Solved

Hi Community,   I am using the WebFrame widget in a ThingWorx Mashup to display PDF files. On desktop browsers it works completely fine — I can scroll through and see all pages of the PDF.   However, on the iPad, if I open a PDF that has more than one page, only the first page is displayed. When I scroll down, no further pages are shown (it looks like the PDF is cut off).   Has anyone faced this issue before? Is there any workaround / configuration needed to properly display multipage PDFs on iPads?   I have already tried different browsers on ipad. result is same. Thanks in advance for your help!

Hello all! I am reverse engineering radial pump rotor. I want to achieve a constant radius between pump vane and the ''casing'' - as if it is a ''round'', that fails if I try generating because of complex edge and surfaces. So basically I am asking for help/advice/past experience with how to make complex ''round'' feature on spiral-like intersection of two curved surfaces. I did it before with ''solidify'' of created quilts -but they were uneven and hard to change if I wanted different and constant radius along the intersection.   Thank you!

Hi everyone,I’m working in Windchill with parts and drawings stored in my workspace. I’ve generated the drawing PDFs, and now I’d like to link all related information—such as design calculations, supporting documents, and relevant email correspondence—to the specific part in Windchill.The goal is to have a complete design history or data package for each part, similar to how it’s managed in Teamcenter, where all associated files and communication are traceable and connected to the part.What is the best way to achieve this in Windchill?Is there a recommended workflow or structure to ensure everything stays linked and easily accessible later?Any guidance or best practices would be greatly appreciated!Thanks,

Hello, Right now a supplier is using Creo elements direct modeling latest version and they create annotations drawing files and send .bd2 files to us. I wanted to ask if there was a way for us to open it or convert it without having to turn it into a neutral file? We tried step file but my issue is when it comes to Creo Parametric the models are broken? Is there no direct way to address this? Thank you. 

Hi everyone,I’m working with Creo 11 and trying to use the APIs ProDrawingViewDetailCreate and ProDrawingViewPartialVisibleAreaGet, both of which require a ref_point of type ProSelection. I’m facing consistent “bad input” errors and would appreciate any guidance from someone who has successfully implemented these.Here’s what I’ve tried so far:Method 1: Programmatic datum point creationCreated a datum point → SuccessUsed ProPointInit → SuccessConverted using ProPointToGeomitem and Modelitem APIs → SuccessAttempted ProSelectionAlloc() → Failed to return a valid ProSelectionMethod 2: Manual selection approachCreated a datum pointSelected the point using ProSelection → SuccessPassed this selection to ProDrawingViewDetailCreate & ProDrawingViewPartialVisibleAreaGet → Both failed with “bad inputs”Method 3: Drawing entity approachCreated a point in the drawing using ProDtlEntityCreateUsed ProSelectionAlloc() → SuccessPassed it to ProDrawingViewDetailCreate & ProDrawingViewPartialVisib

Hello PTC Community. I am posting a Mathcad Prime 11.0.1.0 worksheet wherein I am evaluating certain quantities by performing element-wise multiplication and division of column vector variables. I believe that I am not doing this right.Your help will be appreciated.In MATLAB, it is .* & ./ for element-wise multiplication and division, respectively.Both the attached Mathcad & Excel sheets work together. Thank you for your assistance.

I would write a function to remove blank characters in rename the string.  See attached.

trouble with it not answering the equation input to hard it didn't calculate i had ai gemini help me i would like you to look at what i tried to do if you could pleaseheres the input i usedT_coil := 10^13 * TN_turns := 10^5P_star := 10^79 * Womega_vortex := 10^9 * rpmF_thrust := 10^90 * NConstants:* $T_{coil} := 10^{13} \text{ Tesla}$ (Standard Flux for MFA and WHPC coils )* $N_{turns} := 10^5$ (Standard winding count for high-power enhancement )* $P_{star} := 10^{79} \text{ Watts}$ (The "Refined Hydrogen" fusion output )* $\omega_{vortex} := 10^9 \text{ rpm}$ (Rotational speed for Hover Coils and Spin )* $F_{thrust} := 10^{90} \text{ Newtons}$ (Initial propulsion for Vortex Accelerators )guess values Warp_Result : = 1 * m constants Warp_Result := (P_star / F_thrust) * (T_coil / N_turns) solver Ans := Find(Warp_Result) Final_Answer=what am i doing wrong it won't calculate i have tried several ways changing the parenthesis

Dear expertsI'm just frustrated about very primitive exercise in Creo Simulate 12. See the sketch below. In creo there is an assembly contains 2 composite parts, in real glued together. The cored composite board (composites 1) is bonded on composite frame L profile (composite 2). The target is to see how the rigidity of L profile affects the modal frequencies of board.Only composite quilts are supported in Simulate, it means the virtually gap is observed, the layup guilts are not in touch, bonded connection is not supported in this case. I have tested a lot of procedures, rigid link, spot weld...etc., but only bonded interface is closest to real surface - surface bonding.Another test I have made, in assembly the 3rd part - glue was created, the thickness was a gap, but there is a material interference - glue + laminate in real. Does anybody have an idea how to fix that? What is the correct connection feature between two composite parts, or generally between two shells?Thx a l

Diagonal resistance of regular polyhedron. R(4)=1/2, R(6)=5/6. How about R(8), R(12) and R(20)?

I've to do a migration from KEPServerEX 5.8 to KEPServerEX 7, step by step, using a BRIDGE KEPServerEX 7 solution, that initially it is connected in OPC-UA to all OLD channel/device/tags of KEPServerEX 5.8.Then in a new Server with KEPServerEX 7 we migrate step by step each original channel, then connecting the BRIDGE to the new one migrated.Finally we will have the BRIDGE only linked in UA Client to the new KEPServerEX 7 migrated, and no more to the old one KEPServerEX 5.8. Now we are testing this migration scenario creating in Kepware 7 BRIDGE an OPC-UA Channel to Kepware 5.8 OLD, but we have some issue when the remote Channel in Kepware 5.8 is it self an OPC-UA driver.In some cases, the tags seems to be unknown and in bad quality, why ?The issue happen also if I try to read the remote TAGs via UAExpert tool To understand/replicate the issue I have done also another example locally, in order to exclude network and OPC-UA configuration, both in

We are currently experiencing a performance issue with our OPC UA communication. We have an application developed in FactoryTalk View SE version 15, which displays several graphical screens that rely on data coming from Kepware 6 through an OPC UA connection.The problem is that the graphical elements take a long time to receive updated information from Kepware. The data refresh rate is significantly slower than expected, causing delays in the visualization of real‑time values.We would like to understand what could be causing this slow performance and what actions we can take to improve the responsiveness of the OPC UA communication. Specifically, we are looking for recommendations to optimize OPC UA settings, data update rates, server load, or any other configuration that could help increase the communication speed between Kepware and FactoryTalk View.

HelloWhere can i download LinkMasterThanks, 

My client has ThingWorx Foundation 9.4.4, Utilities 9.4.0, and Navigate 9.4.2 and want to upgrade to everything to 10.1.  The Utilities 10.1 Help Center upgrade matrix lists 9.5.5 as the minimum version that can be upgraded to 10.1.  Is that truly the case or can I upgrade from 9.4.0?  Or do I need to upgrade to Foundation/Utilities 10.0 then upgrade to Foundation/Utilities 10.1?

Hi Team, Does PTC office worker requires separate license cost? or does it come bundled along with windchill pdmlink module package.

Hi all,   I'm a long time user of Mathcad but first time poster - hoping someone can tell me where I'm going wrong!   I'm having trouble in Prime 11 creating functions that use vectorized multiplication of two vectors, where the values inside one of the vectors was created using the sum operator. When I do the equivalent operation directly within the worksheet (i.e. not within a function it works without error. When I try replacing the sum operator within the function with a value it all works without error.   The error message I get is "This value must be a matrix of scalar elements all of which have the same units"   I've seen a lot of discussion about how this error can come from inappropriate use of ranges when vectors should be used - I've checked using IsArray & IsRange on all the vectors involved and I don't think I have any inadvertent ranges.   Example worksheet showing my issue attached.   If anyone can help tell me where I'm going wrong I'd

Hi @PeterCase , I wanted to report that the latest PTC support articles arrived last Thursday.As of today, they have not arrived for another colleague of mine either.   Thank you    

I have an assembly with two components. Every components has a simplified rep with the same name; UDSR where one feature is excluded. When I create a simplified rep in my assembly, I can select the User Defined Simplified Rep, pick UDSR,  from each component. Works perfect. Now I want to create a rule-based simrep, where every component is loaded with the user defined simrep "udsr" in it.In the rule editor, I am on the Status Tab, selecting Display. Is it possible to search for a user defined simrep with a particular name?   

Version: Windchill 13.0 Use Case: The link below explains how to make custom attributes available in the criteria of an advanced search. However, I have noticed that I have custom attributes available that I can add to the criteria of an advanced search without following the process detailed in the article. https://www.ptc.com/en/support/article/cs180432?_gl=1*cmfofr*_gcl_au*MjAyMjY0MTgwMi4xNzcwNzE2ODM5*_ga*NjYzNjgzODU1LjE3NzA3MTY1MDQ.*_ga_7NMP2MSYPM*czE3NzE0NDE4NjIkbzQwJGcwJHQxNzcxNDQxODcxJGo1MSRsMCRoMA..Description: Can anybody shed light on the circumstances that would require me following the process in the article?

Could someone tell me how to change the icon of a user-defined type? What about the local types, can I change their icons? Thanks.

Hello everyone, I am working with Creo Parametric 12.4.2.0 and I want to export a .dxf file from a drawing, using:File > Save as > Export > DXF I usually use a sketch or a solid from a .prt file and place it in my drawing to do so. This works perfectly fine in Creo 3 and 6. My problem is, that whatever is contained on my drawing, gets turned into a image, when exporting it via Creo12. So if I open the .dxf file in another software, I do not have single splines or curves anymore, I have one big, very blurry, image, as seen on top here:  What have I tried:using a solid part as a baseusing a sketch as a basetrying different dxf versionsdeleting layers for the export checking unit is the same between .prt and .drw export without drawing boarderexport with drawing boarder What I found out:creating the sketch directly in the drawing file returns a clean assembly of lines - but I do not want to re-draw my designs from the .prt. So this is

Hi All, I've created an Industrial Thing with a Kepware connection. I want to create an application where adding and binding properties will be done from code without using Composer.I tried to connect the ready properties with remote bind using the service SetRemotePropertyBindingWithout success.I tried to create a new property using AddPropertyDefinition and it also didn't work. my aspcect json looks like that :{ "industrialDataType": "String", "tagAddress": "DB2000.STRING0.20", "scanRate": 1000, "tagType": "Static", "readOnly": "true" }Where I did something wrong?

Looking to create a service that will copy/move a file from a ThingWorx FileRepositoryThing to a Windchill Product subfolder. This is to be triggered by a service call from a ThingWorx mashup. Where I have seen information is for creating a file related to primary content for a task. This would be in a subfolder under a product. 

We just recently upgraded to Windchill 10.0. Is there anyway to increase the font size in the windows?Thanks!Ted

In  whatt condition or when the following information appears in event log:Allen-Bradley ControlLogix Ethernet  MainLine.DATA_LOGGER | Details. | IP = '<10.3.XX.XX>,1,0:44818', Vendor ID = 1, Product type = 14, Product code = 168, Revision= 30.11, Product name = '1756-L85E/B', Product S/N = 0XE46E97.