CAD

I am trying to copy a 1xn matrix developed in mathcad prime 11 and paste it into an excel like table in ansys mechanical to build material curves for stress analysis.  I cannot for the life of me figure out how to do what seems like a simple task.  Is this an easy thing to do?

Would anyone know if you can reference the Component Feature Number (not internal feature ID) in a relation for a filter in an assembly drawing repeat region?Wanting to use features in an assembly model tree, 2 features at a time using their location in an assembly model tree to control what components are displayed in an assembly drawing BOM table on a particular sheet.Basically, if the components are between any 2 features in the model tree that I specify, I want to show them and only the quantities for the parts in the BOM table repeat region on a drawing sheet for the components that reside between the 2 features in the model tree.Features would be named Sheet_2, Sheet_3, Sheet_4, Sheet_5, etc. and could be an annotation feature, datum plane, or other feature.Repeat region filter would be if greater than feature number for Sheet_2 and less than feature number for Sheet_3 display component info and qty of part in that section of model tree in BOM table.Each drawing sheet will build

Hello,I am looking for help with an issue involving sheet metal flat patterns, Creo Parametric, and Creo View.I am using Creo Parametric 10 and Creo View 12. When I create a flat pattern of a sheet metal part in Creo Parametric, the automatically generated bounding box overall length and width dimension annotations display correctly in Creo Parametric.However, when I open the corresponding file in Creo View, those automatically generated flat pattern bounding box dimensions do not appear in the Creo View viewable state.One thing I have noticed is that if I create manual dimensions in Creo Parametric, those manual dimensions do come through and display in Creo View correctly. The issue seems to be specific to the automatically generated dimensions created during flat pattern creation.Has anyone else seen this behavior with automatically generated flat pattern bounding box dimensions not publishing or displaying in Creo View? Are there any settings, publishing options, annotation display

In Creo assembly design, is it a good practice to first validate the concept using Layout, then define a Skeleton model, and finally create parts within the assembly using skeleton references?Does this approach help avoid assembly issues, or are there better recommended workflows?

When looking at a large assembly in CreoView, is there a way to see the MBD annotations for ONLY a particular part or ONLY a particular sub-assembly?  Can you go and pick and choose what annotations to show in Creo View?

Hi,I have a file that can’t be opened by Mathcad Prime.I just get the message “File type not supported”.Anyone got any tricks to find ways to repair the file?I attached the file here in .zip format since mcdx format is not supported.

I have set up an account to download the free Creo Viewer version, for viewing only. However, when I click on download and try to enter my username: and enter my password which is the one I initially set up, it gives me an error message that the username or password is wrong. If I click on trying to reset password, it brings up a page for me to enter my suer name which is my email, then it asked me to enter the three digit numbers that are underlined in order, and when I do it, it just circles right back to me having to enter my username and the three digit code at bottom. Also please see attachments of when I try to login. The attachments are in order per the steps. 

I have old ProE workspaces but I cannot open them. I get this errorerror messageIs there anyway to open these? I know there are files in there because I was able to open them with an old copy of ProE. That is no longer an option. Any ideas?

Hello, i have problem with installation of mathcad. I couldn't go next from ,,Aplication Selection'' window so i haven't installed mathcad yet.Thanks for help.

I Create Perforatted sheet Design,Draw 4mm sq Shape and Corner in 1mm Radius,Using Direction Pattern X and Y, Regeneration process get Long Time Almost 6Hrs,How to Speed Up This Process?

I could not find any other support, so I decided to write the message here. I am a student and our school uses Mathcad 11. I received a code for Mathcad pro from my teacher, but I am unable to activate it. I downloaded the software and it shows that I have the free version, and that I can activate the pro version by clicking a button on the top right. I did that and got to the licence assistant. I logged in and put the code in, but it gives me an error message "server error" after I try to install the licence. A link leads me to here: "https://support.ptc.com/appserver/support/account/contact_customer_care.jsp", but I either don't get any help from there, or I am unable to access it due to not having the correct web account. I am unable to upgrade my web account, because I don't have the data required to do so. The only thing I have is the code and the need to get this app so i can work with it in school.

Alguna persona que tenga acceso a MathCad que me pueda abrir un documento y enviarme los datos que tengo mi PC dañadahttps://drive.google.com/file/d/1S8_3PWGeUnYfnA4jiGYNd6JJ-22kekP5/view?usp=drivesdk

I want to buy Mathcad Prime but I can't login to purchase. I have created an account. When I click "buy now" it opens a new tab with a login screen. I enter my information and it says "invalid username or password". I have reset it several times and after completing the reset I can see that I'm logged in because my name appears in the upper right hand corner. When I go back to the store to purchase the license, the same login screen opens up, I enter my email and newly changed password and I get the same error. What am I doing wrong here?

I recently changed my laptop and I'd like to re-install Mathcad. Unfortunately I don't receive the link for the download and the same it's not in the spam.

Hello !Using Creo Parametric 9.0.3 here.When I am creating a hole, the default placement type is Linear.Is there a way to change this to something else, like Sketched ? I have looked for a config.pro option but found nothing so far. 

Using Prime 11The topic is Hertzian contact.  I was investigating the capacity of spherical contact on a flat plate using several different methods of calculating the stress stateI converted a Mathcad 15 worksheet to Prime 11.  It worked perfect in V15.  In Prime 11, one of the functions is broken.Attached are the PDF of Mathcad 15 output and the Prime 11 worksheet that it converted.I’m using a bunch of nested solve blocks as functions.  The functions that use the Find solve block seem OK.  But one function uses a Maximize solve block.  This isn’t working.This function worked in Mathcad 15. sigma_eq is another function.  It’s supposed to maximizing the value of sigma_eq by searching for the value z_guess that gives the maximum.  The other inputs to the z_peak_stress function are “constants” that the function sigma_eq also needs as an input.Conversion didn’t mention any errors about this.  It added a ‘helper’ (?) equation that’s not part of the iteration.  And the new format throws an e

Hello, I have random lines on my part and don't know how to hide them. These lines are the exact ones that show when saving an STL file. Does someone know how I can get rid of them?

In a smartassembly script, is there a way to tie an IF statement to some type of GOTO command?

Hi everyone,I'm working on a Creo Toolkit (Pro/Toolkit) application and need to create a blend feature programmatically.The version of Creo Parametric I am using is 6.0.I have created two sketches (Sketch1 and Sketch2) and need to generate a blend solid/surface based on these two sections. I have searched for relevant information online, but there are almost no usable examples or clear API documentation regarding the creation method of blend features in Toolkit secondary development. Thank you in advance for any insights or code examples.

Error in Licence Pocessing

When I create break lines for bolt heads and connecting holes, the cylindrical surface has no directional selection, so sometimes the break lines connect directly, while other times they connect with a bent line from the back, making it look messy. Has anyone encountered this problem, and how did you solve it?

用自由式制作造形，想在现有的基础上修改一下，又不想破坏现有造形，采用了复制，但发现复制出来的与原图误差比较大，请问有什么方法可以解决吗 

Hello,I am working on application in Web.Link. My goal is to build text to look like Creo is displaying it when note contains dimensions:Raw text:“This note: &d24”Creo display:“This note: Ø14 +0,05”Web.Link using GetTextLines(“DISPMODE_SYMBOLIC”)“This note: \u0001n\u000214”“\u0001n\u0002” => Ø“&d24” => 14 (dimension value)Regardless of mode I choose “Numeric” or “Symbolic” I can`t get “&d24”. If I have this I could ask for tolerance and build my text exactly like Creo is resolving it.I consider this as an issue with documentation that is clearly saying that when you use “Symbolic” mode text should not be resolved. (the same is for parameters in text)Link to documentation:https://support.ptc.com/help/creo_toolkit/pfcweblink_pma/r11.0/usascii/index.html#page/creo_toolkit/api/dita/t-pfcDetail-DetailTextDisplayOption.html#wwID0EI5XSBIs there a mistake in my approach? Is any one having a wokraound ?

I am looking for people who have personal experience with a company that has done this for them.I know about ICAM, PostHaste and Gpost(Internal)Any other options that are really good?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Just as an update - CREOSON has topped 11,500 downloads! 🚀 🎉Automation is becoming a key factor users and CAD systems in general.Special KUDOS to CREOPYSON project - it is amazing for automating Creo Parametric. (very popular)Also - if you have not seen these -- Connecting Claude to Creo Parametric via CREOSON they are worth the watch. from TechnoholicAI (youtube channel)I Connected Claude AI to PTC Creo Parametric (And It's Incredible!) Claude AI + Creo Parametric: The First Working MCP Integration (Step-by-Step TutorialHappy Automating!Dave