Solved

Hi,   i downloaded creo parametric 6 student edition and went through the installation like the description in the pdf. When the installation is finished and I try to run creo, there is the warning that the quality agent is not registered and the program shuts down. I read in forums, where people have the same problem and tried to uninstall everything and install it again but it doesnt work.    Thank you for your help!

Is there any option to get the same behavior as listbox in prime? 

Hello all, One of my co-workers saved some of his drawings to his "A workspace" in Windchill  and exited Creo. He has not checked in any of these parts to windchill. Then he switches workspaces and works on a few other projects in windchill and exits Creo.A few days later, he tries to retrieve drawings from his first project from "A workspace" but finds that a lot of the dimensions in his drawings are missing. He claims he saved the drawings to "A workspace" before he exited Creo. He has no duplicate drawings or copies of any of these drawings anywhere locally or in windchill either. Can anyone help us understand why this happens ? 

I have tried several speed tests, using return and not using return in a function.  It is hard to detect any difference.  Is there any reason to use return for a function that does not have any conditional breaks, that is, executes top to bottom and exits at the bottom? Regards, DS

 

the installation requires a "sale order number or product code". where do I find it?I'm a mentor at the local FRC team

My Mathcad trial is expiring in 3 days, but I have 4 more weeks until I graduate, and I am not done with my Senior capstone project. My group is designing a school building for the Holy Trinity Academy in Adumasa, Ghana. We need mathcad for a couple more weeks.Please Help!!

when evaluating frequency equation for a MDOF model, if the stiffness and mass matrices are defined in terms of mass, elasticity, and etc constants, the resulting terms of the symbolic evaluation are reversed. (see below). I know that the result in terms of the constants is the correct answer. However, I dont understand why the determinant using values only gives reversed terms? Any ideas or pointers are apprieciated. Thanks      

Hi teamWe have created a subtype in the Type and Attribute Management Utility on our Dev server (a subtype of Problem Report with different fields). Now we would like to migrate it to the QA and eventually Prod server. I was hoping to see an Export/Import feature like we have for report templates, but this does not seem to exist.  Do I have to recreate it manually on the next server?thanks -- Rick

Hi guys, I`m a student major in chemistry. Recently, i`m confused this this interpretation, The equation"The method proposed here for determining the kinetic parameters is a multistage procedure. First, the Pearsons linear correlation coefficient between the left-hand side of eq 15 and the reciprocal of temperature is used as the objective functionfor optimization, where n and m are the variable parameters to maximize the objective function. Here, optimization has been performed by means of the maximize function of Mathcad software (Mathsoft inc.). By this optimization procedure, the n  and m parameters that yield the best linear correlation for the plot of the left-hand side of eq 15 versus the reciprocal of temperature are obtained".  The equation is shown below. So I was wondering how can I implement this derivation through Mathcad.   

Good morning ; it is a problem of representation of curves in an X,Y diagram. Before, I was using Mathcad 14 and when you drew a curve in an OX,OY plot, you could show a quadriage (that is to say all the lines // at the graduations of the OX and OY axes). This grid was green, in general. Now, I have not found a way to make this grid appear. Is there a way ? In the online help tutorial, it says to double-click in the plot area to open the Mathcad Chart application; should the chart open in the "chart section"? When I do this, nothing happens. Please tell me how to make this grid appear. Cordially ; Denis Chatrefou----------------------------------------------------------------------- Translated the text from French to English using Google translate on 7th April 2023 at 10:46am IST. Translated by vnamboodheriTitle - Faire apparaitre un quadrillage dans un tracé X,Y Body - Bonjour ; c'est un problème de représentation des courbes dans un diagramme X,Y.Avant j'utilisais Mathcad 14 et lorsq

Hi!I am working on a school project where we are using surface modeling to create a hair dryer suitable for injection molding (We are and have to work in Creo 4.0, just fyi). I decided to go for a more advanced modeling method where I make a boundary blend towards a projection on a complex "pane"/surface (as can be seen in image below). I use a ribbon as a tangent for the boundary blend, I create the ribbon with sketches and curves. The splines in the sketches are tangent to a horizontal center line, while the curves are tangent to axis that are perpendicular to the vertical plane. I do the same for the for the handle (see below).I then merge and thicken this. I use the top-down approach to make the back half referencing the relevant points of the front half. Lastly to my point and my issue, the thicken (even tough all boundary blends uses tangency to ribbons that where created with sketches and curves that are constrained in such a manner that they are perpendicular to the vertic

Hello, We are upgrading very soon from 11.1 >> 12.1.Currently attemptin g to use the approach stated in CS212589 to install and use (one at a time) both WWGM 12.1 and 11.1.Not yet working and CS seems to be wrong and not complete.Looking for input / advice / procedure from any one who has had success on this.Note: The alternative is to have to uninstall / reinstall in order to use.thanks in advance.    

Hi Experts, I have one question about Mathcad 15 integrate function.I want to calculate the area of the blue line, but I don't have any idea how to do it.I have the data for the red curve.  and I want to use this data to calculate equations (1) and Equation (2).Could you please give me some suggestions on it, thanks. Please see my attached file.     

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0(.dge) I get the following error message when I try to open the data'Internal Error (005) occurred. Use the Check Database tool and contact technical support for assistance.'Here are the errors that I faced'Internal Error (005) occurred. Use the Check Database tool and contact technical support for assistance.'

I want to create a curve from datum points. To do this, I have imported the datum points offset as a table and created the curve that way. Now I want to automate this process so that I can re-import the points every time I need them and update the curve automatically. Is it possible to import the points table using PRO/Program?     

Morning all.At my place of work we are running Creo 8.We are still in the early days of setting it up correctly.I want to save the config.pro file on the network so that all our users accounts point to same same location so that we all use the same configs - at the moment they are on peoples C drives. I cant seem to find a way to do this.Can anyone advise please? Thanks.

Can I make a duplicate of a part and have it in the sbom?  Example assembly didn't contain allscrews so I need to add one..   

Hello everyone,  I need a small information from your side. As i am performing modal analysis for my structure. My geometry is very simple made up of granite material. I would like to describe my problem in points, that would be easy to unterstand,  1. Firstly, i did the static analysis of my structure, where the outcome was acceptable. I mean to say the deformation (0.00155mm) and the stress (1.004Mpa) were under the limit.  2. Then i performed the modal analysis of my structure with same constraint and load collector, where i have selected 6 eigen mode. After the analysis I got the E1 (507.741Hz) to E6 (1358.87Hz) value.  3. Can someone explain me how to read the modal analysis results, because at each eigen value the results getting changed. Also, should I consider the deformation and the stress value from the modal analysis? Because compare to the static analysis their values are very high.  I would appreciate if anyone have a look on this concern. Thanks S

Hi Folks, I'm a total newbie to Kepware, so please forgive any mistakes or formatting inadequacies. I have searched the website, but answers to similar questions involve ThingWorx, which I'm not using. I'm using a trial version of KepServerEX 6.13 with the Postman utility to test responses to/from a REST API server configured in the IoT Gateway plugin. What I'm asking concerns the JSON call/response values. The IoT Gateway has a REST API agent pointing to a new read/write tag with the name "Channel1.Device1.Order", which is of type string. I followed the example from ptc.com:  https://www.ptc.com/en/support/article/CS376106 .  Here is my POST request: POST            http://127.0.0.1:39320/iotgateway/write[    {        "id": "Channel1.Device1.Order",        "v": "000000717087"    }]&n

Hello,I have two question about creating views in Creo Illustrate.1.) Is it possible to create a kind of interrupted or collapsed view (or what I shou call it) to push large parts together (example: View1 and View2)?2.) Is it possible to display only a part of a view, so that it is still possible to place position numbers (callouts) on the left and right (example: View3 and View4)? Thanks and greetingsRamon Bean  

How to merge reference BOM Balloons in Creo   

Possibility to change units of flow value. Example: to have pressure in MPa and not in Pa

Hi,  I'm trying to create a sheet metal part like this from 2mm stainless steel, but I'm having problem with the last step which is unbending the part.   I get the troubleshoot message:  "highlighted sharp corners cannot be unbent. Recommended actions: Change the corresponding bend radius to a value greater than zero. If bend is not defined, add an edge bend." I've searched for this problem in the forum but cant find anything similar.  I've tried the following.- checked that the sketches have tangent between lines and curves to not have sharp edges- radius is same in the two sketches to have a consistent bend radius- experimented with using thinner material, different radii of the bends and the circular part and the corner part. longer straight lines in the circular sketch, etc. - tried creating the part in another way by creating a swept blend surface in part modeling and then offsetting the part in sheetmetal. - tried using

in the attached pics you can find the drawing done on another software using for loop, how to implement that on Creo, and is that possible to do using for loop in the parametric drawings?I need to draw this marker on each slot and it should be all the time upward (circle with a line getting from with 90 degrees wrt x-axis) as shown in the pics any help or tips would be so appreciated