Mathcad

Since it is no longer possible to install MATHCAD 15 on  my new PC, even though I have a perpetual license, I am looking for a software that is up to its standard. I was offered MAPLE FOLW...What do you think?  

I have a question >> What it is the difference when mathcad write the unit of a resulte inside the brackets [result*Unit] and outside [result]* unit?is there any difference ? and how to make all units showed the same way?Thanks in advanceYusra 

Few Suggestions1. Custom page size not available. This is important because for display of the final output for custom size cell device or iPad etc a teacher need that.2. Certain drawing elements are not available like arrows, rectangle, circles, line, dotted line, etc which are necessary for final formatting of the document. These elements are needed to highlight the certain area which is more important.3. Two files cannot be displayed separately, like I am working on file and looking at some other file at 2nd extended display.4. Certain fonts are not available, although installed in the computer like Aptos.5. Step by Step approach is not available, I am sure if this is provided in the software this will greatly enhance the market growth especially the university students and teachers.6. Math cannot be inserted in text box. This can have advantage since the problem or numerical which have text and math together is certain need of a teacher where he need to change the value of a certai

I would like to reinstall Mathcad 14.0 M020 on Windows XP in Oracle VirtualBox.During the installation I first enter the product code: JW140906EA7617-V4WC-W9DPWhen starting, Mathcad wants to have a licence file.When I select the existing file, I get an OK at first.But when I start Mathcad again I get:The licence you have requested contains an errer.When I try to activate Mathcad directly over the Internet I get:The remote server returned an error: (403) Forbidden.Can you please help me.and send a new licence file.

How the variable vector can be plotted on 2D xy plot    

Hello guys, I'm new into Mathcad Prime and this community, so please bear with me. I'm trying to make a template to solve systems of linear equations with the Gaussion Elimination method. I would like to know, if anyone in this community has a template to solve any kind equation systems with Gaussian Elimination? I have attached a file with a system of equations, that I would like to solve with such template. Thank you! PS: I use Mathcad Prime 3.1

Hello everyone,in the attached file, i am not understanding how the program r2 iterates.Could someone please explain why I am receiving the same options multiple times in the output.Attached Mathcad 10 sheet. 

Hi I would like to solve a differential equation for a set of variables. I hope I have clarified my problem in the attached file (prime 7), otherwise just let me know.   All help is very appreciated! Thank you 🙂

I have 15 executable MathCad Prime 8 calculations that I’d like to run from a Windows Command batch file. How do I do this?

HiIs there a function in MathCad Prime (latest version or 9) where you can put a form field in formulas? I'll give an example:Variable = [form field] mm This is because I've noticed that when I make spreadsheets and make different calculation formulas, e.g.: k = x mm * y mmso often someone accidentally removes the units, and it then completely messes up all the calculations. So I'm looking for something similar to Excel, where each value is in its own cell. If there was a form field in the formula, other parts wouldn't be easily editable.

I need a license file update for MathCad 14 M020.

Need MathCad 14 m020 license file for re-installation after computer crash and Win11 reinstallation.

Hi,I purchased a MathCAD license for MathCAD prime.I have an account, a customer number, a sales order number and a site number.In addition, when I download a summary of my license, I get a zip file with a customer number and a 13 character number.But when I need to install the license, I need to register a 14 character code + 4 +4 code.Where or how can I get the "product code" or a license file?Regards 

I have an iteration in a calculation that requires I select “Calculate” repeatedly until two numbers are relatively equal. Is there a way to automate this iteration so that I only need to select “Calculate” once?

I ran the same program in mathcad14 and mathcad prime10 through a converter, and it was slower in prime. Below is a program that seems to take a long time to calculate. I also got the following information: "The most efficient way to use computer memory when using matrices is to pre-allocate the matrix. To do this, assign 0 to the last element of the matrix. This ensures that there is enough memory for the remaining elements of the matrix. If you dynamically allocate a matrix by filling in the elements of the matrix from the smallest subscript to the largest subscript, it will take longer to calculate and the worksheet will calculate slower." But I don't know how to improve it. Can someone tell me?   Translated by the moderation using Google Translate -----------------------------------------------------------------------------------------------   mathcad14とコンバーターを通した同じプログラムをmathcad prime10で動作させたところ、primeのほうが遅いです。計算に時間がかかると思われるプログラムを以下に示します。 また私は次の情報を得ました。 「行列を使用するときにコンピュータの

Hello, I would like to get some help from you in order to be able to calculate the output voltage of an integrator OPAMP considering also its saturation.As it could be seen in my example that I attached, the output voltage will start decreasing from 0V with a negative slope, proportional with time. The negative supply of the OPAMP is -6V, so I would like to know if you could tell me please how can I upgrade my calculation formula with some logic in order to check if the output voltage is still less than -6V, then it should be calculated according to the formula, otherwise it means that the OPAMP is saturated and the output is staying at -6V? Thank you in advance! 

Hi everyone,I’m new to Mathcad Prime and have no prior experience with it. I’m currently looking for teaching materials or tutorials related to power supply design using Mathcad Prime.Could anyone share resources, examples, or websites to help me get started? I’d also appreciate suggestions on where to begin learning the basics of Mathcad Prime.Thank you so much for your help!

Hi there , I'm trying to find the q values that correspond to levels values . Knowing that q was measured from z which include the levels values as well . like the example Thanks in advance 

MathCAD Prime 7.0 is where my company is still stuck at, but it still has the very frustrating limitation/bug of not accepting decimal numbers without putting a leading zero before the decimal. It allows you to do this when calculating a number, but not when using units. Has this been fixed in subsequent versions?  It is frustrating not only from the standpoint that I never put leading zeros before a decimal, and never have, never do on any other program/software, and it's not a problem at any other time on any other software package I use (including MathCAD Prime 7.0) UNTIL I try to use units in the calculation. I have hundreds of worksheets where I have not used leading zeros and it used to calculate everything just fine, even with the use of units.

I'm using MathCAD Prime 10.0.1.0 and having difficulty having a function complete a different formula depending on if a previous variable is either "Yes", "No" or "Blank".  The loop is meant to repeatedly calculate "b" and then determine if "b" is either a "yes" or "no", I added a blank option to allow the calculation to be skipped in a larger document if that section is left blank. However, it is just always registering the "b" variable as "blank".The answers need to be provided in a matrices format.  

I need to open my Mathcad 15 files. I can't do it with Mathcad Express. Is there a way to work with existing Masthcad 15 documents.

Hi  I want to plot numbers from a table along with a function. But - if I select for example Row 2 and Class C, I want NaN to appear, i.e no value at all in the plot. Is it possible to incorporate NaN in a table? Or is NaN not applicable in this case? How can I solve this?   Worksheet attached (prime 7). Thanks in advance!         

The latest version of Mathcad is 10 but my company uses version 8. So will it be possible for me to download the 8th version of mathcad.

working on a table with a long list of items. need to query the table to see if an item is listed without erroring out every time.   how can I check to see if "Black" is on the list and return a "N/A" or something I can use? Any help will be appreciated.  Ed.

I get this message when i try to configurate my floating license "Failed to configure license for PTC Mathcad Prime 10.0.0.0: '.', hexadecimal value 0x00, is an invalid character. Line 6, position 1" and i dont know what to do? It does not matter what i type, i just comes with that message