Windchill
Recently active
We have an older WC 11.2 system that was shuttered, but now we want to move it to a new domain in the unlikely event that we have to retrieve any unmigrated data from it.The rehost using the Rehost Utility seems to have worked and updated the configurations, but during startup we get errors about Principal Repair Failure, repair of users being unsuccessful, a related disconnected participant, and then failures due to a rollback. Ultimately the MS shuts down and then retries again with the same errors.I found some support articles related to the repository table in the database but it isn’t clear what it “should” look like after the rehost.Article - CS51791 - After rehost MethodServer fails to start with error Cannot process participant xxx because a related disconnected participant wt.org.WTGroup:<ida2a2> exists in the database in Windchill PDMLinkArticle - CS109367 - Error updating repository table for JNDI Adapter: ORA-00001: unique constraint (PDMLINK.REPOSITORY$UNIQUE50) viol
Has anyone managed to download the VM machine Windchill_13.1.3.0_Rev01 from the site esdcne-ftp01p.ptc.com using filezilla?ThanksDimitri
When revising a part in Windchill, currently in the collector section of preferences, there’s only the option to collect all documents or no documents.Requesting the option to distinguish between “Described By Documents” and “Reference Documents”.This fixes the issue of a “Reference Document” having so many parts associated with it that the revise function essentially doesn’t work because it’s trying to load too many objects.
Following on from a number of articles a few years ago (CS258281, WGM Solidworks: Mass Properties not mapped to Windchill | Community, etc) and the PTC docs for mapping Solidworks mass properties to Windchill global attributes (CS258281) I have created all the mass properties as global attributes as real numbers with units.The example I will show is the mass, which has the standard QOM of Mass. Not sure where I am going wrong - I have tried to ensure names are identical everywhere. Error: “Mass” property in Solidworks Custom Properties tab:Global Reusable Attribute: Attributes table from EPM CAD document Type Management
I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.2 结构管理器中,BOM的位号属性,默认通过“-”进行缩略简写,能否取消此设定,默认完整展示所有位号数字
Hi all,We are running Windchill+ (SaaS) and have a CPS scheduled shortly. This will be one of our first updates, and we are trying to define a reasonable verification scope on our side. We asked PTC about this. The guidance we received was essentially:- There is no standard published checklist, and no customer examples were available to share.- For Windchill+, system-level validation is performed by PTC; verification of customer-specific business processes is the customer's responsibility.- A full UAT is not expected. The recommendation is a smoke test of representative day-to-day operations, for example: login, search, access to existing documents, document create/update/check-in, visualization (CAD viewables), file download, BOM/product structure navigation, and workflow approvals where used. That makes sense as a principle, but we would like to hear how this plays out in practice. Specifically:1. How deeply do you check each item?Taking the list above as the baseline, how granular i
I am using Windchill Navigate (formerly ThingWorx Navigate) Release 9.2 and Datecode with CPS F000 We are using Navigate version 9.2.0 and the ThingView widget in ThingWorx to display 3D models. Our query is whether Creo models/files with the Creo file extension can be viewed in Navigate and ThingWorx using the ThingView widget.
I have extensive experience with Thingworx and have recently started working with Windchill. I'd like to create a Windows 11 virtual machine (preferably with Virtual Box) onto which I can load a functional Windchill configuration. Would it be possible to install Windchill without using LDAP, or is it necessary? Can anyone give me some guidance or point me to practical documents?ThanksDimitri.
We are currently using PTC Windchill+ 13.0.2.12 and are working extensively with the Configurable Module functionality.During the configuration process, we noticed that it would be beneficial for users entering configuration data to have the ability to define a default design choice for a design option, representing a standard or most common configuration.By default design choice, I mean a design choice that is initially selected when the configuration is created, without requiring any prior user input. The user would still be able to modify the selection as needed.This capability could provide several benefits:Faster configuration entry for standard products. Improved data quality and consistency. Reduced verification effort, since users would only need to review and modify deviations from the standard configuration. Improved user experience by clearly indicating the preferred or recommended initial selection.For example:Design Option: ColorDesign Choices:Blue Yellow (Default) RedIn t
I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.22 After rehosting from one local VM to another VM, I am unable to create a WTDocument with primary content, and it is throwing File Vault-related errors. Here are the errors that I faced 2026-08-24 00:39:44,155 ERROR [ajp-nio-127.0.0.1-8010-exec-3] com.ptc.windchill.enterprise.servlets.GetCacheDescriptorServlet wcadmin - Could not get cache descriptor from the UploadToCache Service. wt.fv.FvFileCanNotBeStored: wt.util.WTException: Mount not found for host: Hostname = [vmffewa041.eagle.org] Nested exception is: wt.util.WTException: Mount not found for host: Hostname = [vmffewa041.eagle.org]
I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.7 Some of users started to having problems with uploads of their data. Most crucial is a case when user (using NX+WGM) is not able to upload larger CAD data (the smallest file we noticed he cannot upload is only 82MB) when working from home and always gets an error: Upload Failure Connection failure in upload operation But smaller files upload immediately. We couldn't find anything in log files, we tried different replicas and master server as well, we tried different gateways but everywhere the same, certain files simply won't upload. The error points to network connection issues, but we were connected remotely to the machine, sharing screen and it worked fine all the time. Strange thing is the upload fails almost exactly after 14 minutes, although timeout on the server is set to 15 minutes. Just because of this case we increased it to 20 minutes, but it made no difference. Sadly the engineer has plenty of locally
We are experiencing an issue with Windchill Performance Advisor data transmission.The system generated the following notification:Sending of the Windchill Performance Advisor report to PTC has failed due to:Network Failure - check the background method server logs.Event Time: 8/8/26, 7:40 AMServer URL:http://windchill.ni.corp.natinst.com/WindchillPerformance Advisor Page:http://windchill.ni.corp.natinst.com/Windchill/apps/wa/templates/performanceAdvisorMainPage.jspAdditionally, when executing Test Transport from the Performance Advisor UI, the following error is displayed:Test Transport failed. Unable to connect to file receiver please try after sometimeMS Logs:2026-08-08 02:32:37,178 ERROR [ajp-nio-127.0.0.1-8010-exec-4] com.ptc.wa.rest.services.impl.WAServiceImpl wcadmin - ***Exception occurred while sending the report through HTTP mechanism com.ptc.wa.WAException: java.io.IOException: HTTP(S) response code: 406; message: Not AcceptableHowever, our investigation indicates that this i
Hello,As per PTC's recent communication regarding the transfer of the ThingWorx and Windchill Navigate products to Velotic, we understand that new licenses for these products will no longer be issued by PTC.We would appreciate it if you could provide clarification on the future operating model between PTC and Velotic, including responsibilities related to licensing, technical support, product maintenance, upgrades, and roadmap ownership for ThingWorx and Windchill Navigate
How to automatically start CAD worker in ‘Worker Agent Administration’ when status is ‘Failed to Start’? Site Admin has to manually start CAD worker process in ‘Worker Agent Administration’ when its status is ‘Failed to Start’. Is there any way to automate this, so when backend issue with CAD worker is resolved, CAD worker process in ‘Worker Agent Administration’ get start and show status as ‘On’?
I am using Windchill Navigate (formerly ThingWorx Navigate) Release 9.3 and Datecode with CPS 9.3.4 A blank page opens when attempting to open a representation from Navigate.
Hi,I am facing an issue with Windchill Project Plans / Critical Chain scheduling.I have a project schedule with the following structure:Parent Activity├── Parallel Activity A├── Parallel Activity B├── Parallel Activity C└── Main Activity → Activity → Activity → Activity → ...The three parallel activities are intentionally independent from the main activity. They have the same predecessor (the parent activity), but there is no dependency between the parallel activities and the main activity.The intended behavior is:The parallel activities should remain independent/non-critical. The main activity chain should remain the project's critical chain. Completing any of the parallel non-critical activities should not redistribute, shift, or recalculate the existing critical chain. The project structure/dependencies should remain unchanged after completing those activities.IssueWhen one of the parallel non-critical activities is completed, Windchill recalculates the schedule and the critical cha
Has anybody an idea what's behind this change in Windchill 13.0? https://www.ptc.com/en/support/article/CS423384 We have been told that the dot was never really supported but not checked till WT13.0. We and our suppliers are used to have a x.y rev. system for decades! Anybody already changed the system? Side effects?Thank you for your valued answers! 🙂
Hello there,is it possible to define a filter/advanced search (report?) to get an overview of all parts having function of alternate and/or substitute parts?Thank you in advance and have a nice day!- Gerhard -
I am looking for any information on how to enable a dark mode for my in creo Windchill. Last Ive checked it is not an option and I would love it to be. I was able to make my outside browser Windchill dark.
I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.1.2Organization-specific File Name length constraint for EPM Documents We have a Windchill environment with two organizations: ORG 1; ORG 2.The customer wants to restrict the EPM Document File Name length to a maximum of 24 characters only for objects created within the ORG 2.I’ve identified the following configuration path: Organization 2 > Utilities > Type and Attribute Management > EPM Document > File Name > Constraints > Add > String Length.Before applying this configuration, we would like to confirm:If the String Length constraint is added at the ORG 2 organization level, will it only affect EPM Documents created in that organization? Will the configuration remain isolated from ORG 1? Are there any inheritance rules or limitations that could cause this constraint to impact both organizations?Our objective is to enforce a 24-character File Name limit for RG 2 without affecting at all and all c
We are using AutoCAD with Windchill Workgroup Manager and have configured attributes for AutoCAD blocks.The attributes are correctly assigned and visible on the AutoCAD block. During check-in, the attribute values are getting populated/displayed on the main CAD document/part in Windchill, but the same attribute values are not being populated on the corresponding WTPart created from the AutoCAD block.For example, our AutoCAD blocks contain attributes such as:BRED ALLW DEDAR DEDNO DESC DUNO DUQTY RWTThe values are available in the AutoCAD block, and the attributes are also visible on the main part in Windchill. However, the block-specific WTPart is not receiving the attribute values.We have already configured the attribute mapping and are using the AutoCAD Blocks functionality to generate the WTPart structure.Expected behavior:The attribute values defined in each AutoCAD block should be propagated to the corresponding WTPart created for that block.Actual behavior:The attributes are popul
I am using Windchill PDMLink Release 13.1 and Datecode with CPS 13.1.2.9 Is it possible to create an overloaded Part structure and then use Views to show a correct BOM? Generally, we have a panel attached with 4 connectors. Based on the material it will be connected to, the connector and screws will change. (Each structure SHOULD have it's own product number, but historically it has been handled otherwise.)
I am using Windchill PDMLink Release 11.0 and Datecode with CPS M020-CPS16 三维模型没法驱动BOM生成,部分bom驱动数量为0;bom驱动成功后,子件全部丢失,还有部分link上的单位发生变化
Hi All,In WC11 I am using - WorkInProgressHelper.service.checkin(obj, ""); API to checked in the drawing and after checked in automatically CAD Worker was getting published.But In WC12 when I am using the same object is getting checked in but job is not getting triggered .Could you please suggest me which API should I used to trigger Publish through code.Thanks.@HelesicPetr
I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.9 10.2升级至13.0后,在infoengine 发布的接口中创建的零部件不在更新table中显示。
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.