Solved

I tried to find the maximum of the real function (n*p) but I failed. I used maximize and minerr commands. Where did I go wrong? What does TOL and CTOL mean? Thanks!

Hi Everyone,   I am having following scenario :-    One master page and one Mashup both I embedded into one (mashup having master page), where master having  there own customized Theme & mashup having there own separate Theme, when I am executing mashup (Runtime) then master theme influence mashup page UI (mashup page label, button , text box etc getting display as per master theme instead of mashup theme).    I know there is one property inside mashup named as "UseMasterTheme" which is Boolean one, I also Untick that property but still facing same issue.    Using Thingworx version 8.5.9    How I can resolve this problem & is there alternative ways to do this (having master & mashup different Theme & its work as independently like master theme only limited to master page component & mashup page utilized mashup theme only ) ?   Thanks in advance,  Shubham. 

In my Thingworx composer, I created an industrial connection, then I tried deleting it but failed. "Unable to dispose thing" always show when I delete it.  I then found I can only create but can not delete industrial connection. I used Administrator account. I googled this question but found nothing can help. Hopefully here someone can help.

Hello amigos,   I'm a noob in Thingworxs and Im trying to color a grid cell (variable value) using as reference his setpoint. Does anyone know how to do it? Formatting just allows numbers, or Is it possible pass a variable name as value?    Thank you in advance masters!

Dear all, we like to reserve one or more licenses for a specific subnet or a couple of computers.  We tried to add an option file to the mks daemon but it seems not to be parsed. Our license looks like this now:   # Do not change the following three lines#_PTC_CUSTOMER_NUMBER: xxx#_PTC_INSTALL_SITE_NUMBER: xxx#_PTC_CONTRACT_NUMBERS: xxxSERVER xxx xxxVENDOR MKSDEAMON MKS "C:\Program Files\FlexNet Publisher License Server Manager" "C:\Program Files\FlexNet Publisher License Server Manager\licenses\MKS\user_options.txt"   and in the user_options.txt file we put: RESERVE 1 MKSIntegrityManager-Float INTERNET 192.168.20.*RESERVE 1 MKSIntegrityServer INTERNET 192.168.20.*RESERVE 1 MKSIntegrityServer-DBBackend INTERNET 192.168.20.*RESERVE 1 MKSSourceIntegrity-Float INTERNET 192.168.20.*   But it's not working. Does the MKS daemon support FlexLM option files in general? Thanks in advance and kind Regards, Ulf.  

Is it possible to create multiple planar sections in a figure? I would like to show only the two ends of a pipe. I have attached a image that shows two planes (for visualization), the componentes between the planes are the ones I want to remove. I was not able to achieve this with the sectioning tab tools. 

I want to know the exact usage of Item type "Task" & "Change Order" ? Most of the fields are similar in task and change order types.   Thanks in advance.

I tried to create Postgres persistent provider to store stream and value stream data.  I am able to connect DB( checked using isConnected service) but not able to store and retrieve data, when I use the default service of add stream-entry I am not getting any errors. but I tried to access row count by calling GetStreamEntryCount then I got the error below-mentioned error message.      I am getting errors like this :  Unable to Invoke Service GetStreamEntryCount on Demo.Manual.STREAM : com.thingworx.common.exceptions.DataAccessException: [1,018] Data store unknown error: [Error occurred while accessing the data provider.]

Hello, I explain my problem to you:I need to make a 1: 1 scale plan template, the problem is that when my parts are too big, when I use my plan template, all my plans overlap (I don't know where is the left or right view) and I have to replace them by handSo I wanted to know if it was possible to be able to give a distance between the GABARIT_VUE?   I give you captures of what I imagine   (in the creation of the template plan)   (what it would look like with a piece)   Thank you so much Maxence

This will be my first script in ACL and I am having struggle finding examples that can be used to understand the language with respect to accessing the filesystem and performing processes on files.   No matter what I do - the below code I created and execute multiple times appears to perform different behaviors. Sometimes it has performed a replace on the Currently Open Document in arbortext, sometimes it does nothing, and sometimes it presents a message saying "0 new objects scanned and processed." but have gotten to the point where I know how to create ACL code which won't produce errors. Its just not doing what I think it should.    In my example the ultimate goal will be to replace all Unicode characters (en dash, em dash, curly quotes) with ascii characters (hyphen, straight quotes).   $EnDashChr = chr(8211)$EmDashChr = chr(8212)$LeftDoubleCurlyQuote = chr(8220)$RightDoubleCurlyQuote = chr(8221)   $filepath = "C:\\Users\\MyDirectory\\Desktop\\TestXML.xml"$

Hi Team I am working on showing data on graphs. I want to show below statewise population data on the graph.   State Population Missouri 9826732 Kansas 7838493 Newyork 2348890 Washington 332948   When clicked on particular state, user have to be shown population of specific county on another graph.   County Population Wandotte 8494 Johnson 892834 plaza 493784   Can you please suggest any graph that can be used for this purpose?    Regards,  

This is a weird one and I do have an open case with PTC but they want to close it. I had IT clone the virtual servers for Windchill and Oracle and then ran the Rehost utility with the Rename option on the new machines. Everything looks good and runs as expected.  Until.... I went to do an Oracle expdp backup of the new VM Oracle database. I entered the commands in SQLPlus to create the directory and point it to a folder on the machine. However, when I run the expdp command, Oracle is writing the files to the source machine disk and not the target machine. This is on WIndchill 11.0 M030 CPS16 with Oracle 12cR1. Anyone seen this or know how to tell Oracle to use the cur rent  host machine for the expdp files?

Good afternoon.   Could you give me a hand with the following doubt?   I have been working with property transformations in Thingworx Platform Analytics. I have an Azure VM with the following hardware configuration:   I have installed the following components successfully:   + TWX 9.x+ Analytics Server+ Platform Analytics+ Vuforia Experience Service+ Vuforia Studio+ Kepware   In the installation of the Platform Analytics, I configure the Analytics server integration, and all the installation steps run successfully as shown below:   Also, I followed all the steps to configure successfully the Property Transform Settings in ThingWorx, the RabbitMQ password encryption, and finally, I left by a defect the Property Transforms scalation.   Using a dataset I emulated a remote device with a Pressure signal. I used a timer to stream the pressure signal each 1, 10, 50, and 100 ms.   The pressure signal has the following form:     I created th

Any properties available to customise/styling confirmation dialogue box?

To upgrade, Thingworx 9.2/9.1/9.0 is best? and why?  Does Twx 9.2 have any legacy widgets or entities?

Hello,   is there a way to set an imported attribute from a CATPART for example as designated?   imagine I have "MATERIAL" parameter in my third part CAD model. I import it and convert to a PRT file, and I really would like that this MATERIAL attribute comes designated to be able to check in directly in Windchill!  

I have data's in a grid as a string type, want to do translate those dynamic data's, but have no idea to do this, Kindly assist me to do this if any options.

Hello,   Whenever I initiate an ESI transaction in Windchill, the status is immediately getting updated as "Succeeded" instead of going to "Pending". If anyone can shed some light on this, it would be very helpful.   Thanks, Sha

I am reading multiple csv files one by one. If one csv file not exists error occurred, the code stopped. Instead i want to move on to reading next csv file. So i tried try catch inside for loop only for ReadCSVFile method, but that doesn't worked. What to do.

Is it possible to set Calendar (select date) to start weeks with Mondays instead of Sundays? Meaning the Sunday column below would shift to the far right.    

I'm struggling to understand why there are two different ways to make XY plots in Prime 7 - one under the Math tab and another under the Plots tab.  What problem does this solve?   More specifically, I'm having two problems:   1 - When I insert a plot using the Plots tab, I can't find a way to put a grid on the plot.  This is an incredibly basic thing, so I have to be missing something.   2 - When I insert a plot component using the Math tab, I can edit the plot properties.  However, I can't figure out how to save the edited version so that it updates the plots on my sheet.  It seems to only let me save it as a figure file.  I have to be missing something simple, but I can't find it.   Thanks to the community for your help as I try to figure out Prime.   Mark     

Hello, I am using Creo Parametric 3.0 M150 and having some difficulty with a hidden part.I have a main assembly where a component in a sub assembly is hidden and I can not find a way to show it. The part is visible when the sub assembly is open. It is not on a layer, it is not hidden, there is no simplified rep substitution hiding it, the master rep is active, there is no family table, the appearance is something I can see. I am at a loss as to why this part is hidden. I have obviously missed a trick somewhere. The user who did this is no longer with the company. I am wondering if there is a tool not on the toolbar he used. I found he never used simplified reps and always chose to hide the component in the drawing.

 Hola everyone,   I was wondering weither there's a way to find out how long does it take to run a script inside a subscription ?   Thanks in advance

I have 100 rows in CSV File. I want to replace only one row. This snippet: Resources["CSVParserFunctions"].WriteCSVFile(params2); is not accepting one row as an input. Iam getting an error "JavaException: java.lang.Exception: Unable To Convert From com.thingworx.types.collections.ValueCollection to INFOTABLE ".  1. How to update only one row of csv file?   2. Shall i pass arrays tothe input data?  var params2 = {path: filePath2 /* STRING */,data: rowCSV /* INFOTABLE */,fileRepository: "SystemRepository" /* THINGNAME */,withHeader: true /* BOOLEAN */};Resources["CSVParserFunctions"].WriteCSVFile(params2);    

Hi, I build a DLL function and run well in visual studio debug and got the result as i want. But mathcad load into this dll and try to run this dll twice with different parameter. As below pictures, first, i load this dll twice with different parameter (INP_g_pow_acc) & (INP_g_pow_acc1), but got same result (this result is correspond to INP_g_pow_acc) second, i exchange the parameter (INP_g_pow_acc & INP_g_pow_acc1), also got same result (this result is correspond to INP_g_pow_acc1) Seem mathcad just load this dll once, how can mathcad run dll twice with different parameter?? Very thanks for your kindly support.