a problem related to WPA (Product Analytics). Particularly, with the IPC-1752A generator files: 1752Spreadsheet_ClassA.xlsm and 1752Spreadsheet_ClassD.xlsm. In order to let the suppliers fill correctly the XLM files (IPC 1752 format related to material compliance), we have to provide them the above mentioned spredsheet. The problem is that, due to the REACh Regulation, every 6 months (almost), the software WPA is updated with the newest references, but the spreadsheets above aren't updated too. In particular, the latest updates are dated as: 1752Spreadsheet_ClassA.xlsm: 12/02/2014 1752Spreadsheet_ClassD.xlsm: 05/06/2015 So it's impossible to let the suppliers fill correctly the generated XML files.   If I check the support (http://www.1752builder.com/login?next=/ ) to try to contact  the developing team, they website said this:   There are other IPC-1752 generators (http://www.ipc.org/ContentPage.

Hi,Importing wqs.extension.provider gives internal error.Can any one how to import this extension.

I have newly configured the update service during the stream's service.Given a Thing's name and attributes, it will fetch a specific one-line streamThen, based on a single line of information, change only some of the values, and then modify the stream with a specific one-line id.The problem is that services are sometimes delayed.When I think of it, is it superimposed on the moment the source changes from that user to the superuser and the stream modifications that the subscription does?Does ThingWorx not immediately modify the stream?The modification mentioned here means UpdateStreamEntryIn addition, when an entry is added to the stream, the source is set as the connected userBut after a while it turns into SuperUser. Why? thank

Hi All,   In the attached (MCP3) I am trying to define a matrix based on an existing one.    I have a series of matrixes with different index values. When I split each column to a single matrix this works but when I try to do the same for an element of a wider matrix it seems to not work. Is there a way of doing this with a snazzy programme or similar?   Andy

Man, I REALLY don't like the format of this forum anymore.  Can't find anything.  REALLy hope they resurrect the photo album section, as I think it's great for displaying techniques.   Anyone have any answers to what happened?

I'm asked for my Tomcat username/password, but nothing works.  My goal is to access the Thingworx composer. Steps taken: -Go go web browser localhost:80 -Tomcat page appears -Click on Manager app -Pop up for Username/Password appears, the password I used when setting up Tomcat doesn't work -Go into Tomcat-users.xml and add this code (below)   <tomcat-users>     <role rolename="manager-gui"/> <role rolename="manager-script"/> <user username="admin" password="password" roles="manager-gui,manager-script" />     </tomcat-users> ​-Stop/Start Tomcat and nothing works, I've tried several combinations of code and nothing.   What am I missing?   Thanks, Charlie

Hi, I want to change the color of the grid cell when it is updated

What are differences in different templates?   Is it prescribed to use specific template for some task? if yes how?   does template specific information get embedded in files?

Extract from tutorial : About Autorouting In order to automatically route cables or wires without manually choosing From and To entry ports, you must establish a logical reference. The reference can be to an XML file that is exported from PTC Creo Schematics, a Diagram file or a wire list text file in a supported format.   Does this mean that is it possible to autoroute wires in CreoParametric using logical data from CreoDiagram? I'd greatly appreciate an answer, thank you!

Import Sample ApplicationStart on the Home tab of Composer.  In the top-right of Composer, click Import/Export.Click IMPORT -> From File.In the Import From File pop-up, keep the defaults and click Choose File.Navigate to the Hello_World_Entities.twx file you previously downloaded.Select the Entities file, then click Open.  In the bottom-right of the Import From File pop-up, click the blue Import button.

Hi everybody,can someone please tell me how to upload a file on Thingworx with Postman. I created a FileRepository Thing and tried to upload the file via POST method in Postman.I tried following urls:URL: .../Thingworx/FileRepositories/<MyFileRepositoryThing>/URL: .../Thingworx/FileRepositories/<MyFileRepositoryThing>/<self created folder>/URL: .../Thingworx/Things/<MyFileRepositoryThing>/header:appKeyContent-Type(tried even differrent types)Body:file : XMLMaybe I'm doing it all wrong. It would be great if someone could help.

I am using thingWorx Utilities 8.0. Any sample or use case to create workflow

There was a topic that showed this with an accepted solution. https://community.ptc.com/t5/Welcome-How-To-s/Finally-Mark-as-read-is-available/m-p/475449 Was this for an individual topic or is there a way to do this in bulk. i.e my Creo Modeling Questions shows 106722 new post. All of the "new" ones are extremely old questions from the migration. Is there away to go in and en mass mark these all read?