Solved

Hello All,   This is not a question just somethinh I want to share maybe someone will need it in the future .    OOTB we have the  endItem attribute however its doesn't really mean that that part is a BOM header (Not used in other BOMs) and was looking for a way to find these BOM Header Parts .   I could achieve this in a two step manupulation .   First I have defined  a string  alias attribute called whereused to find the parents of a given parts with below mapping :  masterReference@wt.part.WTPartMaster~uses@wt.part.WTPartUsageLink~usedBy^wt.part.WTPart~number    Then a second step we can define a boolean calculated attribute  isBomHeader with formula : isNull(whereused)        We can now run a report find the BomHeaders :      Happy new Year :              

Hi All,Recently I have worked on creating the part substitutes and alternates using windchill load from file utility in windchill 12.0.2.18. Since the REST end points were not present in my windchill version need to go with load from file utility. I hope it will be useful for some one looking for a solution to automate these tasks.Following is the xml template for the same: Load Alternates:<?xml version="1.0" ?><!DOCTYPE NmLoader SYSTEM "standard12_0.dtd"><NmLoader><csvBeginCreateUpdateAlternateLink handler="wt.replacement.LoadReplacement.beginCreateUpdateAlternateLink" ><csvalternatePartNumber>AI-00003</csvalternatePartNumber><csvalternatePartName>component2</csvalternatePartName><csvalternatePartOrganizationName>DemoOrg</csvalternatePartOrganizationName><csvalternatePartOrganizationID></csvalternatePartOrganizationID><csvalternateForPartNumber>AI-00002</csvalternateForPartNumber><csvalternateF

Hi,I can plot Magnitude and phase separately , but not in the same chart as primary and secondary axisPlease helpJacob

Not sure if this has been updated in the newer versions of MathCad, but is there any way to preserve internal hyperlinks when printing to PDF while also maintaining the formatting? I have a 70+ page report that has a lot of specific formatting that I worked hard on and would like to keep. When I save as a PDF directly, none of the links work but the formatting is perfect. When I safe as a Rich Text Document, the internal links work but the formatting is gone. Is there a way to keep both the formatting and the links? Currently using MathCad Prime 9.0.0.0

Hi,I just want a simple range in matchad but it seems really difficult All I want is a range from 5 to 45 in 0.1 steps. The typical definition doesn't work. Is there an easy way to do this? I tried the typical 5, 0.1 .. 45 but i get an error even though the mathcad support docs show that this should be allowed....

There seems to be an error regarding logical statements in Prime 10.0.1. See below.The expected output of all statements is 1. It seems to only be a problem when using units. Is there a fix to this? Thanks

Dear all, I’m experimenting since a while, with MathCAD Prime 9.0 and a specific spreadsheet, what I’d classify as “numerical instabilities”.I’ll explain better. I’m dealing with a complex spreadsheet; this last:Reads from an Excel file the input dataRecalls (include command) a spreadsheet defining a function of 6 variables  To be noticed that the above points have not created any trouble in previous spreadsheets      3. Involves recursive formulas with matrix multiplications and inversion     4. Involves the solution of a transcendental equation deriving from the determinant of a matrix; this last             matrix is obtained at the end of the recursive process (hinted before    5. Is calculated using the options: Calculation/Calculation Options/ Multithreading;TOL & CTOL @ 10-7The spreadsheet, in itself, is not that big (around 350 Kb). Many different issues are highlighted.First, wit

Dear all, I've seen that for the users of Prime 9 with a valid license, the Prime 11 upgrade is available. I'd like instead to have both versions (to be used not at the same time obviously!). Is it possible? If yes with what procedure? Thanks Best Regards 

Hi,I'd like to create a mapkey macro to modify existing view label.When I create for example a detailed view, the label looks like this:.. and I'd like modify to this (line wrap, plus remove parenthes)Without mapkey macro I can do it manually.I recorded a mapkey for this, but it doesn't do anything.mapkey vn1 @MAPKEY_LABELView Note Correct 1x;\ mapkey(continued) ~ Move `main_dlg_cur` `NoteEdit` 2 35 35;\ mapkey(continued) ~ Move `main_dlg_cur` `NoteEdit` 2 21 21;\ mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9 452 250 196608 1024 1519 918 1920 1200 \ mapkey(continued) 29733267 `Del`;\ mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9 452 250 262144 1024 1519 918 1920 1200 \ mapkey(continued) 29733267 `Left Arrow`;\ mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9 452 250 262144 1024 1519 918 1920 1200 \ mapkey(continued) 29733267 `Left Arrow`;\ mapkey(continued) ~ Key `main_dlg_cur` `proe_win` 9 452 250 262144 1024 1519 918 1920 1200 \ mapkey(continued) 29733267 `Left Arrow`;

It doesnt want to activate it for the free 30 day trial.

Hi,My company uses Creo AAX to make assembly guides which I have self-taught myself how to do them. I am using Creo 10.0.6.0 and wanting to know if there is a setting that allows me to see the instructions in the bottom left of the model area, it only shows the step number, exploded state and simple rep. I would like to see the description whilst building the guide to quickly see if it makes sense, sure I can edit the step then edit the description to see the description but that can build up as our guides vary in length 8 steps all the way to 28 steps.I want to show this without editing the descriptionso that it appears in this viewIs this possible?

When I try to instal Creo 10.0.0.0 parametric with the student licence, i followed the file install_creo10_unistudent_standard.pdf to run it and to setup. I've downloaded every part of creo (parametric, simulate toolkit and so on...) and when it is done, it freezes, i can open it.The licence is in the text's file, and the source for reach it during the setup is according to it.I have shown it to a man who setup it often and he do not know neither.Can you help me pls ?

Hi,How is ThingWorx beneficial for creating ERP applications, enterprise solutions, and non-IoT web development?Can ThingWorx be used for building non-IoT web application use cases?

Previous functionality had a "Reset Component Position" (I don't remember the exact menus) which allowed you to reset the explode position of one component. It put the component back to the unexploded position without changing its explode state. I just assembled a small component into a Creo 9 assembly, which, in the exploded view is off into space somewhere. Of course, that destroys drawing views, detail views, etc.. I have run into this many times in the past. PTC tech support is useless on the subject. Often I just have to create a new explode state to make it work right - without a bunch of useless moves which mess up explode lines and require a ton of work on the drawings. This all seems so ridiculous. Where did it go? Does anyone know where PTC has buried this very useful functionality? The UI fails the intuitive test, for both me and PTC tech support. PTC support documents are useless as usual. This document says "Reset" but I don't see the menu.  The on

Hello, i'm currently using ThingWorx 9.3.9-b1648 and I need to change the input focus from a textfield on a main Mashup to a textfield on a contained Mashup. I've tried searching for solutions but most relied on the AutoFocus and focusOnLoad attributes of the widget but they don't seem to be present in my version. is there a way to change the focus of my textfields without those attributes? Thanks in advance!

We have installed the Databricks jar file in Tomcat lib folder and restarted the tomcat, after that we created a new SQL thing with Database template and try to establish the connection by using the connection string URL and other details (Driver class name, validation string as Select 1, username and password) but still we are not able to establish the connection between Databricks and Thing Worx. Can anyone help me out this.

I am using Creo Parametric Release 10.0 and Datecode10.0.4.0How can the standard ISO weld symbol be used to show a staggered intermitant linear weld. When you add the values for num_of_welds, seg_length_linear and pitch_dist_liner the numbers cross over the staggered Z part of the symbol. There seems no way to move the Z or space the values using spaces to staddle the Z. The symbol is a standalone annotation in the drawing and not used with the weld fuction.

I am using Creo Parametric Release 7.0 and Datecode7.0.2.0I created skeleton with multiple solid bodies and then created part from the bodies to build an assembly from these parts. In Creo everything is fine but problem occurs when I try to export an assembly to a STEP file. STEP file is generated but does not contain any geometry when imported. This is relevant only for assembly or parts created from skeleton bodies. Skeleton as a part is exported but does not contain all the futures because some futures are created in the parts. The first feature in parts crated from skeleton bodies is Extern Copy Geom with automatic update. I have tries use different export protocols but results is the same. Bodies is not set as construction bodies.Here are the errors that I facedWarning message upon opening STEP file: "Could not construct feature geometry"

As the title says one of my files got corrupted and i don't know how to recover it i've tried converting it into zip and recover it with some tools found online but nothing works This file is important as it contains the contents of a important project that i have to turn in in a couple of daysThe problem started today as my Mathcad wasn't starting and then i saw a thread about deleting user config i did and it worked Mathcad was starting and most of the files are available but this one isn'tPlease help me I'm quite desperate even tough its not much i already continued with the results from the equations in this and I'm not sure i can replicate them

My client are using Creo 9 with EMX 9.0 which has some configurations added on config file.Now Creo is upgraded to Creo 10.0 and EMX 10.0 is also installed.But when opened Creo 10.0 it shows error message of config settings file. Need help what changes to be made for using EMX 10.0 with Creo 10.0 Rahul Sardar

Hello All,Please see the attached document (Mathcad9). Currently, I am defining these variables individually in a table format.  I'd like to start defining the data for each member and its associated information ( Length, force, moment..) shown  then pull the information from the table to define each variable as i am currently doing. I am running analysis for each panel TC# and its associated information and report the results in an array format which i am not showing here. Thanks,Sam

Version: Windchill 12.0 Use Case: Register the CAD that has regeneration errors in Windchill.Description: Hello. Engineers are experiencing several issues when checking in CAD files with regeneration errors into Windchill. We are facing issues with Creo View in Windchill where it is throwing errors or the Iteration of WT PART is not increasing, etc. Is there a way to prevent CAD files with these regeneration errors from being checked into Windchill? Thank you

How can i remove whole tab with networkdue too high error risk of clicking on network and than waiting for it to unfreeze for 4 minutes we need to completely remove whole tab so nobody ever click this

Version: Windchill 13.0 Use Case: Our IT organization forcing the entire organization to use only Microsoft Edge browser and removing all other browsers from the Organization.Description: Is it a best idea to use only one browser in the organization? What your organization's policy. Any challenges by this in using Windchill, Thingworx, Creo etc..

Using CREO 9 here. I have been noticing in some instances the way I build my parts can leave me with sever small/thin "sliver" surfaces. Are there any settings or parameter selections I can use to avoid creating these little slivers?