CAD

Hello,I am trying to insert a bitmap image into the header of MathCAD 15, its size is about 124kB. Could someone assist me with it ? I get an error saying the tool is unable to read the file.Thanks!

Is it possible to create curved 2d text in drawing mode?WayneFCreo 6.0

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0hello. This is Hong Cheol-min, deputy manager of Fuzzy System Technology Department. It is said that G-code is manually created and used for processing on equipment using modeling or drawings created in Creo. 1) Please check if there is an option module that can convert G code or utilize it. 2) Whether or not to automatically update when modeling is modified Reference: Example image related to G code thank you - Hong Chul-min Compensation -------------------------------------------------- Translated the below subject and Description from Korean to English using Google translate on 22.11.2022 at 8:55am IST by vnamboodheri--------------------------------------------------Subject: G코드 변환방법 및 옵션모듈Description: 안녕하세요.퍼지시스템 기술부 홍철민 차장 입니다.Creo에서 생성한 모델링 또는 도면을 활용해서 장비에서 가공을 위해서 G코드를 수동으로 만들어서 사용한다고 합니다.1)G코드 변환이나 활용할수 있는 옵션모듈이 있는지 확인부탁 드립니다.2)모델링 수정시 자동 업데이트 여부참고 : G코드 관련 예시 이미지감사합니다. - 홍철민 배상 -

Hello, Was wondering if someone could help or knew the answer this question? I am using Windchill and recently switched form Creo5 to Creo8. I'm trying to create a 2D drawing, I navigate to the correct directory where the template formats are and can't see them to use and select. Anyone know why I can't see and use them in Creo8? Do I need to create new ones? Thanks,Jeff

Creo 7.09.0   I have some new UDF features (.gph) that are used as subordinate UDFs and placed on multiple designs in part mode. I have created model annotations in the UDF reference parts (.prt). The UDF geometry works as intended but I am struggling to automate the detailed views on the drawings which are repetitive in nature. I want to set up one set of annotations in the reference model and then show them in a detail view on a drawing without manipulating the location of the annotations shown every time I reuse the features.   Combination states are not portable through a subordinate UDF from the reference part used to create the UDF, so that did not work.   I have also considered importing a detail view from the UDF reference part but that creates a new drawing sheet and is not a good option IMO.   I can show the annotations embedded in the UDF as they do come across into the target models but must manipulate the spacing etc. after showing them in a drawing in

Hello, I want to create a mapkey to copy a sheet and then come-back to the original sheet.I imagine to use the parameter sheet_number but i don't know how to store its value. Do you have any idea ?Thanks

I am using Creo Parametric Release 9.0 and Datecode9.0.0.0I created a Simplified Representation of an Assembly. I created a Style for the Simplified Representation. I have a drawing, I added the model to the drawing (Simplified Representation chosen). The Style grouped with the Simplified Representation does not come through.My goal is to have some parts transparent and other parts not -- this is the Style I created. The view is an Isometric view, with shading turned on.I moved on to re-creating the Style I already made in the assembly, in the drawing, using Component Display. Component Display isn't working. I select my components, select PhantomOpque, won't save.

How would you capture and differentiate the 3+2 axis machining and 5 axis machining. For example when I have 3+2 axis insert a command and when in 5 axis insert other command.

Hello All,for my master project i need to do Modal analysis of press fiit shaft hub connection to find natural frequencies. I have used friction free contact for the press fit simulation. 1. I found that the differnce between calculated contact pressure and simulated contact pressure is large2. As the contact interfaces in Modal analysis are ignored, i am trying to idealize the press fit interface by spring, But can anyone please explain how may i calculate the stiffness of spring for press fit interface, or is there any other method to perform modal analysis for press fit. I ghave attached the CAD files and mathcad calculation in the folder. Any suggestions would be appreciated.  

Hello , I installed CREO PARAMETRIC version 8-0-4-0 but Simulate is not installed as it came in version 6 is there anything I can do?

Illustrative file attached.

None of my printer options are available in Prime 6.0, is this normal? This is what I see in Prime 6.0: These are the drivers on my computer: I would expect Adobe PDF to show up in Mathcad too. I see this article from PTC "How to create PDF of worksheets from Mathcad and Mathcad Prime", but is that really the only solution? Export to rich text > open in rich text editor > print to PDF cannot be the only workflow (i.e., 3 steps involving 3 different applications every time I want to print to PDF - what!?) I tried repairing and reinstalling Mathcad and Adobe, but Adobe PDF driver still does not show up as an option. Does anyone know if printing directly to PDF is supported in Prime 6.0, and how to fix it if it is?

As per the original post.    Hello All,   i am trying to do press fit simulation with friction free contact, but i found that the difference between calculated contact pressure and simulated contact pressure is very large. Moreover i need to do modal analysis of the pressfit contact to find natural frequency. As the Modal analysis ignores the contact interfaces, i am trying to idealize the press fit contact by spring element. But can anyone suggest, how may i calculate the spring stiffness of the press fit contact. I have attache zip file consisting CAD models and the Mathcad calculation. Your feedback would be much appreciated.                

Hi everyone,I trying to program conditions to solve the calculate the settlement which is base of some conditions but i could not, every trial has a new wrong outputs or errors, I will be thankful for your help if possible, -  if initial eff. stress equal to pre-consolidation stress then use eq1 thanotherwise check ifinitial eff. stress bigger than pre-consolidation stress AND init. stress + changes in stress smaller than pre-con then use eq 2other wise check ifinitial eff. stress bigger than pre-consolidation stress AND init. stress + changes in stress Bigger than pre-con then use eq 3 then use eq2 than

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0   Use the ProConedataGet function to obtain an alpha angle. This angle has positive and negative values. What is the basis for judging positive or negative?   Translated by Simona Cuciureanu using Google Translate on 5.12.2022 --------------- 使用ProConedataGet函数可以获得一个alpha角度，这个角度有正值也有负值，判断正负的依据是什么

I am trying to get a control looking something like this (from another piece of software) The nearest I have been able to get is this And even this is showing an errorI have a feeling that what I want is not possible but it would be great if I could be proved wrong!  

Hello. I model a car with the Style Tool. I need to make a transition surface between two surfaces, but I don't know how to make it in the Style Tool. Here's an image that shows where exactly I need this surface:  

I'm having trouble getting a minimization function to work for my HETP graph.

This works just fine in a fresh worksheet; however, in my more complex Ballistics worksheet, I get the following error. Both worksheets are attached.Even if I close and reopen the ballistics worksheet, the problem persists.😫Thanks for any help.Reg

Hello, Can someone tell me why Mathcad isn't able to solve this simple variable? This command works everytime but with these types of equation it doesn't:  I have tried other commands but it still doesn't work:   The solution is quite simple, but I would like it to do it automatically:   Can somebody help me? Sorry if there are mistakes in my english. Thank you. 

Hi Folks, I'm converting V15 files to run in Prime 8, but can't figure out out to remove the red arrows and red lines.  The file runs.  Right clicking on the arrows doesn't do anything.  I can't find anything in the online documentation.  I must be missing something.  Can anyone enlighten me? Thanks, Mark files using the converter in Prime 8.  

Is there a procedure to use the data from an referenced Excel file or matrix to populate a combo box? Thanks,

I'd like to specify a matrix size and have it filled with elements from a vector. For this example, I have a vector containing state names and I want to have them fill a 7x4 matrix. I'm running into 2 issues with the attached sheet:I'm very rusty on programming and matrix operations, so the only way I've been able to fill a matrix at the size I want is to reference the specific elements of the vector. I'm sure there's a simpler way to do this using a loop but I haven't been able to figure it outIf the vector changes size, I'd still like to be able to output a matrix with zeroes filling the rest of the nodes. Currently, if I set up a 7x4 matrix and the vector only contains 16 states, the output matrix errors outAny help with this would be greatly appreciated!  

I'm getting consistent crashing when even just hovering over any part of the "Table" tab.  TOTALLY unacceptable.  Our standard config.pro does not have the "draw_models_read_only yes" option, though my personal config.pro does.  Doesn't matter, it crashes on my PC regardless of if I load my config.pro or not, and I can repeat that crashing on several other PC's here regardless of whatever config.pro is loaded.   Yes, I posted in the other thread, and no, as outlined above the config.pro option doesn't help.   Anyone else seeing this?

So, what I've been doing a lot of lately is marking up drawings of the people that I supervise for Promotion Requests in Windchill.  I tried using Adobe Pro, but, honestly, it sucks.  REALLY sucks.  TOTAL PITA to work with.  I hate Adobe in general and trying to draw GD&T symbols and geometry is miserable and time-wasting.  Then I had a brainstorm:  AutoCAD.  In AutoCAD I made a .dwt template that has a BLOCK (black) layer, and a MARKUP-RED and MARKUP-YELLOW layer, where the BLOCK layer is the current layer for when I import the PDF.  I import the PDF generated from Windchill as a block (so I can't accidentally change it) making sure to have the "Raster images" checkbox marked too:   Then I switch to the MARKUP-RED layer for corrections, and use the MARKUP-YELLOW layer for "ok".  You can create shapes (rectangles etc.) to use for yellow cross hatching, then freeze the BLOCK layer (so it doesn't get confused with the block geometry