Solved

using MathCad 15, how do I break an equation that goes for several pages into a lower line on the same page?

Can we have in Mathcad same statement?a:=1b:=2swap(a, b)a=2b=1

Is there a person who kindly would like to dedicate some time to my little problem? I would like to know if the difference  method  and the amplification matrix are accurate.Thanks so much.F. M.

hello .I am student and i want a lincese in Creo 2.0

Hi all,my intent is making "a thing" (I thought a mapkey or a UDF) that can me permit to do a hole with a spot-facing for screws with circular head.I'd want that the deep of the spot-facing is a pre-defined value, like the diameter; furthermore the diameter should have the tolerance of +0.3,+0.1 mm.This tipe of hole should be placed in various type of positions, so I'd like to use the tipical placement of the "proE internal hole feature", with the "offset referencies".With a mapkey i can create this, but without the tolerances on the diameter.With a UDF I gotta do more passages in the placement and in the successive edit definition.In your opinio hich is the best choice and how do it?ThanksByeThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the

Hey guys, im there with another very special question because of my limited Mathcad Knowledge.Now as following my last Posting i extended my Mathcad Loop and i think my Calculation is resulting in the results which i need to know.Now as an short explanation:The Input File for the Calculation is the Excel File.Table 2 from D2-D33 are the input Parameters for the Calculation.The Result of the Calculation is written in The same Excel File in row 51 and 53.In Mathcad are 2 Calculations implementet.1) Calculation of maximum axialforce with a given moment (marked as yellow in the sheet)2) Calculation of maximum moment with a given axialforce (marked as orange in the sheet)Now the first Calculation as seen in D1 is for calculating maximum force and momentum.------------------------------------------------Now what i need to know:The next step is to perform a Variation Calculation with the scalingfactor as seen in C36 (applied to maximum force row 38 and 39).------------------------------------

If using Windchill/Intralink 10.2 (not pdmlink) can a "CAD Worker" be configured to create exported STEP during the release workflow?

Hi This is Rahul, I am trying to learn using Thingworx Platform.But I am facing problem connecting Intel Galileo Gen 2 to your platform .I have followed the path that you have mentioned in the developer zone,but i am not able to run using winscpIt seems that some steps are missing in the process.Can you provide me the any guide or guidance in this context.Thank YouRahul

What ACL settings have to be definedin the Integrity Admin Client to allow / deny the creation of Dynamic Groups for specific User or Gropus ?

I have an application where we are logging several properties on different pieces of equipment.  I originally set them up with value streams because its a very quick and easy way to log data.  However, we now require that all of the properties be logged at precisely the same time, so that we can have a file with a row having 1 timestamp and all of the property values at that time.  Should I be using a regular Stream for this so that I can control the logging?   I have never used one before and it seems like the documentation talks a lot about Value Streams and very little about Streams.  Thank you!

Hello,   I'm trying to place a sketch on a sheet metal surface. All goes well until I make a flat pattern. Then the sketch is not on the surface anymore but floating on his original position The goal is to have the text and graphics on my drawing. This drawing I send to my supplier and then the text is engraved on the sheet metal by the laser cutting machine. How can I solve this?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hello everyone.Is it possible to exclude Pattern members using Relations or Pro/PROGRAM? I have an axis Pattern in a model, and what I want to do is to turn on or turn off certain features from that Pattern based on some questions that I ask in the INPUT area of Pro/PROGRAM.Thank you for your timeThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hello, I wonder how to make cosmetic thread larger that M68 - M100x2 for instance. According to ISO standard M68 is the largest thread thawas defined in Creo Parametric 2.0Can you give me some guidelines?Best RegardsThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

With the operators provided by mathcad, can we create the math operators <a, b> = ...., [A, B] = ...., ect? it does not seem feasible. Do you agree?Otherwise, I would like very much, see clarifying examples.Thank you very much.Sincerely F.M.

Hi everyone,I have to make a custom filter to deactivate some buttons when the root part (here the green/yellow cog) was on a specific state.And when I select the other sub part (pink cog) the button will be disabled because of the root part.As you can see on the picture, I successfully disable "Insert existing", "Insert new" (and the drop down actions), but I'm still stuck to disable "Remove" action.What I know :Create a new custom class filter : (It works !)public class FilterEditStandartPart extends DefaultSimpleValidationFilter {...     if (root_part.getLifeCycleState().equals(States.RELEASED)) { // I do my test with this state, not the final state I need to use          status = UIValidationStatus.DISABLED;     }...}Create a service on my "properties.xconf" file and propagate it : (service working)<Service context="default" name="com.ptc.core.ui.validation.SimpleValidationFilter">  <

I am having slight difficulty graphing this Mathcad problem. When I try, it sends me an error along the lines of "all evaluations either resulted in a complex number or error." The problem is trying to plot the concentration versus position of diffusion/flux through a thin layer membrane. I have to turn it in by tonight, so I would love any help!!Thank you!

I have two div elements in section element. I would like to change order of those two div elements depending is element in even or odd pages. When I run PDF publish I don't get any errors. Any ideas or workarounds how to do this?var currentNode = formatting.currentXMLNode;if (formatting.currentPage.pageNumber % 2 == 0) { //note! first element in section is title  if (currentNode.childNodes[2]!=null && currentNode.childNodes[1] != null){    currentNode.insertBefore(currentNode.childNodes[2],currentNode.childNodes[1]);    formatting.write(currentNode.nodeName + " Child node1:" + currentNode.childNodes[1].nodeName + " Child node2:" + currentNode.childNodes[2].nodeName);  }}

Hi All,Can we add an Attribute of a Sub type of WTDocument which is an optional and single valued string attribute which can have only one amongst the suggested values and no other values should be permissible.Like the suggested values are like sayABCDEFSo If yes kindly tell me how we can add it ?Thanks and Regards,Aditya Achanta

It's on the inside of a cylinder - not the outside.It will be a mold, get it? the inside will be the outside of the part - derp.Any suggestions? I've had no success whatsoever or I would not be asking.Thanks,VinceThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

In the process of creating a Sandbox with several levels of directories and with many files, sometimes I'll need to update all files in it with a .docx extension or .csv extensions to a specific version or latest checked in. I've had no luck so far, as the resync for some reason is not recursing down directory levels. I've tried stuff like this:si resync --revision=:head --recurse --sandbox="/home/ls897/perl/head_foot/sbx/design/code/project.pj" "/home/ls897/perl/head_foot/sbx/design/code/*.doc"With this response: The file *.doc is not a current or destined or former or pending member or a subsandbox.si resync --revision=:head --recurse --sandbox="/home/ls897/perl/head_foot/sbx/design/code/project.pj" "*.doc"With this response: *** MKS125335: Out of tree members and subprojects (not located in the project directory or a subdirectory of the project directory) are not supported.

I am having trouble with my speed not posting properly. I programmed the speed at 10000 and it posts at 0, if I program speed to 9999 it will post ok. I am thinking it is something with the post not anything to do with Creo. I have looked at the max machine rpm and it was set to 10000 and I changed it to 12000 to see if that would help but it did the same thing. I don't know a whole lot about the posts so I am afraid to mess with it to much. Has anyone run into this problem? Thanks Bernie This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hi,I have several series of points (x, y) and I have fitted each series in an exponential curve using expfit function.Each series of x and y points has the same z.Now, what I am trying to do is getting a general equation (x, y, z)  to relate x, y and z in one equation.I tried to create a surface with CreateMesh (using regress and interp with all the points, not the fitted curves) but it seems that I do not have access to the equation which links the points. Is it possible to get an equation of the surface?I tried to do something with the fitted curves instead of the raw points but I have not found how to do it. s there a function in Mathcad 15 to do that?I am attaching two files with the fitted curves and the surface created.Could anyone help me?Thanks in advance

Hello. I was wondering if there is an external access point to the Thingworx REST API, from what I've seen in the documentation it can only be accessed from a localhost instance. I saw that someone asked a similar question but by the answers I was unsure if it is possible or not.

Hello,I am trying to write a programme in Mathcad Prime 3.1. I am using the programme to compute the global stiffness matrices of bars in a structural system (just a 6x6 matrix). However Mathcad is returning an error message saying that the expression is too large to be calculated (see attached image). Surely Mathcad shouldn't have any trouble with such an expression. It was outputting correct values until the 4th row at which point it started returning this message.Has anyone encountered this before and know how to work around it?Cheers,Mike

Hi,How to identify the user who invoked the service?One option I'm aware of is based on the appKey     var loggedInUser = Resources["CurrentSessionInfo"].GetCurrentUser();with this approach, I had to create an appKey for each user.What other options are available? If i didn't want to generate a new appKey for every user.RegardsArunkumar D