Solved

Hello. Our school (Pusan National University) will conduct an industry-academic project (subject: transformation of production site using AR solution) with Volvo, and I think I will use the Vuforia program. Can I get a license for students?

Is there any basic training available for for S1000D?    

I filled out the student free software form for Creo and don't know where to find a license number?I downloaded Creo and when installing it prompts me to enter my license number, but I don't know where to find it.     

Hey!  Whenever I try to open the symbol gallery I get the following message from Creo (see screenshot below). After I hit OK the program just simply crashes. I am running Creo 9.0 Student Edition. Has anyone experienced the same issue before? Thanks for your help in advance!    

Working with imports and exports of 3D models, I believe that it is not constant mathematics since it will depend a lot on the model and the source software, but I would argue that it is necessary to have a base of best practices for thisDoes anyone have any kind of document on best practices for importing and exporting 3D models in Creo?  

We become indebted to. I work for Kanzaki Kokyukoki Mfg. Co., Ltd. This is the content that I consulted with Mr. Matsuda of PTC Japan Co., Ltd. in advance.He will get back to you with more details. Currently, we are trying to load the Creo7.0.8.0 model into Altair's Simlab analysis software. However, when I try to read it, the model is not displayed even though the completion message is displayed on Simlab. Creo 2.0, which we used before the upgrade, could read Simlab, but after the upgrade, it is no longer possible to read Simlab. We shared this situation with Altair and confirmed the countermeasures, but we have not received a clear answer yet. I would like to ask you a question, so I made an inquiry. I tried to send the model created with Creo 2.0 and the model created with Creo 7.0, but it could not be attached due to a system error. very sorry.Configuration files, etc. (Please let us know which files to send.) If you have any necessary data, please let us know. If you have any que

I'm trying to fetch data from PostgreSQL database. Query, select entry_timestamp + interval '30 minutes' as offset_timestamp, entry_timestamp from sensor_data I'm trying to pass 30 minutes from Thingworx input. select entry_timestamp + interval '<dynamic>' as offset_timestamp, entry_timestamp from sensor_data How to do that?

I recently went from Mathcad Prime version 5 to 8, and now I often see errors like "This variable is undefined", where a variable seems to be undefined.However, if I put the Symbolic Evaluation arrow in the line with the definition of f(t) in the first line, the "This variable is undefined" error disappears, and I can plot the function and so on.Can anyone please tell me what is going on? I teach engineering math, and my students are getting more and more frustrated about Mathcad Prime    

Hello everyone, I would like to make a drawing for a sheet metal part. I got a step file which I have converted into a sheet metal part (function: Model - Operations - Convert to sheet metal part). This worked fine. See attachements "Step_File" and "Bent_Sheet_Metal". I left it so far in the state "unwind". When I create a 2D drawing from this model I would like to insert the unwinded sheet metal and the bent one. Its not important to have it on one sheet so it can be two sheets seperated (example: 1st.sheet: unwind sheet metal and 2nd.sheet bent sheet metal) To insert the unwinded sheet metal its no problem. As soon as I bent the sheet metal to its final form (like in picture "Step_File") the drawing updates itself (of course) and the part is bent again.  I searched for the problem and found this post but I dont fully understand the steps. Maybe its not even showing my problem. In my point of view its at least near to it. Can someone show me how to insert

Hi teamtl;dr this is what you see if the Oracle server did not get started.  crisis over .. We did a VM rollback to a snapshot. Now, starting Windchill, ServerManager gets stuck and the last log entry is :INFO [main] wt.system.err - INFO: Creating serialization filter from !bsh.XThis;!bsh.Interpreter;......... No MethodServers get started. Windchill is not using any CPU and very little memory.Oracle docs tell me: The Java serialization filtering mechanism screens incoming streams of serialized objects to help improve security and robustness. Filters can validate incoming ... What is happening here?  How can I get Windchill started again?

Hi Developers, I have a Navigation function where target mashup is dynamically binded and is coming from previous mashup.Now i need to send few parameters to target mashup but since it is dynamically binded, mashup parameter of target mashup won't appear.Kindly suggest.  Also use of Session parameter cannot be used here.Thanks In Advance.  

Dear, How to prepare the nozzle reinforcing pad in creo (refer the attached sketch) dimensionsShell OD - 3000mm x 12 thknozzle od -  1067 mm x 12 thkR.F pad OD - 2000 x 12 thk please provide the step procedure Regards,Robert   

Hello. We've packaged Vuforia Studio 9.9 into a .msi and intent to deploy it to student labs, for which we need the silent switch to go in to the install command. Can someone assist please.    

dear all  expert .  please help me  ,  how to automatic mail sent event how to implement steps please , i go through schedule but not clear , how to test and implement automatic sent mail event , i need script .thank you    

Hi everyone, I have just started to learn Thing Worx from its documentation section which is good resources but it take a lot of time to understand simple thing as well so can someone of please tell me some good video resources or tutorial from where I can learnt it fast and also can you share some project idea which I can do as a beginner please help me to groom  Thanks all.       

Is there a known explanation for the next? I would think that the resulting units should be the same, but apparently not.This was with Prime 7.

When i try to log into Creo, it says that "Kunde nicht verifiziert" which translates to that i am not verified.

I have a very simple problem as you can see below (file attached too.) I'd like to fit a line to measured data. There's something fundamental about minimize (and solving in general) that I don't understand and can't seem to find by searching through the literature. Changing TOL and CTOL have no effect. Help?  

Is there a way to "read" the *.ui file to understand what UI customization is applied? Unlike config.pro that can be edit/read via text editor, the *.ui file could not be read/edit via text editor like notepad Basically, what i am trying to achieve is to "read" the customization that is applied via the *.ui file  

Two questions. When the Designate box for a parameter is checked, it would mean that the parameter is visible in a PDM system. I understand this, but it doesn't apply to me as I don't use a PDM software. The second purpose, according to CREO Fundamentals, is (and I quote) to "make the part level feature or geometry level designated parameters appear as a component in an assembly BOM".I'm not sure what this is supposed to mean, because I believe this implies that you can't use undesignated parameters in a BOM table? Which can't be true, because I definitely have undesignated parameters linked in tables (in drawings for instance). Could someone shed some light on this? And lastly, what advantages are there to NOT designate a parameter?

How do I get Mathcad Prime to give me colored coded results. If the result is Pass, return color in Green and if fails, Red? Please help  

When using Submatrix, is there a shortcut to specify the end of the column or end of the row?    

files created with MCAD 14 or MCAD 15 can be opened in MCAD 14, saved and re-opened in MCAD 15? 

I've got an OTK JAVA Free app working to create simplified reps with a method as shown below. I cannot get Creo to show any components in this simplified rep.The method should accept inputs as a Solid (the assembly that the simp rep is to be a member of), an integer sequence (I only want to show a single component, so only the index 0 is used) and an integer (only used for messages, denotes it's location in a sequence). The method should create a new simp rep with the default action to exclude all components, which it does successfully. It should then add the component with the feature number that is index 0 in the integer sequence as a master rep. This does not happen. So my question is, what should I do to the below code to make the component identified in the "is" integer sequence as index 0 appear as a master rep in the simp rep called leafsimp? At the moment I just get a simp rep with all components excluded. In the below, printMsg is a method that just calls System

Hello,I am stuck and need suggestions what to do. I am trying to get CSRF_NONCE value, using rest query with java api (I working with Windchill 12.0 server). But what ever I do I get HTTP code 400.Tried queries were: https://myServer/Windchill/servlet/odata/PTC/GetCSRFToken()My code is:URL url = new URL ("https://myServer/Windchill/servlet/odata/PTC/GetCSRFToken()"); HttpURLConnection conn = (HttpURLConnection) obj.openConnection(); conn.setRequestMethod("GET"); conn.setRequestProperty("Content-Type", "application/json"); conn.setRequestProperty("Authorization", "Basic " + authString); //authstring is Base64 encoded conn.connect(); BufferedReader in = new BufferedReader(new InputStreamReader(conn.getInputStream())); String inputLine; StringBuffer response = new StringBuffer(); while ((inputLine = in.readLine()) != null) { response.append(inputLine); } in.close(); conn.disconnect();------------I am pretty sure that code is ok because if I try query "https://myServer/Windchill//servlet/