CAD

When opening assemblies from Windchill in CreoView, I frequently experience an error where some of the components do not load.  They will appear in the model tree with a red dot next to the part name.  There is no error message.  The individual parts that fail to load can be opened on their own through Windchill.  Also, when re-opening the assembly with parts that fail to load, sometimes different parts will fail to load from attempt to attempt. This issue has not occurred for any other user at my company and also does not occur for me when using other PCs besides my laptop.  We have attempted re-installing Creo View, clearing the cache, and other common fixes. Creo View Lite version 10.0.0.0 Build 26Windchill version 12.0.2.5

Hi, Creo keeps shutting down because of this error. I have the student version and it basically says that it doesn't have "enough" access but I have already allowed it to communicate through my firewall. Plus, I uninstalled and reinstalled the diagnostic tool and it still won't work. I'll be really grateful ofr any suggestions on how to fix it. Thanks!Error message ↓ 

Hello,Why does PTC Mathcad Prime seem more oriented towards CIVIL and MECHANICAL Engineering, and much less towards Electrical Engineering, and Physics, and more in depth Mathematics? Will this be the case in the future?    

Hello - I looked high and low and attempted searching for this request online and within CREO 10.In CREO Assy you can select one component and change the transparency of that component - but when you go to drawing the view is monolithic - Solid or hidden but not hybrid. There is one component that I want to display hidden line removal to show features within the part. I tried Component Display under Layout/Edit. I went through the prompts - but nothing changes. Is this possible - and why so hard to achieve?I read online about Display States within CREO - but when I search CREO help I see nothing in CREO 10.Thanks for helping.

Is it possible to align tables to another tables or to view or any entity in drawing sheet?

Hello, we migrated from Creo 8 to 11. I have a problem in sketcher, those blue boxes around dimensions. Upon entering a value I cant even see the number. Any Ideas what could be the problem? I dont know if its graphical glitch or some setup/option problem.    

I am looking for a way to create a fastener with _custom_ geometry, meaning that the screw should have geometric features that don't exist at all in any of the IFX screw types. In particular, I am currently looking for a way to create a captive screw that would have the geometry of DIN912 but a captive thread (rod). See attached image - the existing dimensions in SCREWTYPE01 would remain, but additionally I would need a reduced-diameter rod size DC (to make it captive) , as well as full-diameter cylindrical face height DH (it may be slightly different from just a thread height B). I marked my new features and their sizes in red. Is this possible in IFX? I would imagine, I may use any SCREWTYPE1 part as a starting point, modify the geometry, add two extra dimensions as required, adding control of these extra dimensions in the .dat file (i'd keep the "SCREWTYPE  1" in the .dat file) and hope it would work. However before I try that myself I'd like to know if that

I have been using Creo 9.0 for the several years at company, Suddenly, I cannot run Creo because of license error message and AFX&IFX fail. Any idea how to fix this problem? I tried changing the settings to fix this problem but it didn't work.(https://community.ptc.com/t5/PTC-Education-Forum/Creo-doesn-t-work-except-on-the-wifi-that-it-was-downloaded-with/m-p/855599#M13362)  1. License Warning Requesting PROE Engineerlll ... Requesting ROE_MechFoundation ...  -15: Cannot connect to license server.  Run ptcstatus.bat for server status 2. AFX failed to load. 3. IFX failed to load.

Hi I have a torsion spring which is modeled with relations to show it as near to real world as possible. This behaves correctly (as a stand alone model)  adjusting the diameter, body height etc, when the parameters are modified within the spring design. The working deflection range of the spring  is from 0° - 193° between the 2 legs.  When this spring is installed into an assembly and the spring is made as a flexible component and constrained by an angular positions in the assembly model. The flexible spring behaves correctly through the deflection range 0° - 179°, but anything over that, then the angular measurement is reversed. For example at full deflection on the assembly model 193° , the flexible component measurement analysis reads 167° ( i.e. 360 - 193).In the assembly model the spring then appears disconnected.There is no difference if the analysis plot is set to 0-360 or +/- 180.The only way I have found to gain the correct measurement is to manually modify

We work in a dual ECAD environment - PADs and Xpedition. We are trying to move to the IDX standard, but we keep on hitting road blocks, especially with holes. For those that use these formats, how do you collaborate with holes?   Some issues: Current Hole feature doesn't include any copper ring that we would want to be shown on the ECAD side when we send it over. Current BOARD Hole feature doesn't allow for ref des' to be placed PADS doesn't support BOARD holes, only holes in a 'part'. They also don't support MTG hole type. Which means every MTG hole is coming in as a PIN type. However, PIN types are not collaborated upon in Creo for IDX, because they should be coming from the components.   How are you handling holes with collaboration? 

Hello, I want to print a Mathcad worksheet to PDF by using Mathcad15 command (mathcad.exe -p test.xmcd) in order to realize automate batch printing. But it cant't show the list combo box when printing by this way. This problem also appear when printing in the Mathcad15 GUI if I don't pull down the worksheet page to "active" the list combo box, only when I pull down the page and view the list combo box, it can be showed in the printed PDF (case).  Any ideas?Thanks for answer.

I want to solve the following equation at the bottom and get T_react/T_com on one side and the rest on the other side. Is there a way to rearrange the equation like that? I am using Version 10.0.1.0 

This label operation may not be performed on the item XXXXXX, since it is of type Test Suite, and that type has an Add Label Rule. The rule has evaluated to deny permission to perform the operation.

Hello everyone The explode lines always protrude too far over the items, so that both explode lines seem to be in front of the item (see screenshot "before").I spend a significant amount of time to manually pull each end of the explode lines to a reasonable position in the 2D drawing (see screenshot "after"). I assume the reason is the white shadow, as without it the explode line would end exactly in the outline of the item.  Is there any setting that can improve this situation ?I'm using Creo Illustrate 11.0 Thank you a lot in advance

Hi all,am I the only one who keeps losing 3D page sizes and line settings for callouts?I mean, I define a 3D page size and then create the 2D image. Everything is fine. But after saving, closing and reopening, this page size is missing. This doesn't always happen, but againe and againe. Sometimes more often, sometimes less often.In the same way, CI sometimes loses the line setting of callouts (white shaddow, line thickness).It is annoying. What could be so difficult about storing the settings securely in a database? Is there someone else havin the same problems? Best regardsRamon(Siemens Energy)

Good morning,  I'm having a similar issue, the thread note that you are seeing is a note of a cosmetic thread,  In the holes made with standard hole  i can apply the note that i would from the .hol file but in the hole made with cosmetic thread i'm not able to understand from where it's taken and i can't edit.Even if in the cosmetic hole thread i'm selecting the same library of the standard hole with the "right " note i'm not able to obtain the result this i want.  any suggestion? Thanks! Reference topic: https://community.ptc.com/t5/3D-Part-Assembly-Design/Cosmetic-Thread-Class-Issue-Creo-5-0/m-p/612900#M65730 

We have aging licenses of Mathcad 14 that we've kept going as long as possible but the end is nigh. Mathcad Prime's licensing is a yearly rental and I don't want to do that. We've evaluated seveal replacements. Does anyone have any opinions on this Maple Flow product? Can't use smath because of security. Other tools like Blockpad are too distant from Mathcad.

Hi, using Mathcad 15.0. I have a solve block producing some very strange units, and I can't get it solve with the right units.  If I take each result out of the Find, the units are right. Anyone know how to get this to work? Mathcad file attached.

I used to enter &model_name:d into the title block.  We just upgraded to CREO 10.  I tried adding the parameter to the drawing even.

My team has been working at solving this problem for ages and we can't seem to find a suitable solution. Our fab shop uses formed part drawings instead of flat patterns for forming sheetmetal; they require dimensions for bends to reference the apex of a bend. This is normally fine, but when it comes to joggles, we're not able to come up with a method that works for engineering drawings and our press operators. I've attached a simple part showing the desired dimension and the dimensions that I'm able to achieve in a .dwg.  Has anyone managed to find a dimensioning method that produces the dimension in the attached "Model Example"?

I am working on a new illustration.  When I open the illustration and drag/drop my items from the sBOM to the Item List, it automatically brings the items in by CAD location (First Image).  This oparticular illustration has 67 items. Our company does out parts manuals in numerical part number order, so I have to resort the list by Item tag order (Second Image). Doing so, requires me to renumber the ITM list manually as I have found no way to do it automatically. None of the options in the Item List tab / Numbering group help.  I must manually change the number down to ITM #1 manually, which in this case will take over 63 clicks of the mouse.  The next item will take over 42 clicks of the mouse.  I will have to click thousands of time to renumber just this one illustration. Does anyone have any info on how to get the system to do a renumber by Item Tag order?  It would be a life saver.  I put a ticket in on this a few months ago and it was ac

Attached is a Prime 4 file that allows you to plot text in a graph, like: Of course it runs in Prime Express...   Enjoy! Luc

I have downloaded the trial version of PTC Mathcad Prime and want to review how the current version of the software compares with my previous use of older Mathcad versions.  I have a file from Mathcad 11 in .mcd format, and when I try to use the PTC Mathcad Prime 10.0 1.0 XMCD, MCD converter, it does not convert to the new software format.  The converter says license is not found.  Is this type of file conversion available in the trial version of Prime?  I no longer have the old version of mathcad on my current computer. 

Hi, I am trying to implement a repetitive tasks that opens a listed drawing in a new window and exports it in a different format. and that it can be stopped during repetitive tasks.   Work scenario) The repetitive tasks is implemented with a "for" loop, and the task of opening and exporting the drawing is temporarily implemented with the "EmptyWindowCreateAndDelete" function.   use a window procedure to respond to the user to stop during the task. When the window procedure window is closed, the loop stops.   This function is effective in loops. The TEST2 function works only with the loop without EmptyWindowCreateAndDelete, and when the user closes the window, the loop seems to stop in the middle. (view in My Videos) However, when used with a function that creates a new window like EmptyWindowCreateAndDelete, the window procedure does not respond to the user's click. (view in My Videos) Is there a better way to stop during the looping task, or is there a way to make the w

I am using Creo Parametric Release 5.0 and Datecode5.0.6.0   Does Creo support downloading models from two different Windchill systems in one workspace to simulate assembly and check for interference?   Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Creo是否支持一个工作区从两个不同的Windchill系统中下载模型，进行模拟装配和检查干涉？