Windchill

Initially posted by @AP_11420411 on April 1,2026 Version: Windchill 12.0 Use Case: Using a Query Builder report (QML), how can we extract a complete list of all WTParts and their associated AML and AVL details across all Products and Libraries?Description:Using a Query Builder report (QML), how can we extract a complete list of all WTParts and their associated AML and AVL details across all Products and Libraries? This topic and some replies were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the conversation. Learn more.April 3, 2026The Community team

This topic was initially published by ​@YA_12845300 on March 31, 2026 during the recent read-only period. We have manually republished it to preserve the integrity of the conversation. Learn more.The Community team Version: Windchill Below 11.0 Use Case: Hi, To create an arc movement between the jump between drops, in NC Assembly, there's an option called Retract_transition. You place it in the ARC_TRANSITION option and set the RETRACT_RADIUS. Following these steps from the manual, the line comes out straight, making a corner instead of an arc. I don't know why it's not arcing.Description:Hi,To create an arc movement between the jump between drops, in NC Assembly, there's an option called Retract_transition. You place it in the ARC_TRANSITION option and set the RETRACT_RADIUS. Following these steps from the manual, the line comes out straight, making a corner instead of an arc. I don't know why it's not arcing.

Version: Windchill 12.1 Use Case: Creating a demo workflow to show users that Revised items can be set from IN WORK to UNDER REVIEW at the start of the Change Request workflow.Description:Help please. Note a code guy.Just need a workflow robot to change the state of the Affected Objects on the CR that are IN WORK to UNDER REVIEW.We need the proposed changes to be locked so they cannot be edited while the Approval phase is happening on the CR. Some of the replies to this topic were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the topic. Learn more. April 3, 2026The Community team

Initially posted by ​​@bmüller on March 30,2026  Version: Windchill 13.0 Use Case: Test implementation of changes requested in https://www.ptc.com/en/support/article/CS466318 and https://www.ptc.com/en/support/article/466866Description:Hi, how can we test if the recent changes were applied correctly? is it enough to try a test URL like https://servername.local/servlet/WindchillGW/wt.wrmf.transport.httptransport.ReconnectedHttpURLCon;jsessionid=2df3/34 https://servername.local/servlet/WindchillGW/com.ptc.wvs.server.publish.Publish;jssession=234/sdf and receive a 403 Forbidden? Regards,Bernhard This topic and the replies were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the conversation. Learn more.April 3, 2026The Community team

I am using Windchill PDMLink Release 10.0 and Datecode with CPS M010Critical vulnerability (CVSS10.0) in its Windchill and FlexPLM products. Want to add the immediate remediation steps but don't understand instructions.Currently have "D:\ptc\Windchill_12.1\HTTPServer\conf\conf.d\30-app-Windchill-Auth.conf" file. Do I simply create the new 90-app-Windchill-auth.conf and ONLY put the entry that was sent in the remediation or do I copy the 30-app file renaming to 90-app and have all of my configuration settings plus remediation??? Some of the replies to this topic were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the topic. Learn more. April 2, 2026The Community team

Initially posted by ​@CM_10720949  on March 30,2026  the case and the emails we've received about these issues are not really coherent: In the email it's stated that: "If you have not installed the following CPS releases, we urge you to take the following actions immediately. CPS Releases:CPS F000 (Windchill Release 13.1.2)CPS01 (Windchill Release 13.1.1)CPS05 (Windchill Release 13.1.0)CPS07 (Windchill Release 13.0.2)CPS18 (Windchill Release 12.1.2)" while on the https://www.ptc.com/en/support/article/CS466866 it's stated:This advisory applies to all CPS versions So which one is correct? fyi we're on 12.1.2.18, and I've implemented the first mitigation, now i'm wondering if I need to do the second...  since email and CS are stating the opposite, here i am asking. This topic and the replies were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the conversation. Learn more.April 2,2026The Community team

Version: Windchill 13.0 Use Case: Hello, We are running **PTC Windchill 13 with **SolidWorks 2024 integration. Visualization files are generated through WVS using a SolidWorks worker. We are trying to optimize publishing load and would like to change the publishing strategy slightly. Our lifecycle is approximately: Concept → Prototype In Work → Prototype Released → In Work → Under Review → Released → Obsolete Goal During normal design work (In Work), every CAD check-in generates the visualization viewable (Creo View / PVZ). When the design leaves the In Work phase, the geometry should no longer change. Therefore the last check-in in In Work would effectively be the final viewable generation. After that point: the existing viewable representation should remain attached to the CAD document / WTPart it should simply carry forward to the next lifecycle states Later, when the object is promoted to Released, we only want to generate the final deliverables: PDF (drawing) DXF (if parameter DXF

Version: Windchill 13.0 Use Case: After enabling e-signature in the workflow, a user signature can be displayed in either a drawing template or a PDF generated by workers. Do I need a Creo customization, Windchill customization, or configuration specific to workers?Description:After enabling e-signature in the workflow, a user signature can be displayed in either a drawing template or a PDF generated by workers.Do I need a Creo customization, Windchill customization, or configuration specific to workers? Some of the replies to this topic were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the topic. Learn more. April 2, 2026The Community team

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.1.1Windchill and FlexPLM Critical VulnerabilityPTC has identified a critical vulnerability (CVSS 10.0) in its Windchill and FlexPLM products.This vulnerability could allow remote code execution by an unauthorized party and impacts all ver Some of the replies to this topic were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the topic. Learn more. April 2, 2026The Community team 

 This post is to explain why you see some “republishing” activity on the Windchill forum. During our recent migration, we needed to put the Community on read-only mode as part of the process to migrate the content to our new platform. We decided to leave the Windchill forum open. During the read-only period, this forum received some engagement that we could not migrate properly. However, the content is not lost. We decided to republish it after the launch. Due to the constraints of the new platform, the format is unusual. Doing this will prevent a net loss of content while allowing users to pursue their conversations as needed. 2 use cases: Topic started BEFORE the read only period. We will manually republish the posts shortly after the launch (copy / paste).Caveat:These posts appear to be authored by the Community team. They bear the date of the re-publishing but will follow the same sequence.To mitigate this problem, we are adding a disclaimer on each topic to explain the reasons for

Version: Windchill 13.0 Use Case: How to to auto clear the cache vault once the files are moved to the master vault in windchill?Description: How to to auto clear the cache vault once the files are moved to the master vault in windchill?

Using the attached QML, I was able to retrieve the users assigned to their respective licenses. However, the report is also returning the associated team roles along with the license or group names to which the licenses are mapped.Do you have any suggestions on how to exclude all team roles from the report? Although the criteria section technically allows filtering out roles, it is not practical to identify every possible role and create separate criteria entries for each one.

Version: Windchill 13.0 Use Case: To use the IFX library in the Creo for the Windchill fasteners and Also want to build standard fasteners library in the windchill from Fasteners available in the Creo IFX library.Description: Want to upload standard fasteners from the Creo IFX library to the windchill and also want IFX to fetch and use the fasteners form the windchill libraries when designer is using IFX tool in the Creo. But in the windchill the custom numbering scheme is configured for the standard parts in the windchill library. so also want to maintain that numbering scheme for the fasteners and they should be used by IFX library in the Creo when designer wants to assemble any fastener in his assembly.What configurations are needed to implement this functionality ? and how to do this ?Also is it possible to map the Creo parameter of the fastener parts directly to the windchill partslink classification attributes ? Versions : Windchill 13.0.2.6 and Creo 11.0.0.0

Version: Windchill 12.1 Use Case: What are the best practices / recommendations in terms part management practices? I'm interested what other organizations do, how many part types you manage and what they are. Our company is manufacturer / provider of industrial automation. 

Version: Windchill 12.1 Use Case: We are in windchill 12.1 and with CAD system Solidworks. What is the pre-requisite to get the "Publish AR Experience" functionality? FYI : My Admin profile has this to be shown. but the option is not visible. Any license needed like Vuforia?Description: Unable to publish AR experience from Windchill

I am using Windchill PDMLink Release 13.0.2How to create an alias on WTPart which shows the projects it is shared to.sharedVersionRef@wt.inf.sharing.SharedContainerMap~targetContainerRef^wt.inf.container.Context~Name is not showing expected result.Report is working fine though 

Version: Windchill 12.1 Use Case: We might have a requirement that will necessitate us to model the various machine setups of a machine , and use them for the operation as applicable, in the process plan.Description: Apparently, this requirement could be solutioned in many ways. for eg., 1. Use "Configurable Work Center" and use Set up variables captured as Option > Choices, then use the parameters of the process / requirements to give the setup required.2. Use Classification for the work center and pre create the instances of the work centers, with those values.3. OthersIt depends on the number of parameter variables and complexity, which I am yet to see the data. Wanted to hear from you experts on if you had come across such use cases and how was it solutioned.Even before that, I hope that Work center object can work as configurable item. Correct? ThanksHari  

I don't see the option "Add to workspace" in windchill commonspace. Other users in our organization have icon for this option at the location marked in the attached file. Is there any setting required to activate this option?Please guide me to resolve this issue.Regards,Kandarp

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.2I need assistance regarding "Important update to PTC's cybersecurity advisory regarding critical Windchill and FlexPLM vulnerabilities"PTC has identified a critical vulnerability (CVSS v3.1 10.0) in its Windchill and FlexPLM products

Version: Windchill 12.1 Use Case: Is MBD and PMI from Solidworks supported in Windchill? I know that for other CAD its supported.Description: Is MBD and PMI from Solidworks supported in Windchill? I know that for other CAD its supported.

Seems to be lack of user involvement. When you setup a Audit Log Purge Schedule task, you can pick options for what to keep. Typically, if you are purging, you want to get rid of older records, keeping only items within some time period. The criteria and frequency should align. For example, what is the point of running a purge of last year with a frequency of every two weeks?  Aside from manual dates run on a one-time schedule, the only ones that make sense would be to purge last year on a yearly schedule or Last month on a monthly schedule. No option if I want to keep last 3 months which would align with a quarterly schedule. Has anyone looked into modifying the Duration drop down for add more options?

Version: Windchill 12.1 Use Case: Dear All, In the Windchill 12.1.2.17 was possible to configure a fixed product and fixed folder path to create WTPart. I need that all WTPart will be stored automatically in one product context under specific path MyProduct -> /MaterialMasters/ElectronicComponents Can you help me to define it in OIR?Thank you EnricoDescription: Dear All,In the Windchill 12.1.2.17 was possible to configure a fixed product and fixed folder path to create WTPart.I need that all WTPart will be stored automatically in one product context under specific pathMyProduct -> /MaterialMasters/ElectronicComponentsCan you help me to define it in OIR?I tried with this sintax but it doesn't work<!-- FOLDER --> <AttrValue id="folder.id" algorithm="com.ptc.core.foundation.folder.server.impl.FolderPathAttributeAlgorithm"> <Arg>MyProduct</Arg> <Arg>/MaterialMasters/ElectronicComponents</Arg> </AttrValue>Thank youEnrico

wtpart add described document,when i fill out document number, the system don't show  document,why? when i don't fill out search condition,the system only show a few documents 

Version: Windchill 13.0 Use Case: I am trying to display attribute values over multiple lines in the 'More Attributes Info Page Layout' for a part object. Please see the attachment for a representation of what I am trying to achieve.Description: It seems this is not possible using the GUI. Can someone confirm if they have managed to achieve this or if it can be done?

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020-CPS23Windchill and FlexPLM Critical Vulnerability