Solved

i need to log data that trying to send to stored procedure that may case of issue 

Hi,How to solve this non-linear system of equations:

this is my service and my datashap  this csv file    

In DPM production Dashboard, we have a production accounting section inside that it is showing a delay of around 2 hours is it normal?Please check system time and production accounting timeRegards,Atharva

Hi,I have this matlab code and I want to translate it to Mathcad Prime. I tried below one way, but maybe someone can implement better.Matlab: Mathcad Prime 9: And if I remove evaluation of t, the the plot does not work anymore: And then how to make this difference/calculation:

Version: Windchill 12.1 Use Case: I need to create structures for a part file where it hold the BOQ .Does windchill rest api provide support creating BOQ and How?Description: I need to create structures for a part file where it hold the BOQ .Does windchill rest api provide support creating BOQ and How?

hi, I have a problem with the extrusion of this component. I created the snail through the boundary blend, now to create the straight part of the inlet I'm making an extrusion but I would like this not to intersect the blend so as to leave a void at this point: 

Hi,I am trying to configure the new MCP10 Text Box Advanced Controls.I want to use the Text Box as a PASS/FAIL display but I am having two issues.1) How do I pass more than one input into the Text Box? Currently, I can only add one input.2) How do I display text that is a result of the JScript routine in the box? (similar to how the Advanced Controls demo was shown in MCP10 promo, i.e., PASS = green, FAIL = red and so on).Currently, because I cannot pass slider_test and Limit into the Text Box, I have manually set Limit = 5 in JS (testing code). var slider_test; // Define the external variablevar test;var Limit;var limit;function TextBoxEvent_Start(Inputs, Outputs) {// Assign the value of 'slider_test'slider_test = Inputs[0].Value; // Ensure this correctly gets the input valueLimit = 5; // Ensure this correctly gets the input valuetest = slider_testlimit = Limit}function TextBoxEvent_Exec(Inputs, Outputs) {// Output "PASS" or "FAIL" based on the value of '

Does anyone know what algorithm is used for the various FFTs in MATHCAD 15?Thanks,Reg

Hi,As I have this equality: I see that I received 2 different answers out of the solve block for V2 and IE, though both systems of eq are the same...V2 and IE should not be the same for both cases?    

Hello Everyone.From : To : So the question is : "solve x , y ?"Thanks in advance for your time and help.Best Regards.Loi

Hello, I have a multibody part (prt0001) that is a clam shell design containing two bodies. I want to create two drawings - one of one half of the part (Body 1), and one for the other half (Body 2). Any solutions that I haven't tried below would be much appreciated! Thank you in advance 🙂 I attached the part and drawing I am referencing below. I have some solutions, but none of them are exactly what I want:1. Create a new part that references the Body in prt0001. (This is less than ideal because you cannot bring in any dimensions from the original part. All dimensions must be manually placed, which is a lot of unnecessary work).2. Create two drawings for prt0001 containing both bodies. Hide all bodies you don't want to see when you are ready to export. (However, this stinks because the user needs to remember to hide other bodies, and then hide other bodies in the model. Far less than ideal, especially if you are working on both parts at one time).3. I tried using C

How do you move the location where the note starts in a mm drawing template?  In our inch drawing template the note starts where we want (in the upper left corner).  However, in our mm drawing template the note starts in the lower left corner.  It isn't hard to move, but we want it to start in the same place everytime. Thanks!

Hi everyone! Does someone know if there is a way to know how many documents are uploaded in the documents tab in Codebeamer 2.0?  Thank you!

 Thanks for looking.  🙂 I have a laptop running a fresh install of Arbortext 8.2.2.1.  As in, freshly installed this morning.  I also have a desktop running Arbortext 8.1.2.0. The new install of 8.2.2.1 will not render .eps files.  It will render SVG files, but not .eps. View Graphics is checked. Arbortext 8.2.2.1 does not report the graphics as missing if I do a completeness check. If I double-click an eps file icon in Arbortext, it opens the .eps file in Adobe Illustrator.    I copied the file set with .eps art over to my desktop, running 8.1.2.0,  which renders the .eps files just fine.  I tried a couple of other file sets using .eps art with 8.2.2.1, and it does not render .eps files from any of those publications.  Is 8.2.2.1 specifically broken?  Or am I missing a setting somewhere? Thanks in advance,  Dan   

I have similar question to this, but different.   Lets say my assembly has the following structure: MAIN ASSEMBLY --SUBASEEMBLY1    --PART1 (inside SUBASSEMBLY1)    --PART2 (inside SUBASSEMBLY1) --SUBASEEMBLY2    --PART3 (inside SUBASSEMBLY2)    --PART4 (inside SUBASSEMBLY2)   I want a note to say the name of highest level model tree element, not the lowest level. The method described in this topic results in lowest level item appearing in the note: if i point it to PART1 then the note says pn of PART1   I want to show the PN of the highest level model tree item PN to where the pointer is attached. So my goal is to attach the note to PART1 or PART2 and have the note saying the PN of SUBASSEMBLY1   I am using expression: &PTC_WM_NUMBER:att_mdl I am on Creo 9   Is this possible? If not directly, then any are there any workarounds how to achieve this? Thank you!

 Subject to: Minimum lies in a range [0;2*π] Write it for MathCad15 please.Thank you

HiAs I could read here Ext-Packs I can remember the very useful Extentions packs for Mathcad version 15 but are these also for Prime 10.0 or Prime 6.0 available? And are these Ext Packs the same for Prime?THanks

Hello, I have some performance issues with Creo working with Windchill:When I open an assembly 3D model with Windchill, sometimes it takes a very long time (about 15 minutes), but other times it is quite fast.So, I checked the trail file to find out what happened when Creo opened slowly.The trail file shows:（the codes are changed verytime）After Creo loads "jc120301000a98," it tries to load some items from my local disk, taking 15 minutes.My questions are: What are these local items?Why does Creo try to load them from my local file system (the directory is where my "config.pro" is located)?Why does it sometimes take a long time and other times load very fast? Is there a method to avoid the long loading times?When I try to open this assembly 3D model in a local folder, Creo also tries to load these items.And here is the structure tree:  

The result for the steady-state temperature (modeling it numerous different ways) is consistently T=364 K. But the result according to Power=s*e*A*T^4 should be T=314.63 K when I use:A=Area=1m^2 (modeled as a solid or as a surface sphere using shell elements)e=emissivity=1.0Power=power generated within Sphere= 1000W The assumption is this is a sphere in space that does NOT have any solar flux adding heat to it.Why is the answer so different from theoretical? I'm needing to use thermal radiation for the first time for some space equipment and am wondering whether there is a way to do things that will yield correct results for radiation.  Thanks. I am using Creo 11.0

Hi - in the attached Prime 9 worksheet my last line (solving for the only unknown, L subscript 4) hangs. The variable L subscript 4 is the only unknown in the equation.  Is there a better way to solve for it than what I'm doing here?  thanks,russ  

HiUsing Creo Parametric 10.0.1.0Wanting to know if theres a way to rename dimensions and show them in the sketch view.So far have tried 2 methods, which do not show in the sketch view itself.the first being the "dimesion text" that also shows in a drawing, the second being the dimension name (then toggling the "switch dimensions under model or tools tabs) As an example, this dimension "160 wide" is also labelled as wide, inside sketcher it shows as only 160 or "sd4" (the original name before renamed)  

Getting the error while activating my licence , any one have any idea ? Please help ?  Before upgrade have transferred my licence back to kepware, i can see my licence are stage there. but the same failing to active post upgrade.  Thanks in advance. 

Hello Experts, The Reporting Domain (v1) of Windchill REST Services is having errors responding to the /ReportTemplates endpoint. The query was running from long time for specific users and there are several errors in the method server log around that time.   We do not have any custom WRS domains. Noticed many errors/warnings like Delegate not found for selector/couldn't find the imported domain.   Since, Report Template represents Windchill object that is a saved query, that can be used to generate and run a query. The ReportTemplate entity represents Persistable information about report templates.                 Every Report template object is represented as an entity type in metadata with QML attributes as its Properties. Report templates are non-persistable entities. Report templates are auto generated based on the number of report templates that exist.   So, having below quest

how can I fix this:if (a )is less than zero the answer should alwyas be zero