CAD

The plot is changing enormously when ode solve is used. Any suggestions? 

I have a top level BOM that list all my parts with a column that calls out what page each component/item is on. Multiple components are shown on various D size prints with a "part" BOM located below each item. The "part" BOM is automatically populated with &sheet_number. The top level BOM, however, is not tied to this &sheet_number and can not auto populate. I understand repeat regions would tie them together (&asm.mbr.sheet), but I'd have to manually type the number in. The problem with that, parts tend to switch pages etc..... I just want the sheet number to auto populate on both BOM's without ever needing to be manually entered.  Is this possible? I thought I had it working, but I was wrong.

I am using Creo Simulate Release 4.0 and DatecodeM080I am facing an issue with Creo Simulate. I need support for it.I am running a modal analysis, but every time I set the output to get “Mass participation factor” the run fails.The same run completes if Mass participation factor is unchecked.Here are the errors that I facedRun failed

I am using PTC Creo 8.0 and I need to do a model about a real object ( an old calculator), and I don't know how to start the sketch.If somebody could send, how the reference sketch looks like (for skeleton modelling) that would be a lot of help.The pictures show the calculator.    

I have enormous number of .xmcd files needed to be converted to .mcdx. Inside most of them there are links to each other. Considering nested structure of my files and the fact that you can not choose the whole folder for nested convertion in built-in MathCAD Prime Converter I need to automate at least filling Converter with list of files. Would be even better - to make the whole process fully automatic. Have someone done this before? Is there any API for the Converter? Nothing like that was found by me in the PTC support database 😞There is some kind of workaround - to generate multiple paths to files relative to the root folder and join them with " "`s but resulting string is far too long to be accepted by the FilePickupDialog of the Converter. Too many files needed to be converted.

Currently using, Prime 9.0.0.0. In ANY version, is there a way to have a simple database query like return "weight" from "AISC Shapes.xlsx" where "Name" = "C10x15.3"? Or workaround? Is it possible with the tables you can create in Mathcad? I can create the table if need be.Thank you in advance.  

Hi folks!I have one issue that I can't solve on my own, perhaps someone could help me with it. Since I have to use a different balloon text height from the main text height, I manually change it every time creating an assembly drawing. Is there a way to input an exclusive balloon text height in prodetail file? I couldn't find the necessary parameter there.Please note that I'm talking about the text size, not the min/max balloon radius. Thanks in advance!

Hey!I have licence problem after installation Creo 10.0 - student version. I start the program and I always recieve a messege: I have to renew my licence. I don't know why, because I used the right code from PTC's website.I've also got a 'txt' file per email (Creo licence), but I don't know exactly, in which order should I copy it after dowload. Thanks for the answers!        

When installing 14.0 I get a message saying this is an upgrade and to enter the old serial number. I had 7.0 and the s/n was PU02802D00549 which it does not accept. I still have the 7.0 CD, I put it in the DVD drive and provided the path but it can't read it. I had this same problem in 2017 and it was a ridiculous pain in the butt then, I shouldn't still be going through this aggravation. Fix it already sheesh.

I use the student version of PTC prime 9.0 on my office computer (windows). Primarily I remote in from my Macbook, but periodically I receive the issue:Cannot checkout an uncounted license within a Windows Terminal Services guest session. Is there a way to solve this issue remotely? As a student I don't have support phone service

When i want to register and have free mathcad trial there is written that can reached maximum number of licens. I have this program on my PC and i wanted the same program on my laptop. Why cant i have same program on other device?

hi,In eSupport it won't let me download the PTC CREO 10.0.2.0 files and an advertising window opens that I can't remove. Why?thanks

Hello all,maybe it has been ask many times, and for all I know, it seems not possible. But at least I will also ask for it:Is it possible to export a shaded 2d figure (e.g. in the attachment) to a shaded vector graphic? Or, to ask another question:Does anyone in the forum use Creo Illustrate to create illustrations and then finally convert them into vector graphics? And if so, which method or tools do you use? Thanks and best regardsRamon Bohne

hello everyone, could you explain this update of the offset and project commands In my humble opinion it seems to have gotten worse. Now I have to confirm the command and before I didn't need to  

I want to create the flexible PVC tubing for my assembly - routing is shown in the image.  I have created the tube using cartesian method from the staring coordinate system. i feel this is time consuming and losing time to fix the each location of the tube.  is there any faster and flexible way to do the flexible tubing something similar to creating the tube thru  datum points/coordinate system ? pls help. 

Good day,I am encountering a customer if we can run Creo Parametric 10.0 on MacOS via Parallels (similar with bootcamp emulator of MAC to make it windows OS) . We know that Creo has no version for MacOS but once Parallels was used will be there an issue or problem with it still? Let me know also if there is a article case of creo connected with Parallels. Thank you.     

Hello every one When starting autoGEM or Analysis and Design Studies, Creo crashes/forces close. I am using Creo version 8.0.5 & 9.0.3. When I use 8.0.5 it runs well no problem, but every time I use Creo 9 or 10 it's always crashes     Please help me   regards Dio    

I am a longtime mathcad user who purchased a permanent license for Mathcad prime 3.1 many years ago.I am in the midst of replacing my old win 10 computer, with a new one running win 11.  Before I begin the task of reinstalling mathcad 3.1 and getting the licensing software to work, I am wondering if version 3.1 will run under win 11.?As a retired person, I cannot justify the cost of getting the latest version of Mathcad, so if my version won’t work, I’ll just install the express version. thanks mike

As per the original post.    Hey!   I tried this to open a Prime 9 document in Prime 7 and didn't work. Do you have a solution for these two too?

I have attached a copy of my calculation in which I am getting an error for my i term. Shown below is the error I am getting when I try to run the calculation. I am using Mathcad Prime 7.       

So basically I'm recreating a calculation based on an example done in Mathcad 15 (I only have a PDF of that example). I've gone through all the math and finally got a plot working, but the results aren't coming out as expected. I'm afraid that something in Mathcad 15 works differently from how it does in Prime, but I don't know what it might be. Any thoughts would be appreciated.

Hello! I have a system of equations with units.  when I use lsolve, I get different answers (all incorrect) depending on the units used.  however, the solve block works correctly.  This is Prime 7.  sheet attached. Any ideas?  maybe a bug in lsolve?   correct result: 

What is the easiest way to combine assemblies in Creo?    

Buenas tardes, estoy intentando programar para calcular el acero requerido por el método de iteracion, tengo dudas con el operador while, por favor si alguien. el archivo esta en Mathcad Prime 8.0.0.0 me puede orientar. 

While opening Creo, an error occurred, and Creo automatically closed, please suggest a solution to resolve this issue.   Refer attached screen shot for your ref