Solved

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.2Is there any way to easily copy/paste text from any displayed table to the Windows clipboard. We have a promotion approver that handles houndreds of numbers a day. The click/drag/Ctrl+C option is just not handy enough. 

Hi community, hoping you are well, I am writing to ask you about the capabilities of Thingworx Analytics.In the field of predictive maintenance, one of the key objectives is the detection of failure conditions before they present themselves. Concerning that, we'd like to know how that can be implemented in Thingworx Analytics.For example, say you want to predict a pump failure. Failure conditions are known (e.g. zero pressure), and past data is labeled with a boolean "ok/fail" for each timestep. The main objective is not to know the status of the pump given the current conditions, but to predict whether the pump will fail in the short term, given the current trends in the data.We've previously developed a model which can give an estimate of the current condition of a machine. The model was trained using historical time-series data. However, we're unsure of the way forward for developing a predictive model, which can give an estimate of the probability of a failure condition in the futu

Using Creo 7.0.5.0 I'm exporting single bodies from what originally seems to have been a multibody STP that have been imported into Inventor and saved as an IAM file (Inventor Assembly file). I export these as STP and then import into Creo and then save again as PRT. Although a bit tedious it's still a lot faster than re-drawing them from scratch (especially as I have no drawings). Now, in the export procedure the part CSYS seems to stay where it originally was in the much larger multibody, causing my new assembly to have loads of free-floating CSYS practically EVERYWHERE (see first image). Not a huge deal for functionality, but it feels bad. 🙂 THE QUESTION: Is there anyway in Creo to adjust the relation of a no-feature body-only part to its CSYS? (see second image below) I've tried to just delete them, but that deletes the whole body.   

Hello! I was wondering about Creo’s capability to measure the Second Area Moment of Inertia (I). I am trying to calculate the second area moment for a common vascular needle, which has a cylindrical shaft and a conical tip. I was mostly wondering if Creo is able to find the second area moment over the varying geometry of the conical tip, or if it is only able to find one cross section at a time. I have attached a picture of what the needle end looks like below. I believe this process would require me to integrate by hand, as well as utilize the parallel axis theorem to connect the conical end of the needle to the cylindrical shaft. I thought Creo may have some functionality to do this within the program. Please let me know if I can clarify my problem in any way. It seems like Creo has lots of capabilities to find the mass properties of different parts, but since I need the area moment of inertia the mass properties are not required and instead geometry is my biggest concern. &nbsp

Dear Community,I have an assembly where some parts are moving and some others are fixed; I would like to calculate the whole mass of the moving parts only, is it possible? I would need, when launching the Mass Properties, to deselect somebodies and calculate the mass of the remaining ones.Best regards Stefano

Using Creo 7.0.5.0 I'm not sure how to explain this problem, but I'll give it a shot (I can't share the files, I'm afraid). I have a main assembly of a machine. This assembly contains several sub-assemblies. Two of these are the same assembly, but does have some interchangeable parts through a family table making them slightly different. The issue is that I can't change the parts on one of these without changing on the other one. In the main assembly I want to be able to show both configurations at the same time. See it as a car where you have one subassembly for the wheels with the same rims, valves and caps for all, but you want to replace the tires only on the rear axle. Is this possible or do I need a separate assembly for the wheels with different set of tires? Can I create a family table in the top assembly that somehow controls each of the subs? 

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M020-CPS08I would like to find which wtPart to EPMDocuments are associated but never built. How do I find that either in a report or in the tables, Part and CAD documents that have never been built?

Hi all,The goal is to be able to shutdown and restart the application or the server through a internal service. Is it possible ? Thanks.

My client told me that do not allow to revise a wtpart which is discarded. So is it posible to do such thing? 

I'm trying to use the free 30 day trial. MathCad appears to open and work, however the XMCD file converter does not work. I load a file and click convert, but it says "no license" under MCDX status and nothing happens. I received an email with a license file (.dat file type). I followed the instructions to install this license but again nothing appears to happen.

Hello, I'm using WC on my browser, and I'd like to use its API to perform CRUD operations, but I'm not able to find the API documentation as described in the help files. Please see the attached screenshot of the location of these files.I checked my license and looks like REST services is installed. Any idea why I cannot see the "Client customization" item? Thanks,Bert

I have a solver block with an equation and a functionFurther down the worksheet I define two ranges of values, x and Vb. Both ranges have values in the range 0-20.  g(x) returns values but g(Vb) shows as I am attaching the worksheet and an Excel workbook which contains the expected results.I would also like to use WRITEEXCEL to output the values of x and g(x) but I can't get that to work either. 

I have 16-bit TIFF images I need to analyze.  But, it seems that Mathcad Prime 8 (and 7 before) only reads them as 8-bit.  Mathcad 15 read them correctly to their full bit depth, but Prime does not.  Does anyone know how to read 16-bit images to their full depth?  (I also have 12-bit JPGs with the same problem, Prime reading them only as 8-bit.) Thank you, KK

I am using Creo Parametric Release 4.0 and DatecodeM110Creo appearance palette for several segment colors are have to configurate, we tried to set the .dmt file but the location was not fetchable, If any solution for creating the .dmt file and set in library it will be useful for different product as separated segment such like (Product 1 it contains several colors, Product 2 - it contains serval required colors for the specific product etc...)

Had a kick out on UpgradeManager when checking Default and Enterprise Adapters. I've imported my source LDAP to a temp WindchillDS LDAP (let's call this host T1). My source LDAP remains running for production (let's call this host S1). My target upgrade server has the webserver and Windchill installed (Let's call this W1)   I gave it the location and connection information for T1 to find my imported source LDAP copy. I chose to let the UpgradeManager configure my webserver settings to authenticate. What is odd is that when it did that, it used the hostname of S1 for the adapters as they were written in the LDAP import on T1. Obviously, target host W1 cannot see S1 for good reason as this is the current 11.1 production system. Why would it not alter the hostname to use T1 and not S1 when writing the Windchill auth settings? It does not seem right that I would have to update those myself in the ldap to work around issue.

I wasn't sure where to post this but maybe this is a good enough place. Recently when I start up Creo (Croe 4.0, M120), I get an annoying popup from the browser that is built in, as shown here. Is there anything I can do about this? Do I notify someone that their script is failing? I don't know if it's just me. I don't see this when I browse over to the community site with my normal browser (Firefox). Maybe I could stop Creo from bringing up this browser? I never understood the reason for it being there anyway.

I am looking at a mashup looks like carried forward from previous version of ThingWorx. I started working learning from 9.3. Not able to find any documentation.Can I get information how ThingName is configured? .

I am using Creo Parametric Release 7.0 and Datecode7.0.6.0Design Exploration creates .tmu files when you save. Is there a way to convert that file into a .prt file. This would save time once a design is refined.

I am using Creo Parametric - Release 7.0 (connected) Release 7.0 and Datecode7.0.2.0im new at this so maby this is not the correct place to ask, but is sure looks the bestwhen making a restricted parameter with a text document i use µ in one of the options, but in creo when selecting the option it shows "µ" instead of "µ".i tried some other sybols and it does the same thing with the Âannyone know whats going on?

I am using Creo Parametric Release 3.0 and DatecodeM190ModuleWorks Simulation doesn´t start, Creo Parametric crashsHere are the errors that I facedFatal Error

Helping an old man with fading memory would be much appreciated.In the attached Mathcad 15 file, I have somehow enlarged the label fonts.  I cannot recall how I did this.  Can anyone find the setting I used to change the 2D graph fonts? Thanks for any help.Reg

I can't figure out why the first equation in the picture does not work, Mathcad says "These units are not compatible." The units of M.w.mid are kip*ft, and 8 is dimensionless. There are no matrices in this spreadsheet, but for some reason the dot/multiplication symbol is acting weird, or like a dot product. I don't really want to use either of the middle equations, because they don't match AASHTO, but if I have to I will. For reference, the correct answer is 103.0kip. Mathcad 15 also returns 103.0kip without a dimension error. 

Hi Team,I am trying to resume some suppress features in part file.Resume option is not available..Any suggestion

Hi Team, Need suggestion how we can prevent Dragging and opening a Menu tab of Menu widget in a new Browser window. Is it possible to apply a CSS or any other way for this? Thanks,Ravi

HelloI have a table with many indications about a threading including the helix angle. my part and the drawing are in mm and degrees°, but for a supplier we need the have the angle in degree minute second in the table. I looked at the information page with all the &parameter and didn't find how to change the unit just for this value (not the whole file).I think it may be &parameter[something here] just as the number of decimals.Do you know how to do it please ?What I want : What I have :