Solved

Thingworx 9.0.4 I have a mashup that retrieves data via a service. The data is then bound to a contained mashup with the appropriate datashape for the mashup property. This mashup has a line chart and the mashup data property is bound to this line chart. The data is displayed without issue but the legend will not appear. I have ensured the "hide legend" checkbox is unchecked. When I did not have the contained mashup, I believe the legend was working.  

Hi,Why I cannot do like f2(x,y,z) as we can see the derivative result is depending on all 3 variables x, y, and z? Should be like that for f2? Prime 10

i Mathcad experts,I have some questions about Mathcad function. I don’t have any useful idea to solve my issues.I have one equation, and I can draw the curve of this equation.And then I try to solve the peak value of curve (fig.1) by using the method in EX2.Below are my questions.1.Any method I can solve this equation to get the fn_Y2, please see EX1?2.How do I use solve function to get the fn_Y2, if I have different inputs Q2 at the same time (please see EX3).  I can do this when I only have one input, please see EX2.3.If the issue 2 can be solved, and then I would try to input the fn_Y2 to get the peak value . Also I would like to draw the relationship of Q and peak value, please see the fig.2 (this fig is from TI’s datasheet), could you please give me some suggestions.

Hello team, I use .cgm files created in IsoDraw. These graphics contain vector elements and text.When I publish the file containing these .cgm graphics, they appear in raster format and the text becomes unsearchable.Are there any settings I need to change to fix this? Thanks and regardsPavan

Hi,I have soft attributes defined on the WTPart and I would like to retrieve their values. But going through REST Guides and browsing and searching through PTC support site I did not fine single example how to accomplish that. Am I missing something or REST query cannot be used to retrieve soft type attributes? Does any body have any suggestion?

I have CWC 9.5.0 installed. How to do customization of Thingworx CWC 9.5.0.I have checked https://support.ptc.com/help/thingworx_apps/r8.5/en/index.html#page/thingworx_apps/ThingWorxAppsCust/customizing_the_thingworx_apps.html.But this was not useful. because [PTC.Factory.C_LaunchPointConfigurationThing] this entity is not found on composer.

Hello Community,I am sending jsonData which is my input parameter of the service from my mashup and it goes like this in the picture below. I am unable to read it in the service. I know the methods JSON.parse and JSON.stringify but still i am not getting it. I am unable to read the data. why its converting the json in this format.  I dont why my json is getting converted with double serialization with extra back slashes.   Single Serialization: When you serialize a JSON object, it should be converted to a JSON string with necessary escape characters.Double Serialization: If the JSON string is serialized again or if escape characters are added improperly, it results in a string with extra backslashes. my json in mashup. its hardcoded i have written.  

Hi!I have a problem related to escalation module in CB.I have created the rules for escalation in one of my trackers but haven't added specific rules for preventing triggering of some cases. Therefore I have accidentally created escalation for items that are OK from the process perspective. I need to erase this escalations for those items - how to do that?

Hi,can anyone tell me which standard 2553 complies with the Creo welding symbol library?Could it be ISO 2553:1992?Thank youI'm using Creo 9.0.8.0

Hi everyone,   I have a problem with interpolating data in Mathcad. Please see the attached file. In Excel, I have defined materials and temperatures. I want to replicate this in Mathcad so that when I select the material and temperature, the corresponding stress value is automatically displayed. Additionally, for temperatures ranging from 100 to 250, if I select a temperature like 120, the stress value should be determined through interpolation based on the material and temperature.   I have also attached my Mathcad file. I approached this in two ways: The first method works for standard temperatures like 100 and 150 but shows an error if I select a temperature like 120 that is not explicitly defined. The second method involves interpolation but only for one material. If I have multiple materials, I have to repeat the process for each one.   If anyone has encountered and solved this issue before, please let me know.   note - these materials and temperatures ar

Mount a folder to the new root folder of the replica fails with the following error message:Create mount for root folder "vault1" failed. Nested exception is: wt.util.WTException: Creation of subfolder below root folder "vault1" failed. A physical folder corresponding to the root folder mount path "C:\vault\vault1" does not exist.The following error messages are thrown in methodserver.log:ERROR : wt.wrmf wcadmin - Message: Resource bundle/Message key = wt.wrmf.delivery.deliveryResource/18(wt.wrmf.delivery.deliveryResource/18) wt.wrmf.delivery.WTDeliveryException: Can not invoke the method "addRemoteAutoFolder" declared in class "wt.fv.replica.StandardReplicaService".at wt.wrmf.delivery.StandardReceiverService.returnExecutionAlert(StandardReceiverService.java:862)at wt.wrmf.delivery.StandardReceiverService.executeMethod(StandardReceiverService.java:630)at wt.wrmf.delivery.StandardReceiverService.processActionShippingItem(StandardReceiverService.java:1120)at wt.wrmf.delivery.StandardRece

Version: Windchill 11.1 Use Case: Trying to migrate existing ECN system to Windchill. We are currently storing PDF's of the engineering change notices in windchill. Wanting to move to a windchill workflow process but would like to keep the same numbering formate.Description: Is it possible to configure Windchill so the Engineering Change Notice identity / ECN number is something like M-2369 instead of 00001? 

Hi, Setting up an ODBC client for the first time here. When I use fixed table Kepware throws an error after the setup saying "Kepware is unable automictically generate tags" . When I go to manually create the tags I'm not sure what to put in the Address section of the Data Properties, as there are no hints available/populated.  Thanks

Hi,I am new with mathcad, Could somebody help solve problem. Why temperature value is marked red color?

Version: Windchill 11.1 Use Case: I would like to reorder the Target Promotion state in the drop down list being shown for a New Promotion Request to match the order in the Life Cycle Template.Description: I have added custom states to our windchill install.This is the order of the states in the life cycle templateThis is the order they are showing up in the New Promotion Request drop down listHow do you change the order in the drop down list to match the Life Cycle Template?I would like the drop down list to read as the following: In DevelopmentProvenReleasedObsolete Thanks for any help you may provide,Don A

Hello everyone  I worked on MathCad 13 for years, but recently switched to MathCad 14. Generally, both versions are very similar, but it turned out that I have a problem - MathCad 14 is not able to solve some equations using the "solve" function, which version 13 solved. After a few seconds of "struggle", an error message appears, as in the attached graphic. In turn, in cases where version 14 solves equations created in version 13, it does it very slowly - in version 13 they were solved immediately after opening the file, and in version 14 you have to wait a long time, even about 10 seconds. What is the problem and how to solve it? I would like to mention that I cannot return to version 13, which I would like to do. Thanks

Dear fellow Windchill colleagues,Regarding sub-types of WT.part and how to change a existing part from one sub-type to another, i can find some =/-10 year old posts on how to do that using SQL or command line scripting.But whats the status on it on 2024? Is it now somehow possible via, the interface or maybe the REST-API? Some context regarding our story:We would love to use multiple sub-types, but we are currently are avoiding it like the plague, because it seems it's not easily changeable in the Windchill interface.The reason we would like to change them is to make it easier to implement them. We come from a 'CAD centric' way-of-work and currently don't have any data that would define in which sub-type a certain part should be (e.g. Mechanical/Electrical/Manufacturer). When starting with WT-Parts, we can create a WT-part for each CAD file, but then directly have to choose a CORRECT Sub-type. That information we would like to get over the next couple months or years, while we wor

In mathCAD prime 10, how to do element product in two column vectors? For example, A := [1 2 3]B :=[4 5 6] I want to have C=[4 10 18]. In this case, how can I express it in mathCAD?Please help me!

Dear community, We upgraded from Thingworx 9.3.13 to 9.5.2 which mostly worked OK. After restart I am encountering this message in ApplicationLog:[SECURITY AUDIT Anonymous:@unknown -> /ExampleApplication/org.owasp.esapi.reference.validation.StringValidationRule] Input validation excludes canonicalization. Context: setHeader Input: attachment; filename="plotly-basic.min.js"; filename*=UTF-8''plotly-basic.min.js I am loading the plotly library (from local repository) on several mashups and the warning shows up whenever the according mashup is loaded. The Mashups work fine. In Release 9.3.13 we did not receive this warning. I also checked the files ESAPI.properties and validation.properties in ThingworxStorage/esapi folder but they haven't changed. What is the warning telling me? And more importantly, how do I get rid of this message? Thank you in advance for any kind of supportBenny 

Hello All!I'm trying to use ModelCheck (with Creo 8.0.5.0), but all it does is just these messages:ModelCHECK - Unable to determine loadpt directoryModelCHECK is disabled. What I've checked / set: - ModelCheck component is installed- config.pro contains both "modelcheck_enabled (yes)" and "modelcheck_dir"- "mcdir" env. variable added- I use Creo in English, but I also tried the lang=c env. variable- the custom ModelCheck directory contains the "config" folder What (else) must be done to make the ModelCheck work?Thank you in advance!

Bonjour, Ma licence arrive à expiration (creo 7.0.8.0) et au moment de la renouveler on m'indique "client non vérifié" Merci de me dépanner je ne trouve pas de réponse claire sur le forum. Nicolas D   Text translated by the community team using Google translate: My license is about to expire (creo 7.0.8.0) and when I renew it I am told "unverified customer" Please help me out, I can't find a clear answer on the forum.

I just unzipped the product template, i fond two xml TAG-0.xml and TAG_ContainerTemplate-0.xml. iam unable to load  

Hello sir , I need EMX 9 for my creo 3.0 I can't upgrade. But as I was searching online it is not available any where, so can you help me and send me link for EMX 9.0 Thanks  AAkash Jain

Hello, want to download creo student version because I have to finish some work for university   but your host  has some problem: https://prnt.sc/gKhPXy2fUStq    

Can i have a thumbnail view in Windchill Browser? For example, i'm trying to "save as" an assembly, but all the components are showed as a list, and it is hard to remember the name of every component that i want to "save as" too, it would be great if i could see the components in thumbnails.