Solved

Hello, I am struggling with giving a thicken a surface in just one direction, that's the X one, and then I need to do the same for every surface I have created with a pattern. But I have realized within the Thicken tool in Options there's Controlled fit and you can choose the direction - but I did some trials and it didn't work (it creates the thickness only normal to surface) It's not too evident, but every surface is flat and focused - so the mid one is straight and the others have an inclination (the more you go to outwards the more the angle is higher).Probably I am unaware of how thicken works - anyway there is also a picture with an inclined surface to show how I apply Thicken to have the extrusion just in one direction. Do you have any suggestion ? Thanks a lot !Nicola 

Hi Folks, I have Thingworx 9.2 running and wanted to confirm if as per the License are there any restrictions on number of Mashups creation similar to no of users restrictions? TIA.

I am using Windchill PDMLink(connected) Release 11.0 and Datecode with CPS M030When I create a Manufacturing view from the design view It collects the Design view version as well.As an example -COIL, coil.prt, K.P00.2 (Manufacturing, Costing, 001)K comes from the Design view version. Is t possible to remove the Design view version from here?because we can see it on the predecessor

I definitely defined f(x,beta), but when I try to draw a diagram, the following error occurs.How can I solve this problem?Inside the red box, "This variable is not defined. Make sure the label is set correctly." 

publishing failure with model target with the following error. [ERROR] Failed to extract viewpoint information from project file 'C:\Users\####\Documents\VuforiaStudio\Projects\####-##-##\resource_cache\mtg\e2253e25-3013-44aa-a4f4-b9f0f88ff33f.vup' 

Hi, I need your help! I need to display a dialog with a list of message, but I have no many example with ProUILabel and what I did always fail. I tried to put code below inside a loop with an incrementing DIALOG_LABEL and label_text as message:ProUIDialogLabelAdd(DIALOG_NAME,DIALOG_LABEL,&grid_opts);ProMessageToBuffer(label_txt, user_msg_new, "board_selection");ProUILabelTextSet(DIALOG_NAME,DIALOG_LABEL,label_txt); Is there a easier way to display the box with list of message? Is  ProUIDialogLabelAdd and ProUILabelTextSet fit for that? Thank you!   

Hello, I know this question has been posted numerous times before, but I couldn't find a specific answer to what I was looking for. I have a text string parameter for a pattern of holes, such as &PATTERN_NO which is 4 I want to add the text "X" after it to show "4X" without a space between, such as &PATTERN_NOX but it doesn't work. The only way to work is to add a space &PATTERN_NO X which is 4 X. Is there is a way to do this without adding a space?

I cant get trial version for Thingworx developer portal,,i am new to this platform,kindly tell me if there any alternate ways

Hello All, I am trying to do customization in Information Structure in which I should show the Service Effectivity details of all the content in it as a table. As I was working on it, I was not able to find any describe link between Document and Content Holder. Can someone suggest me what describe link I can use so that I would be able to get my values? Thanks

I am new to PTC Creo (company currently using Creo 3.0) and was wondering there is a way to create a keyboard shortcut to snap a model to a stand orientation (front, back, right, etc.)?  I was formerly on SolidWorks and you could hit CTRL+1 for front view, CTRL+2 for back, etc.  Is it possible to create these shortcuts in PTS creo 3.0?  Thanks.

When I rotate a coloured image using the functions in Mathcad Prime recalling the image turns out to be in gray scale. How to make Mathcad prime call the rotated image in its original form?

I am using Creo Parametric Release 3.0 and DatecodeM190Dear sir,Please support how can download the Lmgrd server for PTC 32 Bit Proe wild fire 5.0Customer Name Haryana Industries.

I am trying to renew the expiration date of all the applications keys of Thing Worx through Postman.For this, I am using this URL: Thing Worx/Resources/Entity Services/Services/GetEntityListByRegEx?type=Application Key and it gave me the list of all applications keys which are present in the Thing Worx but how can I use the setExpirationDate service for the all the keys which I got. @PEHOWE @PaiChung @slangley 

Is there a way to extrude assymetric values in both direction?

Dear Support Team, I've noticed that when I create a sequence in Creo Illustrate and import it into Studio, some parts get lost or become transparent, when they should not be. Is there a solution for this problem? I cant send an example in this forum since it is a customer model. I can show it in a call. Best wishes, Alex

hello! everyone: When I check in file's it happens "cannot check in place holder document", I want to know what's the problem and how to solve it. it's urgency for me!Thanks!

I had another engineer come to me with "cannot upload to Windchill because of 123xyz.prt not unique error. Part 123xyz.prt is not in the ASM and has not been since several revisions ago." I tried the usual reference viewer and break/delete old unused dependencies. There was plenty to fix there but the 123xyz.prt was not listed. Still blocked from upload.  Model info got me this info on the culprit"SUBSTITUTION IS BY SIMPLIFIED REPRESENTATIONCOMPONENT IS NOT ACTIVE IN ANY SIMPLIFIED REPRESENTATION" After googling for a while the solution is to convert the old feature to display it in the ASM model treeSo have to add config.procnvt_unused_subst_comps_on_retr yes Then the part shows in the ASM model tree again as suppressed and can be deleted.Ghost Part beaten once more.see https://www.ptc.com/en/support/article/CS16326Is specific to family table fixes but is applicable here. 

I cant use my login details to activate the matchcad 15 trial version, please help

When I make assembly codes 10-11-12 not follows 9. They goes under 1 🙂 Is there a solution for this?

Hi, I am using collection widget and have a info-table property which holds different values to get in the mashup. 1) How get invisible the values which we don't want to show in repeating child mashups as per in attached screenshots ... "Output" image is the what i am getting and over there when I tired to give the visible binding to the shape Availability even for RTE the shape is going away.  2)If you see my attached picture of "4 tiles of KPIs" - like OEE, RTE, TEEP, COE these are calculating according to the formula in services. How to make work that in collection widget is my second question.   Please help me in this problem.   Thanks, Lohita

I am using Creo Parametric - Release 4.0 (connected) Release 4.0 and DatecodeM150请问如何使用TOOLKIT给尺寸文本添加“文本符号”？   How to add "text symbol" to dimension text using TOOLKIT?   Translated with google translate by Iuliana Nuta, 16. june 2022

Hi,   How can I get the value of a scanned ThingMark in vuforia, I want to get the value of a scanned value - meaning the id on a printed thingmark not the id on studio.   I have been trying to use "setupTrackingEventsCommand" function but I did not succeed.     thanks in  advance.

I am using Creo Parametric Release 4.0 and DatecodeM100We exported our projects under Parasolid format (.x_t) and several times customer complain the imported files in NX several time some components are imported as surface and not as solid in Unigraphics and they spent time to solve this issue.In Creo Parametric the files imported came as solid.I don't have the Unigraphics Application and also I don't have experience with this application , but can you give us an explanation why do you think when NX when import files came with some components as surface.Thx,CC

I recently purchased a one year Student licence for Mathcad Prime 8.0 (10€) an received a confirmation-mail. The mail does not contain any product code or information about how to set up the one year licence within the mathcad software.Please fix this as soon as possible.regards,Sebastian Müller

I am using Creo Parametric Release 4.0 and DatecodeM040Creo Drawing showing green dots which are not in drawing originally. The model is also distorted. Setting the graphics option to OpenGL resolves the issue but the system becomes very slow.Here are the errors that I facedIncorrect rendering of the drawingGraphics driver used : Intel (R) UHD GraphicsAnother system with the same configuration renders the drawing quite well.