Solved

I am trying to install MATHCADD v15 on a new computer I purchased and move the license from my old computer however I cannot find where I can download the installation files. When I try to download your site tells me there are no products available. I have purchased several MATHCADD licenses and have a support contract.

I have a part that is going to have a series of corner relief options as sketches (OPTION1, OPTION2 in image below) to be used in an extrude feature (CORNER_RELIEF) that is patterned.  Is there a way to use a Family Table to pass the name of the sketch (OPTION#) to a single extrude feature to create all the part variations?  I'm trying to avoid have to create the same extrude pattern in each instance referencing a different sketch.  

Hello, I am trying to solve a system of differential equations to calculate the change of temperature and pressure in switchgear during an arc fault. The equations are as follows:where C2 equals: "T" is temperature and "p" is the pressure, PL is the power of the arc which is a function of time and is calculated earlier. The rest are constants.I've attemped to calculate this in Mathcad Prime 8 using the rkfixed function, inputting the full equations with the C2 factored into the them:I've input "T" as "y0" and "p" as "y1" in the equations using the matrix index operator. The first equation if for temperature and the second for pressure. The initial conditions are for the initial temperature of 300 and pressure of 101325. I'm getting an unknown error which roughly translates to "calling object expection". It does seem to dissapear when i replace one of the "y0" or "y1" variables with a constant in the second equation, but not in the first. However the results are then inco

When I press enter after thingworxPostgresqlDBSetup command prompt, it says password not supplied. What is wrong there?

I am using Creo Parametric Release 4.0 and DatecodeM060Is it possible to get download of Creo 4 M060, which is not available in download list now?

Hi.I've just discovered Keyshot plugin capabilities and I want to further investigate it. I can see that Keyshot is a standalone application to which you can bring in exported assemblies/animations and render them in a cool way. There's also a plugin for Creo. Each has its cost. Now, there's a Render Studio available in Creo 7 "powered by Keyshot". Is it an equal product to Keyshot plugin embedded in Creo or is it a dumbed down version or something else?

I have simple question... --- Does any of you have experience with printing from Creo Parametric to KONICA MINOLTA KIP 7580 MFP ? Specification available in https://kipnews.kip.com/_Public/KIP75Series/KIP75SeriesSpecs.pdf --- Description of my problem when printing via MS Printer Manager: during printing Creo Parametric returns error "C:\TEMP\my_pentable.pnt : Syntax error on line 13" ... even if the pen table is error free paper output is not correct ... line widths does not correspond with pen table Thanks in advance for any piece information concerning printing on KONICA MINOLTA devices.

Where does the server/daemon information get added on a Mathcad/PTC license file ?I'm getting an error 1067, and my log says:  License manager can't initialize. No server lines in license file.

Hello,           i am trying to connect ABB FLowx flow computer to Kepware OPC server- KEPServerEX V6.           Added it as OMNIFlow computer to KEPWARE OPC server with tags but with no success in collecting data from tags..           Can i get some info what to do or tutorial on this topic?

Hi,I try to upload a file, stage 1 is ok, but stage 2 return an empty json like this; {    "contentInfos":[]} My code in C# is this;Maybe the way i get the stream of the file is not the correct or the content type. Help on this is appreciated. 

edit: I realized this indicates a tag is R/W, editable. I'd imported a .csv file and I'd mistyped the addresses and the tag icons had a red exclamation mark on them.I saw the error and corrected it but now the tag icons have a  pencil symbol on them.What does this indicate?Thanks! 

I'm looking for a way to convert this from .xmcd to .mcdx, but I can no longer download Mathcad 15. What can I do?

How do I attachment documents like PDF or word documents to the WT parts after I create them? 

Hi, my 30 day free trial has ran out for the basic package and i am wanting to continue using it.e

I did the installation of Vufori on Windows10 now this URL request where I can find the same ?

Hello everyone. I'm trying to manually configure my Vuforia Studio application according to PTC installation manual in the following link: Vuforia Studio Help (ptc.com). The problem is that I didn't get any Experience Service URL. How can I get one? Is there any default URL to put in or do I need to manually create?  

This is my first time to create surfaces in CREO. The below is what I got: why the surfaces don't have shade?Without clicking on these surfaces, they will disappear as like the below: why are they invisible? How to know the locations of these surfaces Where is the switch to turn the surfaces on and become visible? 

I am responsible for ordering software for our company. I would like to order under our user name software.compliance@cmc.com but if I do, am I able to assign the software to a user? Or does the software have to be purchased under the user's name?

I was not able to activate the product. When I try using the MathCad license wizard, it says, "program ID already expired."

I'm trying to incorporate a cycloid (standard, not epi-) into a design I'm working on. I tried to generate the appropriate curve using the equation from curve tool, but it only returned a very slight curve. I verified my equations using MATLAB. Pictures and equations are provided below:x(t) = r(t-sin(t))y(t) = r(1-cos(t))where t is some angle and r is the radius of the rolling circle tracing the cycloid.Any help would be greatly appreciated!

Is there a way to change the defaults of these features to 'to next' rather than some randon distantce it auto selects.

Hello, community, I want to bind data to my line chart to display time series data. For this, I wrote a custom service on a helper thing. This service takes in as input a thing name and then outputs the "QueryNamedPropertyHistory" service.  I made use of a value stream.  However, can this also be achieved using data tables? Or will I face some performance issues? Or should I rather make use of a data table for this? Although there might be some performance issues?  ThanksJay_Nisa  

I am trying to extract the data from big string (ASCII)  40 char long into 10 wordfollowing code does not work.I am trying to test service in Thing Template var rawString = me.vbsMachineRawData;var rawHexWord = [];var j = 0;for (var i = 0; 40 ; 4) {rawHexWord[j] = rawString.substring(i, (i + 4));j = j + 2;}error executing service 

Hi all, I'm following this tutorial - Java SDK Tutorial | Developer Portal : ThingWorxbut getting below error while downloading thingworx Java SDK.<Error><Code>NoSuchBucket</Code><Message>The specified bucket does not exist</Message><BucketName>tpg-twxdevzone</BucketName><RequestId>SSTBK364CJJCZCSR</RequestId><HostId>YkVjqZvjehQ6m4eHqFxpXagAmCK1dqoSaA4FAJWZZRT/HGcvAiX4TcSe74XK6mHhn0E0EwVTcdw=</HostId></Error>

Hi, CustomsCSS Code in the Article - CS332229 is not working in v9.3#root_label-1 > .label-text.textsize-normal{ animation: blinkAnime 1s infinite alternate; } @keyframes blinkAnime { 0%{ color: #000000 } 100%{ color: #ffffff } } Thanks in advance ,Rushikesh K