Creo+ and Creo Parametric

I am using Creo Parametric Release 11.0 and Datecode11.0.5.0组装图里插入零件后没有拖动箭头？第一次进去没有拖动箭头，二次进去才有重启后第一次就有拖动箭头，然后不知道因为啥，用着用着第一次就没了，然后就得像上面说的，二次进去才有姓名：邓工邮箱：442787729@qq.com

I'm trying to get the piping weld numbers that can be created in the piping module, and that can be seen as annotations in Creo to also be exported to the pvz file format. That way I can see them in Creo Viewer. I've ensured that the annotations can be seen in the Viewer and have also added normal annotation Notes so as to verify that annotations are exported. They are and can be seen, but not those related to the weld. Any ideas on why and suggested way of fixing this? Thanks,Erik

Hi, can you give me suppliers details who can create GPOST for Lathe, Mill, HMC & 5Axis machine.machine having Fanuc & Mitsubishi controller. we are about to start using CREO NC at our manufacturing shop in India for this we required this.

I am using Creo Parametric Release 10.0 and Datecode10.0.5.0We have an assembly where certain sub-components might be shown or hidden (suppressed) by ProProgram, based on parameters, for different design cases. Based on that assembly we have created a simplified representation which shows only a subset of the resumed components from the original design (driven by rules). From that simplified representation we need to merge all the visible geometry into one single part and for doing that we have created a shrinkwrap and enable the option to automatically update its geometry based on the original design. While the simplified representation works properly for different design cases, the shrinkwrap does not update its geometry automatically upon regeneration. The only case when it does is when the design takes the "state" in which the shrinkwrap was created, but other cases don't. We have tried searching for some options in the config.pro that might enable such automated update, but couldn

Hi community, Our questions Creo MBD modules and create to links. I can add links. But how can I ensure that when I click the link, the CAD document opens in a new window? 

Is there any way to copy text from one table A to another table B. What ever I input in Table A should populate exactly in Table B. (This is to avoid redundancy & mistakes)SEE Image attached 

Reference topic: https://community.ptc.com/t5/Analysis/Flow-Analysis-Post-Processing/m-p/871276#M11296    Hello @MB_10584523 ! Thanks for this post ... I have the same question or the same request. It would be great if PTC would enable calculation of average and mass averaged report for velocity (so, similar as for total pressure). This option should be available either through XYPlot either/and through interface output property.   @tmoser : good advice until implementation of my proposal into Creo. 😀   Have a good day  

Hello, I would like ot know if there is any posibility to measure COM of subassemblies. According to direct method there si no way to propagatemeasure to higher level assembly.  Most of our frames has simple design with 1 rotation axis and one hydraulic cylinder and we need to confirm if analytical solution is confirmed by FEM model. So key parameter is COM of subassembly. In top level assembly there is a way how to measure COM of whole assembly but it is not enough to calculate reactions in joints.

Hello. I am simulating one beam model which rotates around an axis.・A clock spring is set on the rotation axis.・In MDO, beam model start to rotates upward once it start running I would like to explore Minimum Spring Constant K (Nmm/deg)  that allows the beam model to rotate more than 40 degrees.(no need to change Beam model dimension) In this case, is it possible to obtain a solution for the spring constant K with BMX?Or any other solution in Creo? I try setting Spring constant K as BMX Goal by using relation. But it was not explored This problem will be solved by hand calculations. However If a solution exists for this simple problem, I will apply the method to more complex problems . (to simulate Car Seat Tumble Motion) Any advice would be greatly appreciated.

Help to see what I am missing. I want to find the first component in the assembly and delete it.I can find the first component, but having trouble deleting.Here is my run methodpublic void run() throws jxthrowable, IOException { Session session = pfcSession.GetCurrentSession(); Model model = session.GetActiveModel(); if (model == null) { return; } if (model.GetType() == ModelType.MDL_ASSEMBLY) { Assembly assembly = (Assembly) model; Features components = assembly.ListFeaturesByType(false, FeatureType.FEATTYPE_COMPONENT); if (components.getarraysize() > 0) { try { // --- Find the first component in the model tree ComponentFeat targetComponent = null; // Get all features in order. Features allFeatures = assembly.ListFeaturesByType(false, null); // Find the first component feature in the feature tree for (int i = 0; i < allFeatures.getarraysize(); i++) { Feature feat = allFeatures.get(i); if (feat instanceof ComponentFeat) { targetComponent = (Component

I am using Creo Parametric Release 9.0 and Datecode9.0.8.0When I am transition my old IDF board to an IDX file, it is giving me an error with my ECAD areas. When I try to edit the sketch of my ECAD area and hit "OK", it gives me the error "Cannot have more than one outer loop". I have several circular areas within my sketch that all should be route keep outs.Is it telling me that I have to make individual features for each of my many zones?That would be a very inconvenient way to model several of the same type of zone. Each zone is slightly different and can't be created using patterns. Is there a workaround to this?Here are the errors that I faced"Cannot have more than one outer loop"

How to keep the symbols also consistent with other Pen_width? SEE IMAGE Please. Thanks in advance with your solution. It looks so odd on a print.    There always something crazy challenge in Creo!

hi,i'm using Creo parametric 12.4.2.0 and it seems that with My Filter enabled for selection it doesn't switch automatically to Cabling Items when using Cabling module.is there something to change about that?thanks

I also have this issue. Reference topic: Parameter PTC_COMPONENT_SETS has invalid set na... - PTC Community   When I use the "insert here" trick to see when the message appears by dragging this "insert here" lower in the feature tree I managed to find out which model is giving this error. I've tried a lot but also completely remove the model and constraining it again the error appears again. This model is an assembly and within the assembly the PTC_COMPONENT_SETS message isn't shown.   @dcokin wrote: The trick is that to find and control these values, you need to look at component level parameters.  From the parameter dialog, change the "look in" menu to "Component", click the arrow, and then click the desired component from your model tree.  It'll have a string parameter called "PTC_CONSTRAINT_SET", which lists the active sets separated by commas.  (In rare cases, you may need more than one active at a time.)  Inconvenient thing about

The customer plans to upgrade to Creo 10.0 in the future; however, all drawing work is currently being performed based on Creo 3.0.Accordingly, I am modifying drawing formats (.frm, .drw) in a Creo Parametric 3.0 (M190) environment.In the drawing tables, parameter values are linked to table cells. When the parameter values become long in the drawing, automatic text wrapping (Wrap Text) is applied to improve readability.However, when Wrap Text is enabled, the full parameter value is not preserved. Only the last line after wrapping is displayed, and the parameter is not recognized correctly.According to PTC article CS230831, this issue was resolved in Creo Parametric 2.0 M220.I would like to ask whether there is any configuration change or workaround available to resolve this issue in the Creo Parametric 3.0 environment.

Thanks for any hints for solving this efficiency issue.

Explore how Gunboat combines racing speed, luxury craftsmanship, and sustainable innovation to create catamarans that set new standards for performance and responsibility.    

Hi folks, I've built a pretty simple front panel and I'm trying to make a drawing out of it. When I placed the Front and Right view I noticed that it's showing me all the hidden lines, even though my Display mode is Shaded with Edges (I've triple checked this and I have also tried to change it to No Hidden, no luck). View Display for each view are set to Follow Environment and all Layer elements are hidden. I've even tried to manually hide them via Edge Display and that doesn't work either (doesn't hide anything, but Show Modified Edges does highlight my targeted lines). Lastly Force_wireframe_in_drawings is set to off,  I've looked around for previous topics and found no resolution, so here we are.I've attached an image of the drawing (front view and right view as Section) and the 3D model from the front and back view so you can see where the issue is appearing: the rear-of-panel-cut out is showing up in the front view and the side view is showing every c

Hello PTC CommunityI am using Creo Parametric Release 10.0 and Datecode10.0.8.0I need to get the simplified representation used as substitution of an item of a dedicated simplified representation of an assembly. So I'm using ProSimprepdataitemsVisit to get the items and filtering them on the action type. it works well with a new created simplified representation.After replacing the a component having a substitution by a component having also same replied representation name, it is not possible to get it : the previous component is still return as ProSimprepitem ( its item_path still have the previous CID).How to update the simplified representation item?

I am getting an error for license file does not support the version for Creo 12. I have reconfigure the installation still it is not working.

I like the new (well, it's been a few years now) tools for Project and Offset. They're harder to teach, but they're more robust. But today I tried to use a seldom used command: Convert to Tapered. It used to be you can select an Offset geometry in the Sketcher and hit Operations->Convert to->Tapered, and then have the offset vary from one end to the other. Nice little trick. Well, it seems it doesn't work anymore? I tried getting it to work, but it's always greyed out. I searched through the documentation, and found this little note:  When you use the new tools for offsetting or projecting an edge the following functionality is not supported.• Projecting an axis.• Projecting or offsetting in the Blend tool.• Creating a Pattern of the type Curve.• Converting the new offset geometry to Tapered. Hm, I guess we got some new limitations with the new tools. But the fact that the option is still there (but greyed out) and the fact that the documentation says whe

I am using Creo Parametric Release 10.0 and Datecode10.0.7.0just migrated from windows 10 to windows 11. We manage all mapkeys in config.proworked fine with creo 10 + windows 10most mapkeys are two letters. For exemple "RR" for right view. etc.All mapkeys do not work properly since windows 11 migration. First letter is recorded by creo 2nd letters is lost, we have to hit second letter again to make shortcut work Hence needs 3 hits for one mapkey...Most of our daily tasks are performed with mapkeys.We are over 20users trained with these mapkeys. We cannot change them. Please let us know what issue is and how to fix it

when i call ProEngineerStart，tips:Cannot register service with portmapper: RPC: Unable to send; errno = 10057

I am using Creo Parametric Release 9.0 and Datecode9.0.11.0When I import a tiff image in my DRW the created dimensions, notes, and symbols appear above the image, while sketch entities appear below, so I have to increase the image's transparency to manage them.I there a command for put under the image?

Hi! I use merged balloon symbols for multiple component. If this merged balloon symbol is moved the leader always move to the middle and works inconsistently.:(view in My Videos)Is there a config key settings to disable this behavior? I think it is a new thing, never happened in previous version of creo (creo8).I'm using: Creo parametric ver. 10.0.4.0 Thanks in advance!