CAD

I have tried several times to have the link emailed to me to download the free version of Mathcad but I am not receiving the email. I have checked the spam folders and there is no email.

Unfortunately, this was never fixed.  Now, the Activation Key server is down (URL). Is Creo Elements Direct Modeling Express still a usable product?  If so, what's the fix?

I am using Creo Parametric Release 11.0 and Datecode11.0.0.0 Modelcheck is not running properly. i have the files setup. (config_init.mc... and others). i have also enabled modelcheck in the config edit as well that the Modelcheck_dir. I have also enable show_reports. (see attached pic).  When I run Modelcheck interactive, it completes the process but does not display the modelcheck screen.   I

I am using Creo Parametric Release 5.0 and Datecode5.0.6.0工程图里面的表格和尺寸线线的颜色，能通过配置修改吗？电话15992617285 邓工

Do you have to produce design data (2D Drawing, MBD packages, etc.) that supports a mix of suppliers where some want ISO/DIN standard GD&T and others want ASME/ANSI standard GD&T?  This question came up from a team at our European division that is working between Creo Parametric and Windchill and NX and Teamcenter.I had always thought the standard was up to the company creating the content, with some understanding given to the typical standard for the majority of the suppliers being used.  Any suppliers for whom this isn't their norm would still have to follow the called out standard.We would be curious to hear if anyone is providing content that covers both standards as part of normal process, and how (overview) you do it.

I have creo 9.0.5. I'm trying to export a .dxf file so that i can import it into my plasma table software (torchmate V9). The problem is when I go to import it into torchmate, nothing shows up. A long time ago Creo support helped me change some export settings and we got it to work but I've forgotten since then. Any ideas?

Creo Parametric 4-12. Mold design/Casting application of shrink by scale for anisotropic shrink.   When applying a shrink by scale feature a reference csys is used to apply the shrink. Can anyone offer some insight into how/why the selection of this csys is important? What are the criteria that should be used to determine the "best" csys for use with anisotropic shrink applied to a design part (reference model). Can anyone offer best practices based on theory or practical experience? I am focused on injection molded polymers in this context if that matters. I would default to the use of a csys located by determining the centroid of the reference part being shrunk, but this is an educated guess.  

Good AfternoonI installed version 11 as a trial version but unfortunately the files I'm trying to open are an old version 14 Could you send me a link to a later version that would open these? I had trouble getting the link for version 11 in the email address.Much appreciated ThanksRick

I am using Creo Parametric Release 12.4 and Datecode12.4.2.0Hello,We are encountering a problem when creating the .bom file. The .bom file is created, but it is limited to 2-3 characters, whereas we need more characters in this .bom file. We would like to avoid having to modify it manually each time, but rather have it allow more basic characters. Is there a configuration that allows us to do this?Thank you in advance,Best regards,

Hi everyone,I have a plot in Mathcad and would like to export the underlying data to a .txt file.What is the recommended way to extract the data from a graph and save it as a text file?Thanks in advance for your help!

Hello! Is it possible to do the following:I have two matrices, say 5x1, but want to perform computation using 4 elements of both matrices. In other words I want to omit one row (value) form the computation. The result will be vectorized.  Best regards,Sergey

We have been seeing a new icon in the upper right corner of Creo 10.0.7.0 at different times.  Never seen it before.  Nothing in session this time.   

12.4.2.0, there is only an online version (or at least, in my experience) Does anyone know where I can find off-line version of pro/toolkit help? TIA

I want to make use of the 30 days trial. After installation the license wizard requires the product code. Where can I find that?

Hello!. Please, help with the following issue: I have defined two matrices and use them in equation where they are being multiplied. By some reason I get only one value instead of an array. If I define the one matrix ("k") as a variable, then the computation goes on, as it should, and I get an array. What I am doing wrong? 

I have a copy of Mathcad 14 (with the original disk and receipts).  My computer died and I had to move it to a new computer.  During the install, it goes to log into PTC to get the license (after entering the product code), but returns errors saying I don't have permission.  I've got the license file from the old computer, but since it is tied to that computer, it doesn't work on the new one.  I've gotten no response from PTC when asking for help. FWIW, it's on a brand new Win 11 computer.

It would be very useful if Mathcad supported a column-based or region-based document layout for engineering calculation sheets. In traditional calcpads or formal calculation reports, calculations are often arranged into clear vertical sections, for example: "Reference / Code clauses / Assumptions""Calculations""Results / Output"At the moment, Mathcad provides a single continuous canvas with free placement of text and math regions. While the grid helps with alignment, there is no way to define fixed columns, regions, or containers that keep content aligned consistently. A typical example:On one horizontal “row”:Left: a short text description (e.g. Bending stress)Middle: the actual formula and calculationRight: the applicable code referenceCurrently this requires manually placing and adjusting multiple text and math regions, which becomes difficult to maintain and easily breaks when edits are made. It would be beneficial to have something like this implemented as it&n

I recently has some symbols in drawings change. Some are missing. Then I noticed that the Dimension Text Symbol Pallet has changed. Did I accidently delete something or redirect something to make this change?           I checked this post and a couple of others without finding a solution:   https://community.ptc.com/t5/3D-Part-Assembly-Design/Symbols-missing-from-dimension-text-pallet/m-p/967490#M136117

It seems a little thing but the ability to complete sketch entitiies and return to the select tool, to complete features, to activate the OK button on most pop up windows, etc. all using the middle mouse button is a massive advantage in efficient workflow and productivity - use Solidworks for a bit and you notice the increased mouse travel.   Completing a sketch though is a significant ommision from the list - you still have to directly pick the pick the green tick.   If the middle mouse button also completed a sketch this would complete the set beautifully!

Hi, I created a file in Mathcad Prime 8.0 and I'm sharing with my client who is using Mathcad Prime 7.0. But he's unable to open due to compatibility.Can anyone help me out please on how to create a file that can be opened in Mathcad Prime 7.0 as well.  

I have been using Mathcad 14 for many years. After upgrading to a new PC, I tried to reinstall Mathcad 14, but the licensing process failed. The website returned the following message:The remote server returned an error: 403 Forbidden.Could you please assist me in resolving this issue?

Trying to transfer license from 1 system to another.. Webpage when trying to get license, etc said i don't have enough permissions / access denied. So i can't manage my own license i payed for.

i wanted to install Mathcad 15

I frequently disconnect and reconnect to our network when i bring my laptop into conference rooms for meetings. Creo often gets stuck with popups on top of popups (unsaved data warning, license lost, and Windchill server unavailable). I am forced to restart because I cannot select the "retry" option on the license lost dialog as its covered by another popup that can't be moved. Is there a way to get around this?

We are actively moving to SharePoint data storage. Can assembly be organized with Parts in multiple folders / Multiple access users working on different parts of an ASSEMBLY. Assembly Regenerate should update the assembly with latest in SharePoint folders.