CAD

school project

In the file attached (and photos below) I am trying to do the routine of finding ϕ using eigenvector and eigenvalue functions to do the same thing I did manually with A1. A2, A3 and the other matrices. Is this possible and if so can someone please help me out in doing so? Thank you!  

I can't find how to set the colour of tangent edges in the drawing. Say I have a a simple extrude with fillets (rounds) on the corners: The tangent edges (from the Round feature) appear to be green in the drawing: The tangent edges are dimmed. If i set them to be Solid instead of dimmed, then the tangent edges become black: When I print the drawing (save as PDF) it gomes through with black lines (not green). But I think i have some config.pro setting to ignore pen tables, but i can't remember exactly what exactly it can be. Anyway, it seems to be only a visual thing at the moment, but it is still doesn't look right. I looked through Creo settings, drawing settings, pen table and I seem to be unable to find anything that changes this colour. Can somebody guide me into the right direction? 

I find that the default cut list generated in a drawing on the Framework tab is very unsatisfactory; it creates a new line for each item even when many are identical, it displays the length in the same column as the part name which is not very readable, it does not display angles for mitered ends.Is there a way to customize the standard cut list or generate a satisfactory cut list in a table? I would like to display a table that does the following:1) Collapse identical members and display the quantity of each2) provide cut lengths in a separate column in fractional measurements3) provide columns with the miter angles if necessary 4) Ideally I would not display the part names at all, only the type of structural section in use. (e.g. 2x2x1/4 Tube Sq) I have not been able to locate the source of the default cut list table to see if it can be modified, and I have tried to use a repeat region table but I haven't found the syntax to use to find this information. Thanks very mu

We have P&IDs drawn as dwg files.  Each object on P&ID is a block with attributes and corresponds to a part in Windchill.  Our users view the dwgs in Creo View.I want to be able to select on a block in CV and have the user see the attributes and go to the website embedded as one of those attributes.  Right now, when I click on a block in CV, it doesn't select the block.  It selects the individual lines of the block and I can't see the block attributes anywhere. Does anyone have any ideas to make this work or what could be used to provide "smart schematics" to the users?  It should remain dwg based. thanks      

Can someone please tell me what this glyph/icon means when next to an assembly, in the model tree?(see temp.png)PTC website offers no help. Thank you.😐

Hi All,I am trying to use a While Loop with two conditions, something like below:while (x > 10) ^ (y < 100)...but Mathcad 15 only goes through the loop once and does not execute the iterations. If I use only one condition check, it works fine. Could someone let me know if it is correct to do what I show above?Thank you. 

I am using Mathcad Prime Release 8.0 and Datecode8.0.0.0adding all the elements in the array p3(y) i.e all th eelements of the columnHere are the errors that I facedadding all the elements in the array p3(y) i.e all th eelements of the column

when i run model check all the datums (planes, points, axis, curves) all become greyed out in the model tree and layers. i do not want this i want to see them at all times. i have been told that this is a default setting in Creo from PTC. is there a setting i can change for this?

I want to create a layer for hole notes at the assembly level. This is because many parts do not have a layer for hole notes. An additional problem I have is that we use Windchill and therefore some parts are on release. Does anyone have an idea to solve this?

Dear all,   We are currently working on large assembly drawings. We are encountering some troubles regarding the launch/reaction speed between the different step of the drawing (view, annotation, ...) during the creation. We see that the multi-threading is usable from the version 5.0 so can we have some advices to improve our process?     Many thanks in advance

Even though it's the same program, calculations take longer in Mathcad Prime than in Mathcad. I used a converter from Mathcad to Mathcad Prime, but does anyone know what functions take longer to calculate? Also, if there is a way to improve this, what functions should I use? If anyone has any idea, please let me know.   Translated by the moderation using Google Translate -----------------------------------------------------------------------------------------------   同じプログラムでもmathcadよりもmathcad primeの方が計算に時間がかかります。 mathcadからmathcad primeにコンバーターを使用したのですが、どのような関数が計算に時間がかかるかわかりますか？ また、改善策があるならばどんな関数を使用するとよいのでしょうか。 少しでもわかる方がいましたら教えてほしいです。

Using CREO 10 .0.4.0 When we save a drawing that has several sheets it always goes to the last sheet. This seems counterintuitive to us and my users would very much prefer to have the first sheet or the current sheet displayed once the save has happened. I looked for a config option but could only find "Default open drawing sheet"  which controls whether the 1st sheet or the last open sheet is displayed on opening a drawing. Is this just CREO 10 behaviour or is there a way to set CREO so that it doesn't default to the last sheet on saving a multi sheet drawing?

Hello everyone,could someone explain why i am getting different answers in the programs e and l.Is there a way to get same output from both the programs? Does it have something to do with for loops?the output should be like program e.Attached Mathcad 10 file.  

While performing iteration for neutral axis calculation for Doubly Reinforced Concrete beam, I suffered an error.Kindly help me ASAP.Thank you 

How to get my Product code for MathCAD 15?

I installed the student version following the instructions but once started it gives me this error and I can't use it. how can I do it?   Translated by the Community Moderation using Google Translate.    ho istallato creo versione studente seguendo le istruzioni ma una volta avviato mi da questo errore e non riesco ad usarlo. come posso fare?  

Hi All,I am new to Mathcad. I have a table where the first column is the material name and the second to fouth columns are material properties. I would like to add the table to a worksheet. When I select one of the materials, the three properties of the material will then be used in subsequent calculations. This can be done easily in Mathcad Prime 9 or 10 using Combo Box, but Mathcad 15 does not have this feature. Could someone give some guidance as to how to archieve this in Mathcad 15? Thanks in advance.

I am looking for a post processor that I can use to output cam files for a Mazak VCN510C-11  VMC machine. Does anyone have one or if not can you point me in the right direction to find one? Thank you

I need to access the Creo API, but the toolbox has proven extremely hard to set up. The directions said that in Visual Studio, it would build without errors, but there were indeed errors. From the error messages, it seems that it does not run on Visual Studio 2022 and requires Visual Studio 2015, which I'm having many other issues installing on account of it being incredibly antiquated. I am rather new to coding but need this for a project for my university. Please help if you can!

To all Pro/E WF4.0 and Creo5 gurus,Is there a way to use variables inside the paths in a config.pro file?Example: system_colors_file c:\pro\Garland\%USERNAME%\sf\syscol.sclThis does not work. Saved the syscol.scl from inside Pro/E to have old school background. Restarted Pro/E, no beuno.Weird thing is though, the one for trail file location works:trail_dir c:\pro\Garland\%USERNAME%\sfgo figureIf anyone has any insight on this I would appreciate it. I just want the users to be able to store things like system colors in default user location that is specific to only them.Thanks!This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hello Community, Using Creo View, I'm trying to insert a stamp into a model, specifically into a PVZ file, but I'm having trouble. The stamp tool button is always grayed out and can't seem to be enabled, see screenshot below. Can anyone tell me why this is happening and how I can fix it, so I can insert a stamp, as explained in the support article here: To Insert Stamp AnnotationsOn the Markup tab, in the Annotations group, click Stamp. The stamps gallery opens.In the stamps gallery, click the stamp you want to insert and point to the model view.Click where you want to place the stamp. The stamp appears in the foreground and the pointer reverts to a selection pointer. In the upper data panel View Content list, a corresponding Stamp entry appears.To move or resize the stamp in figure window, select it to display its anchor points and then perform the following actions:Move - Drag the anchor point shown in the center o

I have Mathcad 14 on an old laptop and need to deactivate its license for possible installation on a new laptop. How is this done? 

I have Mathcad 14 on an old laptop and need to deactivate its license for possible installation on a new laptop. How is this done? 

I have purchased the mathcad prime 10 student edition on last 14th Oct. But I couldn't receive any email or physical product that including product code. How can I get that?Reference number:942747636