Solved

How to hide a tab for change request based on a value. 

I use the Windchill 12.0.2.5 and Oracle Database.  Our Database's Blobs tablespace is filling up quickly. Almost it is filling up 1GB per day. Before 2023, Blobs table isn't filled up like this.  How can I manage or reduce the amount of Blobs table space?   

Hi! I have a problem. I tried to install Mathcad on my friends computer, because i had not Windows computer, only Mac. Now I have bought Windows computer and need to install Mathcad for the university. I started to install that and got an error "you have reached the maximum number of licence requests available for your product type". Can you help me somehow?Thank you

In prior versions of Mathcad, I could create variables such as 'products' shown above. I could then create a variable like rate and assign a value of 100 products/min. Subsequent calculations would then allow me to change the units using the 'product' variable. Per the example above, I need the result of the last operation to be '300 products/min'. Is there a way to do this? It worked perfectly in Mcad 15 fwiw.Thanks

I have a couple questions about ideas that are archived.  Does the person that created the idea get notified?  Does anyone that either comments on it or vote for it get notified?   I happened to be on this forum yesterday when @olivierlp was archiving quite a few ideas and it notified me in the browser.  However, I did not get any emails.  I just might not have voted or commented on any of the ideas that were archived but that got me thinking about my questions.   I was looking back at my emails I received and see I got emails for ideas I did not vote for and did not comment on.  Just wanted to know how the notifications work on archived ideas.

Hello everybody, I have a problem with setting the document Type of a new created Document from a expression Robot Workflow. I managed to create a WTDocument but cant set the subtype type. I found this article, but could not get it to work: https://community.ptc.com/t5/Windchill/How-to-create-subtype-of-WTDocument-by-API/td-p/482345 Thank you for your help.  String name = "Test1234566788"; // Name String number = "12343455677"; // Number String lifeCycleName = "LC_TEST"; // Lifecycle name String container_path = "/wt.inf.container.OrgContainer=Test/wt.inf.library.WTLibrary=Test"; // The container where the document will be created/located String folder_path = "/Default"; // Folder path wt.doc.WTDocument doc = wt.doc.WTDocument.newWTDocument(); doc.setName(name); doc.setNumber(number); /// ----------- TESTAREA ------------------------------- doc.setDocType(wt.doc.DocumentType.toDocumentType("WCTYPE|wt.doc.WTDocument|de.test.TESTDocument")); /// ----------

How to draw a Squircle shaped cylinder in creo.    

The Save As button suddenly went missing from the Windchill UI. Any idea what happens?   

Hi all, Using Creo 4.0  I would like to ask some advice about how you would constrain this (red brownish) U shaped bracket for the shown load situation.  The bracket has 2 holes with a pin in it (so it can rotate). Both holes are loaded with force F/2.Force F is applied on a bolt that is placed in a screwthreaded hole in the bracket. I have modeled the bracket like this:For the pin hole, I use a bearing load with force F/2. I use a displacement constrain to implement symmetry on the cutting surface: I use a surface region to constrain in the axial direction of the screw hole. (cylindrical CS). This model calculates fine, but as can be expected, I have a stress peak at the side of the surface region.Not sure if that is entirely realistic. A slightly different approach is to exchange the screw hole by an 'embedded' bolt, and constrain the tip of the 'bolt': This results in a (lower) stress peak at the indicated spot below. Perhaps a

This has been some great help in this thread!! On a path moving from 11.1 to 12.1.2. Where have you all downloaded OpenDJ installers from?  

I am using Creo Parametric Release 7.0 and Datecode7.0.9.0Not able to checkin the fileHere are the errors that I facedThe value of "Type Definition Reference" cannot be set to null, since it is a "required" attribute.

Hi,I often encounter "circular references" problems,although it can be laid aside because often this problem doesn't has fatal dangerous to my models,but the notification looks uncomfortable to me. But when I take a deep insight into this problem,I always failed to find which dependency relation is the cause,when I click to open the notification center,I only see the root node listed below "circular references(1)". So I want to ask for a method to troubleshoot this problem or any modeling principle to avoid this problem? thanks a lot.  

I have a service to get live property values. How can i create an alert on this service when the values increases on a threshold.  

Hello! I would like to add some WTPart IBAs to the WTPart Where Used table. I have tried creating a new table builder and extending the WhereUsedTreeBuilder but no matter what I try, the table stays the same and the columns I added via the table config in code are not displayed.Is it even possible to extend this table or am I doing something wrong? Best regards

HelloI want to know if its possible to select fictive line on 2d surface: generated with divised line ?Config option?It is only possible by copying a part of the surface With 3d curve and variable sweep its possible because creo generate a isoparam    Thank you      

Hii,     I am facing another error regarding the unit.It shows that the units are not compatible. What it means and how to solve this?Regards Arun 

My license for the student version of creo 9 expired and I've tried deleting everything and reinstalling with a new account and it still says license expired. In the error message when I click renew license and put in my information it says "Customer not verified".  

Is it possible to cancell my existing Mathcad subscription?   

Hi Team,I need to create alert for my Thingworx application which will be generated if the native communication between Kepware and Thingworx is down, In my  case Kepware is up and showing Good values but due to some reason Thingworx side Kepware connection ( Industrial Connection) is showing "isConnected" property value as false and last connection was 3 days before. So need to develop some alerts which can automatically notify client whenever such incident occurs in future. Thanks and Regards,Sid

HI ,   I have installed thingworx on windows machine connecting to Azure SQL. I get below error in scrrenshot. Upon checking through the KB i didn't linsence file gnereated . I see F:\ThingworxPlatform\licenseRequestFile.txt . Can you please help set up .   Below are the error in Application log file  License has not been installed   Close 2023-03-31 17:57:13.927+0000 [L: WARN] [O: c.t.s.s.p.PlatformSubsystem] [I: ] [U: SuperUser] [S: ] [P: ] [T: metrics-SystemMetricsLogReporter-1-thread-1] ThingworxPersistenceProvider.ConnectionPool: BusyConnections= 0, IdleConnections= 5, MaxConnections= 100, ThreadsAwaitingCheckout= 0, TotalConnections= 52023-03-31 18:02:09.867+0000 [L: ERROR] [O: c.t.w.Subsystems] [I: ] [U: Administrator] [S: ] [P: ] [T: http-nio-8080-exec-3] Unable to Invoke Service GetCurrentLicenseFeatureInfo on LicensingSubsystem : No license installed2023-03-31 18:02:09.867+0000 [L: WARN] [O: c.t.w.BaseService] [I: ] [U: Administrator] [S: ] [P: ] [T: h

I have some suppressed features in part model. I want to enable that suppressed features in assembly level. (Like simp rep). Is possible to do in part level simp rep? or other option.But I don't want to create an instance.        

These options are too short, not a complete word, and the PTC help document has no relevant explanation, I don’t know what they mean, can anyone tell me, thank you! I hope that the PTC help documentation can add explanations for all these options and sub-options. 

for an existing drawing view, i want to change its rotation of that view .   For the existing drawing sheet I want to do modification in its view orientation ,but rest over dimensions will remain unchanged (should remain same). only there shouldbe a change in view rotation & no need add or giving dimensions again from beginning.Is there any tool or feature to perform this activity ?(actually i am making a assembly drawing of a model) Plz kindly reply to this …..  

Hi, I was wondering if it is possible to use your own security certificates with KepServerEx for OPC UA communication. I've seen that there is an option to import certificates in the Instance Certificates section of the OPC UA Configuration Manager. Is there any information on the requirements for using your own certificates? I also saw that there was a Certificate Store tab in the settings for KepServerEx. Is this for use specifically for ThingWorx?     

I have a report that I am implementing a look back parameter, show me how many documents were released in the past X number of hours. I am using the database function System Date in my query builder but it seems to be reporting the system time 4 hours off. If its 1pm, the time displays as 9am, the timezone is correct as EDT. I can confirm that the reported time from the OS and Database using straight SQL queries is correct as is the reported timestamps of objects. This obviously throws off calculations in hours back since it is using this incorrect time in timestamp subtractions. I have seen previous posts related to this but its almost as if Windchill is applying the timezone offset twice. I've accounted for this by adding 4 hours to that time in my calculations but I should not have to do this. Thoughts?