Solved

Hello!In my case, I would like to plot an S–N curve for fatigue life.I need the initial slope to be m = 3 or m = 5, and after the knee point, the slope should change to m = 22, specifically for the high-cycle fatigue region.On the Y-axis, a stress range up to 300 MPa is sufficient.On the X-axis, I need the range from 0 to 4 × 10⁷ cycles, and importantly, the X-axis must be in logarithmic scale.I have attached an example S–N curve below for better understanding.I noticed that there is a logarithmic scaling function available in Mathcad plots, but I am not able to apply it correctly for my specific case. BrNLAAL  

Question related to this old post   I was able to load only Change Requests using OOTB , Other Change Objects gets me an error for loader method.   Can anyone help?     Thanks.

Hi,anyone can tell me how turn off the  "welcome to Creo browser" when Creo 9 is turn on? I can't find on the config setting  

Hello Team, Could you please help me for below issue.Creo drawing lifecycle state in title block mismatch with Drawings state in Windchill. But it is taking related CAD part/ASM Windchill state. Thank youKumar B

Version: Windchill 13.0 Use Case: The link below explains that it is possible to create add "Affected Objects" to a change task within a change notice when creating the change notice using a REST API call. https://support.ptc.com/help/windchill_rest_services/r2.5/en/?_gl=1*ylfb42*_ga*MjAzNzQyOTYzMC4xNjc4MTcyNTE4*_ga_1QBT6P6HR1*MTY3ODE3OTA5Ni4yLjEuMTY3ODE3OTA5OS4wLjAuMA..#page/windchill_rest_services/example_changemgmt_create_changenotice_mul_tasks.html#Description: I have been able to use this script to successfully create a change notice which features a change task with an affected object included on it. I have developed this script further in an attempt to also add "Resulting Objects" (see below). When I add this script into the request body, the interface reports no issues and it seems as though the call runs successfully. When I navigate to the "Changes" section of Windchill, I can see that the change notice was created along with the change task and affected object. However,

The bolt shouldn't need a nut. I'm just pulling against the slot to see if we can simulate the failure.I can't imagine that would need to create an imaginary nut for this. What is the best way to create a contact and maintain the cool bolt functionality? (without a nut and another imaginary part for the imaginary nut to connect to) The actual assembly does not have a nut at the end of this bolt and I'm not testing the "pull out" of this bolt in the other part - just the failure of the thin area of the slot. 

Im having issues trying to communicate KepServerex V5 5.13 with BACnet server Automated Logic WebCTRL. The server have some HVAC, eletrical and Diesel equipments, but some of these devices are listed on ARCnet network. They dont have IP Address, or MAC Address that i can read, they have their Network Number, 1 MAC Address digit and their Device instance.I managed to connect some devices to Arcnet, but these devices are listed under Routers that are configured as BBMD Devices, and the other devices listed in other ARCnet networks, i can't link or manage their communication in KepServer BACnet/IP driver. Configuration for ARCnet devices that are communicating:Kepserver device ID: <network number listed in WebCTRL device> . <device instance listed in WebCTRL>.Kepserver discovery scope: Using Who-Is/I-Am - Remote Scope.Kepserver COV: Do not use COV. Error messages:- Error reading tag '<tag_address>' on device '<device_path>' (Class: 1 (Object), Code:

I'm looking for a way to export or save as multiple CREO 4.0 part (prt) files to step (stp) files into a windows folder.   

I am using Creo Parametric Release 8.0 and Datecode 8.0.12.0I have some Creo VB API program. All work fine if you stay on same network all the time. If I start Creo with LAN (eternet) connection and take my laptop to a conference room with WiFi. Then I cannot connect with Creo API.Here are the errors that I facedpfcExceptions::XToolkitNotFoundCode:Public Shared Function ACon(sender As System.Object)'Connect to Creo... first with last saved connection data...Dim cs As String = $"c:\ptc\Creo8\connection_string.ini"TryIf File.Exists(cs) Then connection_id = File.ReadAllLines(cs).FirstOrDefault()?.Trim()local_connId = ConId.Create(connection_id)asyncConnection = ccon.ConnectById(local_connId, ".", 30)Catch ex As ExceptionIf asyncConnection IsNot Nothing AndAlso asyncConnection.IsRunning ThenasyncConnection.Disconnect(1)End IfEnd Try'If it did not work above, try to connect with std connection string, if failed kill pfclscom and it might work next loop..If asyncConnection Is Nothing ThenSys

We are looking into implementing SSO for our customer.Initially we wanted to go with the simpler implementation using Shibboleth As SP and Microsoft Entra as IP. What other solutions would there be with and would be the complexity level of their implementation?

Dear Sir/Madam,I need to perform calculations for my studies and have set up a Windows 10 computer and installed my student version of Mathcad 15. Unfortunately, Mathcad 15 cannot be activated because the license server is no longer available.Can you help me activate Mathcad 15?Thank you in advance.Best regards, Dieter

I have a code that is looking through the matrix and selects creepage based on my input parameters (PD, MG and working voltage WV). It works great....in picture 1. picture 1 Now, I want to add a linear interpolation between 2 values of the voltage. I made a variable "a" doing linear interpolation and tested it works as expected, which it do. Column variable for searching in matrix is hardcoded at the beginning for test. Now, since it work, code A (linear interpolation of the creepage) replace code B (that is using only search method w/o interpolation) in the original code. That is the only change in original code. Code A is tested it works, gives values I need but after A replaces B function that is calling creepage(WV,PD,MG) is complaining "These units are not compatible". What am I missing? I dont see any problem there. thanks Running on Mathcad Prime 11.0.1.0

Hi all, I have an assembly with 4 sub-assembliesUnder this 4 Subs, i have some components I would like to obtain something like this, but automated with a BOM and special Symbol in place of BOM BalloonsBut... I tried:- Nested tables- A table with several repeat regions (one by Sub-assembly)- table with model columns Without any success.How could i obtain the above result with CREO? Regards

We have an issue with a single user that is unable to send email from within Parametric 10.0.9.0. It will save as and generate files without issue but will just close out of the program entirely when it would usually be opening Outlook. It does this with all file types. Event viewer shows xtop.exe crashing but not much in the way of info. Other users can send without issue. Outlook has been repaired and stripped of add-ins to test. It is functioning fine.

Version: Windchill 13.0 Use Case: When clicking Remove in Part Structure, the prompt does not display the part number. The prompt only shows the part name instead of both the name and the numberDescription: Hello, It could be very helpfull to be possible to display both part number and name in prompt when removing an part in Bom. Today, when clicking Remove in Part Structure, the prompt does not display the part number.

The table in .drw is not updating if I change .frm save and reload. Somrthing in .drw is not updating to see latest format file. SEE IMAGE of .frm and .drwChange in .frm [B TO C]Upadte in .drw still show B

Hello,I did some research on ThingWorx Analytics, but most information I found is quite outdated — the latest updates seem to be from around 2020. In our company we use the ThingWorx platform and we would like to implement some AI-based enhancements for our condition monitoring.I still have a few unanswered questions:Are there any recent updates regarding neural networks or the overall capabilities of this product?What are the requirements for implementing it into our existing ThingWorx platform? (For example, a specific platform version or any additional components needed?)How much information can it use when building a high‑quality neural network?For example: I have raw machine data such as position, temperature, vibration, RPM etc. — the standard numerical data.But I also want to use maintenance data (interval maintenance) and fault data (annotated in historical datasets for learn the neural network how data looks like when these events occur). These types of data can also be non‑nu

Hello, I’m having an issue in Creo Drawing:When I select a dimension and go to the Tolerance tab, all options (General, Shaft, Hole) are greyed out/uneditable.I have already enabled tolerances in the model properties.I have already retrieved ISO tolerance tables.The dimension is not a reference or driven dimension.Curiously, some drawings work fine, and their Tolerance tab is fully editable.Has anyone encountered this? How can I enable the Tolerance tab to edit tolerances in drawing dimensions?Thank you!

I can connect to my Engel IMM via UA Expert, but I am unable to find the information to make the same connection via Kepware Server.  Where can I find the information or can someone provide me the information.

im a begginer and im having trouble making a cooling vent on a revolved surface ... i could just sketch the all the shape on one quarter ( mirror after ) then project it and maybe use punch or something like that to get the slots , but it seems like too much work and not really the smart thing to do , is there any other way i could do this ? not only the patterining it self is a problem but also having the pattern not cross the 120 diamter circle and the smaller circle ( the one with the hole ) , the modle comes from an exam question at the uni im learining at ... im using creo 10.9 thanks a lot 

Hi everyone, I'm doing this creo excercise and amquite confused seeing how the tutorial video handled this part of the drawing.tia!link to the video I'm referencing: https://www.youtube.com/watch?v=ssI7dJEkdys

How to modify this symbol? I want to change value of  2 PL to .01 

I was trying to convert a mathcad 15 file to mathcad prime 9, but I get an error in solving for this variable I placed all my guess values and constraints but it still does not work. Refer to the pictures with the solve block and how it was performed in mathcad 15.Mathcad 15 how it was performedMathcad prime 9.0 error in solve block 

Hello All, I’m trying to simulate torque applied to a ¼” hexagonal driver to a reduced A/F set screw. I have set the simulation up but getting very high stresses in the results. My question is does applying the ‘total load at point’ effectively divide the moment load by 6 in this case, the point created is at the centre of the hex? Due to the stress reported I suspect I may have to divide the torque value by 6 manually when setting the load up?