Solved

Are there any experts in the CREO NC processing programming function???No matter how I look at it, I don't know the difference between WORKPIECE and MILL VOLUME, can anyone tell me???  

I am using Creo Parametric Release 9.0 and Datecode9.0.5.0When I start a mold analysis (mold flow), Creo merges my default template solid part with the part I'm analyzing. My default template has solid geometry in it so I get a merge between the part I want to analyze and my default template part. Even if I delete the template part, the analysis still includes it. It is using the file set by the config.pro option: template_solidpart. Creo 6 did not exhibit this behavior.Here are the errors that I facedThis shows up in the message window when I click on the "analysis" optionUsing the template default \\prod\root\Other_Drives\CAD-Ilox\Intralox_Molds\standard_components\startup_models\startup_mold_part.PRT as the template.

Hello, I was wondering if anyone has tried using Creo Illustrate with Creo Parametric models but using Siemens Teamcenter.  I'm trying to find out if Illustrate can connect to Teamcenter, as that is a requirement for a new team I am working on if they want to consider using Illustrate. This team is on Creo 10.0.3.0 Thanks!

Your website says the student edition comes with simulate-lite... but it does not. It is not listed when I go to >help> system information even though I very explicitely checked the box to install "simulate" during the installation process. What's up? How do we ACTUALLY get simulate-lite to work?

Hi Everyone, I am currently running  Thingworx version 9.3.5,I am currently trying to run a code on replacing X number for a message what would be the best way to do that?Example below:let message = "";switch (number) {    case 253:        message = "On Standby";        break;

For years a person from PTC would provide the Professor with the information, however that person has not responded for three months now.

In my attached Mathcad 15 worksheet, I am trying to compute an IFFT of an analytic function of frequency for a know time function.  To display the desired bandwidth, I have to use a large number of points.  Time points = 2^m and frequency point = 2^(m-1) where m=24.  The final plot will not plot due to the maximum plot points unless the step size is at least 70.  The way I have reduced the plot points means there are only 2 points between the first time point and the next time point at step x Dt.  I tried to do an interpolation from the original vectors to fewer time points; it ran forever.  Maybe user error on the linterp function.  Attached is the xmcd file.  Auto calculation is turned off.  The calculation time on my old PC is about 15 seconds.1.  Can linterp not interpolate to fewer points?2.  Is there a better alternative to what I have done?Thanks much.

I was wondering if anyone here has a powershell script that I can use to deploy CREO 9 through Configuration Manager. I can create a custom script to install but I would like to know what is needed to add the license and everything fully automated, perhaps an XML file that instructs the software. 

How to solve this problem 

Hi,I have a remote thing that is responsible for getting files from FTP. When running the remote thing exe, I get the following error message:An item with the same key has already been added. What is this error message reffering to? I Can not see thhat the thing is connected prior to this error occuring.As this is work for a client, it is imposible for me the share any more details than this. Kindly Oskar Berntorp  

I tried to find a solution this but so far no results. This works in Smath as is, but now I'm trying to transform all my formulas to new software, Mathcad does not seem to like how it is calculated.Can you tell me what I should do to make it work?  lamda2*L2 can be calculated separatedly, but not within the formula.. 

I am curious if someone has done this. It does not look like it is straight forward using infoengine. So wondering, if anyone has used infoengine to get workflow intruction, variables, and voting options of an open task.thanks.

Hi all, I have to run a query on MS SQL Database table, which has columns with spaces in their names (ex: 'SA03 LH CS BRG DEPTH (mm)').How do I query this successfully?Here is an example query: SELECT *FROM <<tableName>>WHERE <<tagName>> != 0; Here <<tagName>> is a column with space in its name. 

If Windows is hosted on the Windows OS can the old and current logs be editable?

Creo Student License Hi Everyone, I have student license(Creo Lab Pack) can I borrow this license like Floating license?, anyone can help me

Maybe I'm doing something wrong, but I can't seem to figure it out. There are several posts that show examples of explicit working quite well, but for some reason I can't get it to work.Here is what I'm trying to replicate:And this is what I get: Also, is there any way to hide the whole "explicit,a,b,c" part? Thanks in advance. 

Hi - how do I tell Mathcad Prime to include an initial condition when symbolically integrating?  I want the initial value of my function to be 0.1 at time t=0.  See attached. thank you,russ

Hi there, I used Creo Parametric Version 9.0.3.0.  I don't have stl option when I click "save as". Dose anyone have this same issue? Thank you in advance for your help! 

I just went through the nightmare of discovering that I was calling for 2 thousand second dwells on countersink cycles.  I thought the machine had quit, but that wasn't it.  My controller expects P periods in seconds not milliseconds.  I fussed my around G_post, found and fixed the variable and checked that it now works.  My question is what to do with Creo residual installations from 7 to 10, each one containing gpost option files for my machines, some of which have been modified over the years.When I upgraded to 10, I copied the gpost files from Creo 9 into the same folder that they would have been in 10 and it looks very much like that is what Creo Manufacturing has been reading when I call for a work-center I have on file. I fixed the uncx01.p33 (the one in the Creo10 system files) which is the option file for my mill and I now get the 2 second dwells I was looking for I suppose I can move all of the older trees to another drive and Creo won't be able

We regularly download vendor STEP and IGES files for use in our designs.  Some of these downloads are assemblies that we bring into Creo as a single part.  The vendor lists the weight and the CG location of the assembly on their spec sheet.  We know how to make the imported part 'weigh' what it needs to weigh based on the part volume.  How do we go about defining the CG of the CAD model so it represents the reality of the vendor model? Creo 8.0.0.0 Thanks

I wish to map calculation results in a 2D matrix onto the surface of a hemisphere to produce a "heart map" showing the magnitide (colour) and orientation of the maxima and minima in the dataset. The matrix data are the result of calculation of stresses on a plane for a grid that has been incremented by 15 degrees in the polar and azimuthal directions. I can generate a hemisphere with the appropriate 15 degree grid but do not know how to map my data to this grid. Can it be done? Any assistance would be appreciated.CheersRoss 

I'm trying to find the effective stress, I wrote a program in mathcad however the result was zero always I think the error occurs because of the depth . Since I need to use the previous depth of each stress and not the depth in the same point. Can anyone please help me?Also I need to find the midden value but not sure how to find that in excel  in mathcad   

I am using Creo Parametric Release 4.0 and DatecodeM110  Hiding cosmetic lines in the general view also hides cosmetic lines in child detail viewsPlease tell me how to hide the cosmetic lines in the general view and display them in the detailed view. ---------------------------------------------------- Translated the text from Japanese to English using google translate. Subject - 一般ビューのコスメティック線を非表示Body: 一般ビューのコスメティック線を非表示にすると、子の詳細図のコスメティック線も非表示になります 一般ビューのコスメティック線を非表示で、詳細図のコスメティック線を表示する方法を教えて下さい。 ----------------------------------------------------

I am developing a custom IFX fastener library. I want to build some fasteners in plastic material. I can easily change the parameter "MATERIAL" so that the string parameter would have any value, but I can't find a way how to actually set the model material in generated instances, so that the weight would be correct. So far i've tried:- assigning material in the source file that the instances get generated from- doing the previous but also adding a line to .dat file "MATERIAL NYLON66" (note that this material is currently assigned in the source part *.prt file, i haven't just used random name) However, the generated instances still get material "10_9" and density of steel. How could I set the plastic material in generated instances? @OliverGräbner  - you have been helping me on another thread with IFX, but since this is quite different topic I thoght it would make more sense to start a new thread. Thank you!

I am using Creo Parametric Release 10.0 and Datecode10.0.4.0In Creo 7.0 I was able to list the PTC_REPORTED_MATERIAL parameter as column inside the model tree.In Creo 10.0 the PTC_REPORTD_MATERIAL is not shown anymore. Instead there is always List (in German Liste) displayed. Is there a way to display the active material of the model inside the model tree again?Here are the errors that I facedno error or warnin - the parameter PTC_REPORTED_MATERIAL is not displayed as expected.