Solved

When using a Card, with a text window, the text window appears very small?  The text window works perfectly in an popup so it must be the card. Adding grid, also no effect.   See attached pictures.      

Hi All, i am new to PTC Integrity application. I want to integrate Windchill PLM PTC Integirty. Please share if you have any document or steps. Thanks for the help. Saravanan

Hi, Could anyone tell me, why I'm getting just one solution when solving, when there are cleary two? I already tried "solve, fully" btw.    

Good morning, At the moment I have to place a Target in the 3D Space to link labels, buttons and images to it. Without the target I don`t see anything on the HoloLens. Is it possible to interrupt the connection between a ModelTarget and the widgets, so that the widgets (labels, buttons, images,...) always are shown? At current time, if you look away from the Target, the widgets stay static at the target. I just want to display the widgets also, when the user don`t look at the target.   Thank you

Hi,   Is it possible to use the CWD variable to reference worksheets? Meaning instead of clicking on the 'Include <<' button and choosing the referenced worksheet file, to write something like: "CWD\Reference.mcdx" in the field next to the Include << button. I'm using Mathcad Prime 6.0.   Thanks in advance.  

Hello all,   I have some 3D model files stored in Thingworx Repository. Is it possible to load 3D model dynamically in Runtime ?   Thanks in advance   /VR

Hello, I am new to MathCAD and need some help writing a loop. I have done this in MATLAB before when I was in college, but it seems like MathCAD works a bit differently and I just can't figure it out.   I have two variables for which I am inputting to a starting value, say A:= 1.5 and Dp:=3. Then there are a few lines of equations that all use A and Dp, and eventually output a final value that I named Apercent. My goal is to have the program automatically increase the inputs A and Dp from their starting values until Apercent is at least 100.     My plan is to create a while loop that says "while Apercent is less than 100, A will increase by 1/16 at a time. But if I reach an iteration where increasing A no longer increases Apercent, stop increasing A and instead start increasing Dp by 1/16". But I can just not figure out how to write this in MathCAD. Can anyone please help me and show me the proper formatting?

There is a change from 11.0 to 11.2 in the Change Notice functionality that I need to see if anyone has figured out yet.  In 11.0 when I started a CN, there was already a Change Task available to edit while creating the CN.  When you edited this Change Task on the implementation page it would auto populate the Change Task Name to match the Change Notice Name.  Which is something that is a requirement here.  Now there is no Change Task, which you have to create a change task, which is no big deal, but it does not auto populate the name.  How do I get around this?  Do I have to create a template for the CN now?  But that doesn't make sense because that populates with whatever is in the template.

Anyone know why I get these warnings when I open assembly? It's not a one time occurrence. Creo 4.0 M020 WayneF

I have installed thingworx manufacturing application trail version.   Please provide steps to configure and how to open thingworx composer.      

I have to install Thingworx 8.5 on RHEL 7.6 with Postgresql and influxdb. I need to know where the data is stored and what size to calculate to create the file system and the corresponding partitions. My client asks me for that information. I will install as a user with few privileges. Thanks

I have a model with 2 sequences. Right now I switch between the sequences via a 2D select widget.    What I am trying to achieve is that if a choose one of the sequences a popup with a text will be visible and switching back to the first sequence the popup will disappear. I have tried different variations with no success and hope someone can help with see whats wrong. At first I have this code snippet:    $scope.$on("$ionicView.afterEnter", function(event) { $scope.app.view.Home.wdg['select-1'].value = 'l-Creo 3D - Standard View.pvi'           }); This to set which view is selected to begin with, also this is the view that I want no visible popup.    Then I have this code snippet which follows and make the function "sequencemode": $scope.sequencemode = function(){ if($scope.app.view.Home.wdg['select-1'].value = 'l-Creo 3D - Standard View.pvi'){ $scope.app.view.Home.wdg['popup-1'].visible = false; }els

Is it possible to change the dimension text showing pattern components?   For example, I want this annotation:    To become this:   The dimension text I am using is: "@D (&INSTANCES)"

Hi, I got error "Internal server error" when opening monitoring->ApplicationLog and click ,  no such error occurs if open other Log , for example: ScriptLog.    Please check the attached error.log.      Thingworx 8.5.1.   Postgresql 10.11, Windows server 2016   Regards, Sean  

// creating data table var createResult = Things[thingname].customCreateEntity({templateName: "DataTable" /* THINGTEMPLATENAME */,entityName: dtName /* STRING */,description: dtDesc /* STRING */,tags: undefined /* TAGS */});Things[dtName].EnableThing();Things[dtName].RestartThing(); //Now set the Datashape for this DTThings[dtName].SetDataShape({ name: dataShape });Things[dtName].EnableThing();Things[dtName].RestartThing();// Assign thingshape to this DT Resources["EntityServices"].AddShapeToThing({name: dtName /* THINGNAME */,thingShapeName: customThingShape /* THINGSHAPENAME */});Things[dtName].EnableThing();Things[dtName].RestartThing();  

Hi All, I need a litle help. I would like to solve that, you don't have to sign in every time, it goes automatically log in to user. So i would like to create a Mashup access without login. I tried with Mashup parameter: USER, and PASSWORD, but no success. It will also be asked to sign in. I tried with Application Key, x-thingworx-session=true, but the result is: you mustn't log in, but it goes with error. Am I missing something? Can someone help me? Thank you, Ilona

Hi,   I want to implement a customized toolbar in CREO parametric toolkit. I am using CREO 4.0 , M20. I have added  2 ribbons manually, when I tried to export , only  the .ui file is getting saved and  .rbn file is not getting updated . And also I am not able to load  .rbn file through RibbonDefinitionfileLoad() command. Does RibbonDefinitionfileLoad() requires CREO Direct license as well ?

Hello everyone,why the program, reported below, does not work? There seem to be problems with conditional operators. In fact the program on the right, where no conditional operators appear, gives the required result.I sincerely thank those who will find the error and all those who will try to solve it. Attached is the worksheet.

Hi, I'm trying to install the thingworx apps 8.5 , I need import "Cannot find ThingWorx-Apps-<version>-extension-dependencies " firstly according to the guide.  But I could not find it in whatever service apps or manufacturing apps in PTC Software Downloads.      Any suggestion ?    Regards, Sean    

I am following the guide here: https://developer.thingworx.com/en/resources/guides/foundation-linux-install-guide I set up the self-signed cert. I enter the initial configuration info and the installation starts and fails almost immediately with the error: There has been an error. Failed to install dependencies: Chef Client The application will exit now. I am trying this on an ubuntu 16.04 VM. I have Oracle Java installed: jdk-8u202 64 bit. Trying to install Foundation-Installer-Linux-8-5 obtained from the developer's site.   Appreciate learning what my options are to move forward.

hello everybody, i have a question: is it possible to place a subassembly in another assembly by placing differently subassembly part? for example in the pic below i would like to place the part on the left on a bracket and the part on the right on another bracket but i would like to place them differently on another assembly   thanks

Been fighting with this issue off and on for decades, and never really found a good solution...so I've always just winged it. Now that I'm starting from scratch on a new automation project in Creo 3, I figured I'd ask again.  🙂I have an assembly (think of a wall framing assembly)... that is made up of several studs with various embedded window and door frames. Each window and door is a configurable subassembly with it's own components. Although the wall is built as a single assembly in the end, treating the doors, windows, and other types of "holes" as sub-assemblies allows for some pretty complex configuration and automation...so it's integral to modeling this side frame.   Here is the problem..Door #1 for example has a it's own vertical post part on each side so that they can be lengthened or whatever. But, they may technically be the same part as other studs in the wall (or other sub-assemblies) unless the length changes. (Same description, same length, same part number p

Hello everybody, I wanted to ask you how to display the references (planes, axes, points) of a model made in Creo Parametric when I open it in Creo View.   Matteo

At the moment I trie to use Thingworx 8.5 + Manufacturing Apps + KEPServerEX 6.7   I want to publish MQTT Messages Thingworx with the KEPServer and the MQTT Driver (Not MQTT Extension).   I successfully subscribe the Data in Thingworx. I created the Tags in KEP and I see the messages from a MQTT Client (Node-Red) via the MQTT Broker (Mosquitto) to the KEPServer. In Thingworx I created with Discover the Thing (Remote Thing) with the Binding to the KEPServer Tag. Everything works fine and I see the Value in the Properties.   But if I trie to change the value in the properties i see in the event log from KEPServer: Warning MQTT Client Channel2.Device1 | Unable to write to address on device. | Address = 'thingworx+invalue'. In KEP the Client Access = Read/Write. if change it to Read only I get an error in Thingworx.   In the MQTT Manual I found: Reading data from a MQTT server (writes are currently not supported)   Bu

Hello all,   I have download WorxAlert extension from Marketplace. Link   In guide it is mentioned we can use 'SendMessage' service to trigger notification, but I'm not able to find service in extension entities.   Could anyone help me with this ?   Thanks in advance.   /VR