CAD

Hello to everybody, I need to import a 2D drawing (DWG format) with made with several "page".To achieve this result, I set ReadAllLayoutData ON and SideBySideLayoutView ON in DXFDWG.conf file. When I load the file start the conversion that requires a lot of time (in  the drawing there are some geometry but many texts).The file size is 71MB!In the end, all 'pages' are imported correctly but, surprisingly, all texts are converted into geometry!The texts in the original file are "text" not geometry. Any suggestions?Thanks in advance. I tried with ME10 20.5.1 and ME10 19 M070 with same result.

I find this comportement very strange but i know that it's possible to drive a dimension with a parameter in inheritance:1-PART A with dimension driven by parameter2- PART B with PART A in inheritance and with variable parameter and relation but with error with = or ==And with == i obtain this errorBut when i put this parameter A in family table creo calculate the value with good value in each instance but with relation error  Why creo permitte to do this if not possible??Many users test naturally to drive this...The other metod is to drive a dimension via a inheritance part with a parameterThank you very much for your reply 

Hi, Everyone.From the following:   The Question 1: How to Rotate A around BC-axis with angle t ?The Question 2: How to Rotate B around CD-axis with angle t ?   Thanks in advance for your time and help.Best Regards.Loi.  

Hi PTC,   I have trouble to open my creo 3.0 recently after my computer updated.  Every time I click to open to software the warning window pops up with message:     "License request failed for feature   Requesting PROE_Essentialsl …   7788@bsrpc127:(-96) License server machine is down or not responding."   Anyone has the same issue?  How to fix this?  Thank you so much.   Sincerely regards,  

Hi guys,  I just installed MathCad 8.0 and tried to give an value to F. Every time i tried to do it i am facing an error that i will put the video and photo of this below. I tried to figure out what is wrong with program and  I have repeatedly repaired .net framework, activated old .net framework versions from program properties, installed updates and nothing changed. When that didn't happen, I formatted the computer and reinstalled all the drivers from scratch, still nothing changed. I leave the video, screenshot and .log file below. My System Specs:Asus Rog Strix G15 G513QR16GB Single ChannelAMD Ryzen 5900HXNvidia RTX 3070I would be very glad if you help.          (view in My Videos)

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0Random exitTracebacks in attached documentHere are the errors that I facedRandom exit with Tracebacks

Hello, I have a hexagonal lattice feature which intersects a flat surface at 90` I can add the vertical rounds to the lattice itself via the feature, but is there a quicker way to add rounds to the edge that intersects the lattice and flat surface? rather than selecting each of the bottom edge of each of the hexagons? There is approx 150 Cells in the lattice and its quite tiresome to add them all in. Other CAD platforms have intersection selection control, but i cant seem to find anything in creo, even using closed/partial loop or selecting edges by filter? Any help will be appreciated.

3D Copilot question.For instance during creating an extrusion: I can draw the handle for the depth and it will change by 1mm steps - where can I change the setting to smaller or bigger values/steps than this 1mm? Additional question - is there an keyboard shortcut to disable the defined grid during drawing the handle?

wf4Simple sounding question... i have a surface with a hole in it that I want to fill in. Boundary blend doesn't seem to work. How do I go about filling in the hole with a surface?

Hello everyone,I am a complete beginner in MathCAD and would really appreciate if somebody would help me define this with the values I provided. I tried to define the function but it just wouldn't work and I'm not sure what I'm doing wrong.     

I am part of a four-person company, two of whom use Creo/PTC without a PDM/PLM.  We use folders on OneDrive for development and that works really well. We include the rev in the file name and always rev the entire assembly using File > Save As to a new folder. It’s really nimble for development. Once we release for tooling, we have been using Grab CAD workbench. It works oookay but, Grab CAD is discontinuing Workbench, so we are looking for a new solution. I would really like to do something more similar to how we handle development, but am stuck on how to handle the drawings. The workflow I am imagining is –Development starts at V1, stops at, say, V50All parts released at Rev A (with Rev A in the file name)File > Save As (to a new folder) > change all file names to Rev AWe want to make a changeOpen Rev AFile > Save As (to a new folder) > change all file names to V51Make the changesFile > Save As (to another new folder) > change names of parts t

I was informed by the guy that I trained to take over my job, that in Windows 11, the ability to create custom toolbars has been removed. Since I’m still working part time, I continue to be interested in the system setup and making sure things continue to work for the end users. I saw some rumors on the web that they removed this because of security concerns. I don’t understand what could be of concern, and why they didn’t just fix whatever concerns there were. I think it’s important to describe how we use custom Task manager toolbars in windows to standardize the environment for all the users. I’ll use our older toolbar for Creo 4 as an example because it’s a bit more streamlined, than the Creo 8 toolbar. To create a toolbar you right click on the task bar and pick Toolbars, New toolbar…  It brings up a explorer window and ask you to pick a folder. The name of the folder will become the name of the toolbar.  The content of that folder is just shortcuts an

I am using Creo Parametric Release 7.0 and Datecode7.0.9.0I cannot change the color of my sketch lines. The User defined options are greyed out.

I am using Creo Parametric Release 8.0 and Datecode 8.0.5.0Creo8 application is running on a virtual machine. The VM host is equipped with a NVIDIA graphics card (GRID T4-4Q). When running Creo on this VM, the user periodically notices the Creo main window and the displayed model getting blurry. This lasts for a split second only each time, nevertheless it is very annoying for the user. Only this blur effect happens, no display freeze or any other similar graphics issue. Other 3D applications (e.g. CATIA) do not show this behaviour. Are there any specific settings for this NVIDIA graphics adapter (GRID T4-4Q) which can be applied on the system settings panel of the graphics adapter?

My Dell Precision workstation has a Quadro RTX5000 .... It's amazing to use.  I spoke to an Industrial designer friend at Dell before purchasing this laptop and he said never skimp on a video card so I didnt.     3840 resolution on a laptop!   So I was thinking and after using it for the past few years of a few enhancements that might be noted for future releases of Creo.   I thought I would bounce just one by the folks on the forum.  So many probably don't know that if you draw a line in sketcher that you can change the linetype *ptc calls incorrectly a 'linefont' .... One can also change color.  I also want to also change the line thickness and have a few selections or even be able to increment thickness of lines.  Maybe a developer would consider an option to have the line weight pull thru surfaces or solids as if the surface or solid had a slider for opacity.   Thoughts? One Creo 9.0 question:    I

I have seen compound IF statements that evaluate numerical values.  e.g.  if (a=1,2,3) How can I construct a compound IF statement where the variable being evaluated is text?  I want the IF loop to run if the text value Fault is A or B. e.g.  if (Fault="A", "B")  thanks,relayman p.s. Prime 8

I have that issue. Mathcad prime 8.0, excel 365 64-bit. Does anyone know why this happens? Thanks in advance.

As per the original post.    Hi VladimirN,   I am currently using Mathcad Prime 8.0.0.0 with a trial license. I am having an issue with the Excel component and am receiving the error mentioned in the article. However, I do not have permission to access the file as I am on a trial license. Would you be able to recommend any possible solutions? I am using Office 365 and have updated to the most recent version. I have also tried restarting my computer and have tried the Excel component on multiple worksheets with the same error.   Thanks!

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0I cannot save the file (model, drawing) or upload it to the serverHere are the errors that I facedServer error: Cannot retrieve family table neutral data

hello friends how to we change the primary axis word form C to B in the creo post-processor??  thanks asif  

This is a quiz for age 12. How to solve this by using Mathcad?

Hi, I am an Schweitzer Engineering Laboratories, Inc, i don't have the product code. I am trying to do some basic calculations. i was not able to create the custom unit for the thermal resistance, which is used for calculations in estimating the junction temperature in MOSFET.Theri is some unit conversion problems if I add 1 deg C to 5 deg C the result not 6 deg C instead 279.15 deg C. There are other errors, I really need the help in completing a project, my Email ID is: anuroop_reddy_dasari@selinc.com.

We are trying to send the project to some of our suppliers so that they can manufacture it based on 3D. Currently it receives the models in the STP extension, but when receiving it, it complains about surfaces that are divided. Below is how the part looks in CREO. Below is how the supplier receives the part after importing it, it uses Solidworks. the files are exported as shown below:  Is this a configuration of CREO itself or is there a way to remove it?

Hello   There seems to be a calculation error in my fred (marked with red box).   When I do hand calculation / Excel-calculation the value is ca. 1.68. It is correct that the units drop out of the function as I hand calculated.   Could someone figure out the problem?   *here are again the inputs  rho = 1.2 [kg/m3]  ze = 7.64 [m]  zg = 380 [m]  alpha.r = 0.19 [-]  qp.0 = 0.9 [kN/m2] or ca. 91.74 [kgm/s2/m2]  f0 = 1.64 [Hz] or 1.64 [1/s]   Best regards,   Samuli Turunen

I am using Creo Parametric Release 4.0We are having issues creating a new user and was wondering if we can get some assistance. We do not have an admin account available in Creo but we do have admin access to the windchill server. I was wondering if we were missing something with adding a user and can add it through the windchill server. Or is there a way to add a user in the application itself