CAD

Hi,referring the article CS392162, I'm not able to edit the name of the folders. In my example I need to add the mechanica beams and I want to maintain the original ones.I already create the folder structure, as you can see in the image attached:- simulate    - steel_beams_mm_mechanica    - steel_beams_inch_mechanica I want to change the label of the folders:- SIMULATE    - MECHANICA MM    - MECHANICA INCH I need it in two different languages, english and another one. Thanks in advance

Have you ever encountered such a situation: In Creo3.0, when editing parameter properties, I wanted to define a drop-down value list for the parameters, but I found that I couldn't click the Define TAB in the Edit Properties dialog box. However, this issue does not exist in Creo4.0 or later versions.

I am just trying to get my solve block to work. I wonder if I am inputting anything wrong. I know what the answer should be; it's a very simple calculation. However, I just want to get my solve block working. Attached sheet. Error on the last page.  sheet attached. 

Hi,We have a particular case.We have 2 hole pattern on different diameters with the same Common Zone.- 1st pattern is 6xM6 on Ø210- 2nd pattern is 6xØ9 on Ø224Currently, the dimensions are defined as follows:We have manually defined the dims as follow:For the second arrow, we add a leader note at the height of the 6xM8 on Ø210 text note Could we make it more properly without "manual tinkering" in MBD?Regards

Are combined state descriptions available in Creo View and Is it possible to add a column to the Viewables tab to display them? 

I am trying to create a solve block to calculate the value of alpha as per the below equations:I have never used solved blocks before so hitting a bit of a stumbling point. I have found through manual iteration my required value of alpha as below:I am trying to put this together into a solve block, but not sure where I am going wrong:  I've attached the sheet pictured above also.Any help much appreciated, thank you. This will probably be a very simple solve and it is just my lack of understanding of the program hindering me!

I installed product with a license. In your instruction I just shall import the zip with licenses but mathcad want to have a product code.Shall unpack zip and make a .lic file by only use text from START: License File for HOST---#END OF THE LICENSE PACK FOR REQUESTBut I have two one im... and one im...Standard.

When I try to export a mathcad worksheet to PDF file, all the green (no error) boxes are also getting exported. Is there any way to hide then or switch it off when I export from mcdx. to pdf.? It`s a bit annoying when any of my clients see it that way with green boxes rounded off at random places.

Consider that, I have a data based upon the below image and I`d like to integrate that data with Creo so that I could sync up both. Now, "Number of Active Coils: Nc:=1" is assigned as input and the "Diameter of the wire: dw:=1mm" is taken as output. The issue I`m getting is that, I`m able to change the value of output as many time possible, but once if I assign a value as an input, it indirectly gets locked... Changing that value is impossible. What could be the reason for this? Am I missing something, or is there something wrong with the settings of my workstation..? Please clarify.- Srikar  

I applied for and received a license file because I was on my fourth PC, and the license only allows for 3 installations. I erroneously included the wrong disk volume ID. The correct disk volume ID is C272-D1C7 (for reference, the incorrect disk volume ID I provided earlier was 2A39-8A1A). I would very much appreciate it if I could receive a corrected license file for the correct disk volume ID. (Oh, and very sorry for the problem I have caused!) Thanks!

I am having issues trying to open a UDF from a folder in our Windchill library.I get this error:'wtpub://PDM-PD/Libraries/COMMON CAD/CAD Documents/user defined features/90-4118-795-000' does not exist in the database.Caught exception: com.ptc.wfc.Implementation.pfcExceptions$XToolkitGeneralError When I dig into the log, it looks like it is failing here:Exception of type com.ptc.wfc.Implementation.pfcExceptions$XToolkitNotFoundXPFC Message: pfcExceptions::XToolkitNotFound...at com.ptc.wfc.Implementation.WFCRemoteCommImpl.makeObject line: 5453 If I put the UDF "90-4118-795-000" into my working directory, it executes fine and places the UDF as expected. I have tried to retrieve the UDF in a sandbox code and get the same error, so it seems it is related to .gph files?I can retrieve .prt files fine, so I am looking for any ideas on how to resolve this issue.

I'm working with my IT dept to try and install Creo View en masse and they are asking for a .msi file. Is there a way too get one? The default download on PTC Support is just the .exe in a ZIP. Has anyone done a mass install of Creo View? Any recommendations for tackling this?  Trying to install V11.1

An issue was brought up last week by 2 of our users wanting to work with skeleton models. Users were reporting "Assembly license is required to use this functionality.", this was showing when trying to populate their assembly without existing skeletons. After further investigation I noticed all features of the AAX module are missing. We're not sure when this started, but has anyone noticed similar behavior?  Creo+ V12.2.0.0-020Windchill+ V12.1.2.12

What is the best way to find a dimension within a family table? Is there some sort of search function that can filter through the family table? For example, if I just have a dimension 'd160', what is the fastest way to find it in a large family table. 

Hello!I am trying to add a M7 ISO thread to my 3D piece but it has the wrong size. It's way tinier as what it schould be. The sizes are wrong for every ISO thread, and doesn't disappear after restarting Creo, or by creating new pieces.Im am Using Creo 8.0.4.0, and I believe the problem came once I changed the language.Thank you for your help and your time.

Hi everyone, I'm working on automating a process using a batch file that will be triggered as a scheduled task. The steps I'm trying to automate are as follows: 1- Launch Creo Parametric (version 10.0.7.0)2- Start a tool that interacts with Creo to run it automatically in the background.3- Shut down the configurator.4- Shut down Creo itself. Parts 2 and 3 are not a problem: this tool was developed by our consultants using the Creo toolkit. It's simply a matter of invoking one batch file to start it and another to stop it. The issue is with the shutdown of Creo. I don't want to use a brute-force taskkill command to close Creo, as I'd prefer a more graceful and proper way to do it. I considered simulating keyboard shortcuts (such as Alt+F+X) to close the program, using either VBScript or AutoHotkey, but here's the catch: since this task will be running as a scheduled task, with no user logged in, none of these solutions will work because they require the UI to be accessibl

I am using Creo 11.0 I have multiple Simp Rep in assembly for example S1, S2, S3 and S5. Now I am assemble one more part and create one more sim rep S6. So, S6's part automatically added in all existing representation. Now my problem is that how can I exclude S6's part from all existing easily.  Thanks in advance. 

Hi Folks,Using Creo 7.0.8.0In the 'Shape' sub-tab of the 'hole' modeling feature ribbon, I recall the graphic used to show the tap-drill depth. I don't see this anymore. Nonetheless, is there a way to add drill depth to the note callout properly? This is omitted and only tap-depth is shown. Thank you. 

Is there a way to change the license server for an existing Mathcad Prime installation without using the GUI within Mathcad? I haven't found anything besides changing the XML file for silent installs, but that's only for before it is installed. I'm able to achieve this for PTC Creo by changing a line in the parametric.psf file and would like to do something similar for Mathcad. Using various versions of Mathcad- 9, 10 and 11.

how creo 7 works in thermal analisys in a steady state ? I mean as input for thermal load i've to consider Heat Flux (W/m^2). This means that load is time dependent. I use a load of 5000W/m^ 2 on a steel structure with 30mm thicknes and i get more than 170°c of temperature. Teoric calculation give me 21 °c after 20 seconds.Does creo consider Fourier time to get Steady State: t= Thickness^2/(Thermal Diffusivity) ? and if it consider that how does it calculate that. Because in material specification ther is not thermal diffusivity value.thanks for answering

We run numerous versions of Creo (7, 10, & 11) to support various clients. The whole mapkey.pro change that PTC has made in Creo 11 has wrecked our config.pro system setup. We have a somewhat complicated setup, so without getting into that I will just explain exactly what I want to try to accomplish. I need to take the users config.pro files and separate them into 2 files; a config.pro with no mapkeys in it, and a mapkey.pro file. I need prior Creo 11 versions (specifically 7 & 10) to load the users mapkeys.pro file from the startin dir. Does anyone know a way I can achieve this? My goal is to keep all of the config.pro files neutral across all versions. I do not want to manage separate user config files for every version, this creates a admi file management nightmare for the way we have our system settings in place.

I am trying to calculate the Jacobian (for a Newton Raphson scheme). At this point the problem is simple enough that I can derive it by hand but I want to make sure the two approaches agree (especially since my hand-derived result is nearly singular). What I am doing is not working - I get a "pattern match" error. Worksheet (in MC11) is attached. Thanks for any suggestions.

I have change device and it seams that i can't download mathcad express. please i'd like some help.Thank you very much.

I purchased a student license for mathcad prime, but when I download my activation file and activate prime 11, even if the license manager says to be activated successfully, the program opens with the express version and says the release is not supported, version 10.0.1 works well.  

My company has been using family tables for fasteners for quite a while and we want to try to use intelligent fastener. All the family tables are stored in Windchill. Is there a way we can use those pre-existing models/family tables with IFX without causing issues across our assemblies?