Solved

Dear All,Currently i am struggling to get the qty value in my Bill of material table correct. due to the use of nested repeat regions.   When a sub assembly is used multiple times i can not get the qty of the parts used in that assembly to represent the total amount of used parts.(see pictureI have tried to resolve the issue by using relations. but i can not refer to a value from one repeat region to an other. Douse anyone recognize the issue at hand and have ideas on how to resolve it? I am working with Creo 7.0.11.0. Tomas

Hi,I found this file Mathcad - expm.xmcd where it calculates: It seems that the calculation of exponential with exponent a matrix it is more rapidly done in this way than using e^([matrix]) in Mathcad Prime.I put this in a Mathcad file (see MCP9 attached file), but I am not sure if I did things correctly (like I do not see a influence of that if 0<n) and I do not fully understand the procedure/calculation (I see that there is 2 methods. What are the difference between them? What is better to use?)Can someone check and explain the procedure/calculation if understand it?  

I am using Creo Parametric Release 7.0 and Datecode7.0.8.0Since today, in the sketch module of 3D part, when I want to edit a value, the window to edit opens and closes immediately.I tried to restart my station, create a new part and change the CREO version but this problem persists.

hi - I'm trying to limit the maximum and minimum value in a vector to with a clamping function.In my file the vector is to be limited to a minimum of zero and maximum of 5. Can anybody help me find out what I am doing wrong?Newbie alert - be kind please 🙂thanks, Ian

Hi there, one of my users is opening any assembly or part is having locked symbol in the model tree. and this is happening each time he opens any CAD. is there any problem in his installation?see attachment.creo version- 7.0.2.0 br,sandy  

Hi, my drawing is showing wrong tolerances please see attachment.the points are not showing even i have entered decimal value.please help. Br,Sandy

Hi All, Is there any tool for windchill cad version upgrade tool available at Windchill ,for example windchill cad file version solidwork 2020 version to solidwork 2024 need to upgrade , it possible to upgrade entire windchill solidwork files i assume there is no tool at windchill  Thanks Sarathkumar M

Is there a way to change settings/configuration in Kepware which can allow us to remove duplicate data coming from devices? Its being fed into ADX and there we are getting lot of duplicate rows with same timestamp, telemetry value etc.

Hi,I try to have a Report with latest version of WTpart related to a list of Resouce ( Workcenter,Tooling..).There is someone able to help me please?Best regardsGianpaolo 

helloi  would like to add object history into selection/constraint ?Ex : Change HistoryRegards

Hi, while reassigning a task, my windchill page gets unresponsive. i tried clearing cache of the browser.tried using another browser but same proble. windchill version - 12.0.2.0 Br,Sandy

Is it possible to use external javascript libraries in thingworx. I would like to make use of the influxdb2 client specifically so that I do not have to re-invent the wheel on services and queries to our local influx data base.   

I worte the same program for seven function and it works in all of them ,but doesn't work in the last one. I have no clue why?Do you see the problem? There is no difference , HOWEVER the error shows only in last one. 

Hi Guys, Here we can use the Report - Multi-Level BOM to view the level right, can we convert/saved into excel file. It's possible. Regards,AJ 

Hi Everyone, I am looking for how to upload the data from local to the WT Part tab - reference document and described by document. I found for document Article - CS38296, but I can't find for WT Part.Regards,AJ

Does the timestamp for a value change when the quality changes? This can be when the quality goes from Good to Bad as well as when it goes from Bad back to Good

Hi Guys, Please help me with below questions,1. Is Separate License required to install and use Windchill Workgroup Manager?2. Is Integrated CAD environment (Windchill + Catia V5 integration enabled by WGM) needed to bulk migrate/load Catia data+ files into Windchill? for both scenarios i.e., With WBM and with custom loader. Thanks in advance. 

We are in the middle of testing WC 12 and Creo 8.  The image shows a structure I'm testing.  This is a typical formed sheet metal part (SM_RH), a flat state of this part (SM_RH-600) and then the raw material for the flat state (MATL_1234).  SM_RH would be in our Design context.   The -600 and the raw material need to be in the Manufacturing context. I work in Mfg Engineering and work in our Manufacturing context where I have read/write.  I have only read rights in the Design context. What is the best way for me to freely add the -600 and then the raw material the -600 item when I don't have rights to check out the SM_RH item?  My goal is to create an MBOM so the entire structure can be passed to another system.

Hi, I have an Extrude Feature where the Value "Depth" is driven by a parameter (here: Test). This works, anything ok.  But how is it possible to remove this Parameter there? - Right mouse button "Delete" is greyed out" and the Paramter itself is also not deletable in the Parameter Manger. I just want to enter a value again in "Depth" not this parameter.  

Hello @Werner_E and crew,I've recently returned from a hiatus from the forum due to a busy schedule.I'm back with a new project and seek your guidance.I'm presenting the following scenario: I'm dealing with three rectangles or zones: A, B, and C. Each zone has a priority level. I have a list of points that I need to plot and require the program to determine the zone in which each falls. Should a point land on the boundary shared by two or three rectangles, the program should assign it to the zone with the highest priority. I've been working with Mathcad Prime 9 and have devised a solution, but I feel it's lacking because I haven't effectively incorporated the priority level. Could you recommend a more refined approach? Below are snapshots for easier reference. In the real world scenario, there will be many more zones and huge list of points.  

I am trying to update a drawing (Creo 9.0.4.0) and I cannot get @O to work. Did they remove this from the program?   Trying to reattach.    

Hi all, I configured windchill odata connector some apis are automatically showing up, but for some i tried configuring with CS284781 article, how ever it is showing error while executing getEndpointList : Error executing service. Message ::Unable To Convert From org.mozilla.javascript.UniqueTag to JSON - See Script Error Log for more details. Thanks!

Hi!I don´t know why, but in my popup mashup I have two dropdown widgets and when I click in one the information is showed on top of the dropdown box. I want the information under the box.How can I fix it?  *my Thingworx version is 9.3.9 

I am using Creo Parametric Release 7.0 and Datecode7.0.10.0In sketcher we Can't edit the dimension. For example after selecting the dimension it is automatically un-selecting itself. The same issue is happening at 3 of our PC's. Requesting to make a swift action to resolve the issue asap.

I am studding pipe design from a "sample_project",There is a configuration file named "piping_mcat_dir.csv", point the location of the fitting 3D model folder.These locations are in local,I want change These locations to Windchill server folders.Do you know how to modify it?