CAD

In attached file I'm trying to plot a function of time but am getting a "Replace complex values and NaNs by real numbers".  If I include units in my "t" range definition I can plot my second function.  If I exclude units I can plot my first function.  But not both at same time.  I can't see what is wrong.   

Certain bends of a sheet metal part will take different angles depending on if it is pre or post installation. I want to model and draw both states.  I don't want a family table as this will create two part models when in reality there is only one part. I tried simplified reps. I modeled the pre-installed state, then an 'unbend' feature, then add new bend features to set the installed angles. I planned to use simp reps to enable/disable these features as required. However, I'm unable to add new bends in the same location as unbent ones. Any ideas how I could tackle this would be appreciated. 

Hi,  I would like to make a new subassembly in the end of my model tree of top assembly. And I want to copy some of the components from top assembly to that new subassembly (just to pick the components I need to run some analysis) and than exlude it from top assembly. The top assembly is really big almost 2000 components and my current steps look like this: - Hide the components I dont need- Choose part filter - Choose all the components I can see (components I need)- And right click and Copy - Paste into new subassembly  But the problem is that I cant copy all the components (or dont know the way how to do that), but only one and its really non effective way ?  Do you know how to do that more effective ?  Thanks  

I am using Creo Parametric Release 4.0 and DatecodeM010Recently, the software has often been stuck, and error alerts have appeared frequently.Here are the errors that I facedA fatal error was encountered. Wrote back to the lake to 😧 White-STtraceback.log please send it to Technical Support======================================Translated the below text from Chinese to English using PTC Translated tool. Translated on 9th March 2023 at 10:52am IST by vnamboodheri======================================Title:  软件报错Body: 软件最近经常卡死，频繁出现报错提醒。遇到严重错误。已将回湖写入D: White-STtraceback.log请将其发送给“技术支持”

I want to reverse the text left and right  How do I do that ???     

HiI get an error in the root function when a variable exceeds a specific number. See attached file.  Thanks in advance      

How should I start this I keep getting a square edge.             

For x,y kind of dataset, it is required to perform numerical integration w.r.t. x'.The italiczied P represents Cauchy's Principal Value. Limits are from 0 to infinity.It was first tried to approximate the x,y data by combination of mathematical functions but didnot succeed as the data can not be modeled so easily and exactly.Apologies for not putting very clear image. I do not find any clue how to proceed on it. Thanks. 

In a part, the scroll wheel zooms in/out using the mouse pointer location as the centerpoint.  For assemblies, it ignores the pointer location and just zooms in to the center of the assembly, so then I have to pan over to what I want to focus on.  Is there a setting for this?  Thanks!   

I am analyzing a ground motion applied to a SDOF structure and finding the motion with Newmark's method. To accomplish this I have read the ground motion in with the readexcel function and then use a for loop to find the relative displacement, acceleration and velocity for each time step. The file used and the needed excel file are attached.     

Does anybody knows what are the steps and which files generally Creo Element Drafting follow to start?Mainly I'm trying to have at the startup of the application the old original Black background in the Me10 style. Thanks!Marco  

Hello all, I recently got an error message when I opened Mathcad file, attached below. Error message saysAre there any means to resolve it? Thank you so muchKind regards   

Using the spiral tool and the threat geometry from the standard. In addition to that start and end of the thread are always not realistic.    

Hello, I'm currently working on Excel macro that connects to current session (drawing) and extracts data.I managed to get it so far that it extracts dimensions (names and value) but i just can't get a correct procedure to get the dimensions upper and lower tolerance. The only thing i was able to obtain is tolerance type with ipfcdimension2D.GetTolerance(). Is there a method to get upper and lower tolerance somehow? Greatly appreciate the answer!Klemen    

Is there a way to get the plus minus sign ± into math field? I couldn't find it from the symbols list so I guess the only way of getting it into the document is to copy+paste. However, Mathcad doesn't allow me to paste it into math-field, only to text fields...

I am using Creo Parametric Release 7.0 and Datecode7.0.2.0I am working on MBD models. I have predefined combination states in Start templates. We kept those states off from view manager. I have 1_Map combination state where it contains hyperlinks of other combination states to navigate through others. If I want to navigate through other states from 1_Map when other states are still off, then Creo is getting freeze. Please help to resolve this.

Hello. I am trying to make a drawing table for weld information that has all of the weld information for the entire assembly including sub-assemblies. When I create the table in the main assembly the table is only populating the information from that main assembly and not the sub-assemblies. Any help on how I can accomplish this would be appreciated. Attached is a pic of what I got. Notice the annotations are there for all of the welds but the table only has the 10 welds from the main assembly. there is also duplicate IDs due to the sub-assembly welds. ThanksJoe  

Hi, Is there a way to control the number decimal places of Creo default bend note angle and bend radius through config or detail files instead changing them manually one by one? please assist. Refer attached image for the targeted bend note (our current standard). Bend Radius with 3 decimal and angle with Zero decimals.  

When installing Mathcad Prime, in the third window the application selection menu is empty. I've run the .exe file as administrator and the problem persists. Any help would be appreciated. 

Hi,We have an old LMTools running providing an license for MathCad 11.I would like to transfer the license to a new supported server, but I'm stuck with the license file itself.I did manage to start the license server, but I'm receiving an error: (mathsoft) Invalid license key (inconsistent authentication code)I cannot find any contract, customer nr or anything, so I cannot create a case with PTC.Can anyone help to transfer the license to a new server?Thank you     

There is no way to check node ids for meshes that are not in FEM mode. When I output the results of modal analysis in ASCII, the node IDs and mode vectors in the XYZ directions are output, but there is no way to confirm where these node IDs point in the model. (Mechanica had a way to check) Isn't it strange that CreoSimulate can't do what Mechanica does? What is the meaning of output files of modal analysis results such as ~.d01 and ~d.02? ---------------------------- FEMモードではないメッシュの節点IDを確認する方法がありません。 固有値解析の結果をASCIIで出力すると節点IDとXYZ方向のモードベクトルが出力されていますが、これらの節点IDがモデルのどこ指すのか確認する方法がありません。（Mechanicaでは確認する方法がありました） MechanicaではできたことがCreoSimulateではできないというのはおかしくないですか？ ~.d01、~d.02などの固有値解析の結果の出力ファイルには何の意味がありますか？  

Is there an option to make default input type text and not math? I'm doing a machine design course and we have to use Mathcad to calculate the exercises. Majority of the document will therefore be text so it would be more convenient if it was the default option. Meaning that if I just start writing, it'd write text and not math. Math-field could then be activated using [ctrl] [m]

I saw some older posts, but nothing recent. Is there a way to convert .c3di or .pvz files to a more neutral format such as the FBX filetype?  Has PTC recognized this gap and is it on their roadmap? 

Good afternoon. Hoping for some help to resolve this. When I am using the model weld annotations in the drawing, they have the leader line right through the center of the text as well as overlapping text. The annotation looks fine on the model. I assume this is a drawing property setting but I have been through them all and can't figure it out. Picture attached. Appreciate any help. Joe   

So, I'm working on a drawing in Creo 6.0, and I've hidden all of the datum tags that were not attached to a GDT in a layer. However, they still appear when I open the latest published version of the drawing in Creo View. How can I get these datum tags that are hidden in a layer to not appear in Creo View as well?