CAD

Why the component (Guide frame) leaves it position while converting .asm to .step to .prt. Purpose is to get all comp in one with no history but right positions. Pl Guide what is making this move.Thanks in advance!

I have to install the "PTC License Server (FLEXnet Publisher) 11.19.1.0". But the Download-Link from the PDF PTC FlexNet License Server | PTC does not work. I only got a blank Site with a text (a2d9bf28e43b0f35a8b4a4a600957bd52a991866432ee733c8d45aab8bb5037a flex11.19.6.1_x86e_win64.zip Where can i download the License Server? 

I am using creo object toolkit java to make some secondary developing.Suppose I have get the ComponentPath of a part or component in an assembly model. Which function can I use to hide and unhide the part or check its hidden status. I read the usergudie a thousand times and could not find one. Belows are functions I have tested.com.ptc.pfc.pfcModel.Model.Displaycom.ptc.pfc.pfcSelect.Selection.Displaycom.ptc.wfc.wfcSolid.WSolid.DisplaySolidSadly, none of them help.Does the toolkit provide the function to programmatically hide and unhide part, just like hit the button in this picture?

We are partnering with another shop that has sparse data for converting their dies for machining purposes.  Sometimes we get part models, sometimes dirty geometry die models and sometimes absolutely nothing. In the most recent situation all we have is a scan of the top and bottom dies.  The die impressions themselves don't have any sharp edges, and the radii sometimes wipe out the draft walls.  There would be a combination of revolves, extrudes, lofts and there are locked transitions.  We are tasked with reverse engineering these dies to make parts that size accurately and within a timely matter. I wish that I could share a screenshot of the actual dies but that would be proprietary in nature. I have been told that machining the actual STL is very slow and not very clean. Can you suggest the best way to convert the STL scans into at least sealed, accurate to machine surfaces?  It would be nice to have these parametric, but that would require

How can I create a custom connector, such as a dual-port connector with both LH (Left-Hand) and RH (Right-Hand) variants?I’m trying to build a similar connector but I'm stuck on a few points:How to create a dual-port – When I use a simple port, it only creates a single port and not a dual one. So, I’m wondering if I need to create a dual port first, since it’s not available in the default port options.How to replicate the behavior of the default connector setup – For example, when I select a default connector, a window pops up asking how many ports I want. I want to create a custom connector with the same functionality.I've attached an image below for reference. 

Hello can anyone help me with opening a .mcd file ? its very urgent and I dont have version 15. I have 11 prime for 30 days only.your help is much appreciated 

After inserting a numeric value from another mathcad document and highlighting it with the cursor, the inserted number is highlighted with green brackets. What does this highlighting mean and what does this option allow you to do?

I am using Mathcad Prime Release 9.0 and Datecode9.0.0.0I need to convert legacy Mathcad .xmcd files to Mathcad Prime .mcdx format, but the XMCD, MCD Converter button on the Input/Output tab is grayed out and unavailable.Here are the errors that I facednone; see above

In the drawing driving model we have a manual user entry parameter called "Drawn" which is used in the drawing title bock. Per ASME standard this needs to stay as the original (rev -) creator no matter what rev the drawing is changing to in the future.   We tried using part relation to drive the parameter:  drawn=ptc_wm_created_byThis parameter updates every time to the person who created the new revision of the model, hence the title block name changes.    Is there something we can automate that doesn't change like:  drawn=ptc_wm_created_by:revision-    Thank you in advance.

Hi,In the assembly I renamed one part and saved the part and the assembly. Later I converted that assembly into 3d pdf format.  When my client opened the 3d pdf file, and found that old part number only appears in the 3d pdf model tree.  This is getting solved by saving the assembly and closing all the parts & assemblies and session. After that I have to do Erase not displayed to remove all the temp file. Then I opened the creo assembly and converted to 3d pdf. Now it is working fine.

Welcome to Blog Post #21 in Our Multibody Series!   In today’s post, we’re diving into a powerful new capability introduced in Creo 11—the ability to reference an existing point/coordinate system based pattern in a geometry pattern of type "point" pattern. This enhancement can significantly streamline your workflow, especially when working with complex body patterns. To get started, check out the What’s New video linked below. The first section highlights the benefits of the new “From Pattern” option in point patterns, which helps accelerate regeneration using the “Identical” or “Flexible” regeneration modes. Around the 50-second mark, the video also demonstrates some useful body patterning techniques.   (view in My Videos)   While the video covers the basics, here are a few key tips and tricks to help you get the most out of this feature: Patterning Bodies with Coordinate SystemsUse a pattern of coordinate systems

Requesting EMX team to separate "Return pin" from ejector pin category.  The issue is during cleaning up ejector pins using command " delete all ejector pins" , this return pins will also get deleted and need to reassign all the references related to it. kindly check.

但是现在使用的版本号为Croe 12.4.0，映射键F2，为显示/隐藏轴，当映射键F2在组件时可以正常使用;在零件的时候F2就无法使用了，零件状态的时候按F2无任何反应（如果不使用映射键，在快捷键中设置F2也是可以正常使用的）

Hi everyone,A customer of mine recently encountered a question while using Mathcad Prime. They created a 2D plot using the Insert Chart function (as shown in the image below), but couldn't find a way to display the grid lines (both x and y) in the chart.I’m not very familiar with the plotting settings in Mathcad Prime, so I’d appreciate any help. Is there a setting or option to enable axis grid lines in a chart?Thanks in advance for your support!Best regards,Lan

The Creo Parametric CAD application currently supports drag-and-drop functionality for opening design files directly within the session view area. However, as part of a customization initiative using Creo Toolkit, I am seeking the ability to intercept these drag and drop events when a file is dragged into the Creo Parametric session. At present, there appears to be no API available within the Creo Toolkit that facilitates the interception or handling of these specific events. Upon reaching out to PTC support, I was directed to knowledge article CS230497, which confirms that capturing drag and drop events through the Creo Toolkit is currently not supported. The support team recommended submitting this as a product enhancement idea. Therefore, I’m formally requesting the addition of APIs to the Creo Toolkit that would enable developers to capture and respond to drag-and-drop events within Creo Parametric. I invite fellow community members to vote for this proposal to help

  can somebody tell me why this is saying units are not compatible, it works when I take it out and do it by itself??Thank you

Hello, I'm having troubles using this two funcitons. Effect I'm expecting using this two functions one after each other. I see the same thing without changes by getting actual transformation and applying it to the model. Now let's see what's actually happens let model = pfcGetCurrentSession().GetCurrentModel() let transform = model.GetCurrentViewTransform() model.SetCurrentViewTransform(transform)This code retrieves transformation from opened model and i expect this transformation to be correct because I do actually see it in model and there is no errors in it. But: Uncaught Error: pfcExceptions::XToolkitBadInputs in ProViewMatrixSet at <anonymous>:3:7Is there any extra step needed to repair transformation gained directly from model?

Good morning everyone!How do you explain the out-of-memory status in this case (see photo) when Task Manager shows that only about 9 GB of 32 GB are used? Thank you to everyone who can answer this.  

Hello, After subtracting two vectors, how do i set the element value to zero if it is negative? P9 sheet is attached.  Thanks,Sam

I create parametric bitmaps that depend on the values of the calculated variables using the READ_BLUE function.How to insert a numeric value into such a picture as a bitmap that changes depending on the calculated variables?

Hi guys.   I have a quick question about simplified reps in drawings. I know you can change the simplified representation for new views in the drawing models sidebar, but I need to know if there is a way to change the representation for already created views. I have a part that was drawn as the master rep, but for a long list of reasons, that iteration of the part is now a simplified representation. Is there a way to keep the drawing the same? In other words, can I change all those views from the master rep, to a simplified rep without deleting and redrawing them all?   Best Regards, Alex

Creo Parametric 8.0 I use OTK JAVA replace session model not find the API..so ...................I want  Model.EraseWithDependencies then session openFilebut ....................some model its success ,some model fail throw XToolkitInUse everyone................you Know how to do replace session model? (physical has new verison but session model is old version)why the Model.EraseWithDependencies throw XToolkitInUse? 

I get really confused about this, it should be as simple to put the font to the load point of the font folder? The one where config.pro points with the pro_font_dir? I have it all set upmagyar_iso30985font.ndxhu_latin_1.fnthu_ascii.fntThe ndx contains the fnt names:hu_ascii.fnthu_latin_1.fntThe font is loaded, but where the hungarian (ő for example) char should be shown, there is only squares like this:  The font is proper, and was working before, any ideas?

Whenever I print to PDF, instead of the file name coming out as the drawing name i instead getthe prefix Creo Parametric - (character that looks like a chessboard), then the file name, then four additional digits.This is not just Adobe, but with other pdf print options too.So each time I save I have to delete this extra detail. which is really annoying and time consuming.But if I save as PDF it screws with text and line thickness.  I can't find where it is pulling this additional detail from, or how to stop it. Thanks in advance if you can help!  

Hi everyone,I’m currently exploring Creo’s multi-axis manufacturing capabilities, specifically for impeller machining. I’ve already programmed and machined an impeller using Creo Multi-Axis, but all the strategies—roughing, blade finishing, and hub machining—had to be created manually. (Please see attached picture.)Other CAM software like Mastercam and Siemens NX offer dedicated modules or toolpaths tailored for impellers and other bladed components.So I’d like to ask:Does Creo offer any specialized tools or modules for 5-axis impeller machining?Are there built-in strategies for blade-to-blade finishing, tool tilting and collision avoidance, and roughing in deep/narrow passages?What about hub finishing with smooth transitions?Or is everything expected to be built manually through generic multi-axis features?I’d appreciate input from anyone who has experience machining turbomachinery parts in Creo.Thanks in advance!