Solved

Hello Everyone,   I have created a Thing with 3 properties each taking InfoTable as Base Type. I have a Datashape with fields Timefield and Valuefield. I am able to display the infotable values in the chart.   What I want to achieve is, I need to display the infotable values in a GridTable below the chart widget as an explanation of what is depicted in chart. (Attaching the sample image with this) But when I am trying to bind the 'GetPropertyValues' service, I am getting a nested infotable with Grid entry as [object Object].   How can I add each individual entries into Grid widget from infotable?   Please help me with a solution. Thank you.   Regards, Airin

At a time Can we use two Different CAD Models in vuforia studio with 2 different sequences to run with the help Javascript? if it yes ...how?

Is it possible to change a solid part into sheetmetal, without loosig any face?

Hi all,Can anyone assist with  'Element Incompatibility' Issue?I have inherited a model featuring fairly complex extruded sections of a frame.I have checked geometries, interfaces and constraints in Creo Parametric 2.0 design, such that it allows me to enter Simulate with no error.However, when I try to AutoGem the model, I obtain the error below, for certain curves (edges).(Orange dot): AutoGEM has detected an element incompatibility across thehighlighted curve.  Adding points to the curve may help.In some cases, re-creating the curve and adjacentsurfaces may be required.Does anyone know if there is a technique I can use to try and remedy this incompatibility , and what may be the root cause?There does not seem to be anything fundamentally wrong with the design of the parts.I tried to create a Modal analysis, but would not run eitherAny adjustment to the parts would mean a significant assembly re design, but if I know which direction to go then it will be worth it.Maybe cert

hi, I am new using mathcad prime, I have a couple of questions that I would like to help me. I'm sorry for the writing or if you do not understand what I write, my English is basic.I was working the next function (see attached image) I would like to add the value of ΦPn_max and 0 to the end of the result of the functions ΦPn and ΦMn respectively, so that the graph closes with the y axis  

Anyone happen to know a mathematical equation that would represent data like this (an s-curve in a log-log plot)?  Excel attached. Thanks!  

Hello,   we developed scripts using WindchillConnector template services. Those worked fine with connecting to Windchill and getting data publishing on twx mashups.   Later I came across WindchillSwaggerConnector template. The REST API features seems to be powerful.   So I got few questions. Could you clarify these please ?   1. Why two templates with same " Windchill connection" feature ? reason ?2. Which template should be used in a long run project ? 3. Is there any framework or sample  present to refer on "how to use WindchillSwaggerConnector" more efficiently ?   Many Thanks!Rajesh

The tabsequence property on widgets seems obvious, but for some reason, I have been unable to get the tabbing order correct.   I also can find zero documentation that explains the syntax short of it indicating it's the sequence of tab order.   I have taken widgets and numbered them sequentially, but the tab order ( tab key ) does not seem to work.       Any suggestions would be appreciated.     

Hello,   I am wanting to change the color of my model but don't quite know where to do this in Vuforia Studio? I know Unity allows you to make a Material and then can turn that into any color you want to slap onto the desired model. I was wanting to know how can I change my model color?   Thank You,

I have a table table with a field called AcknowledgeTStamp. I need it to fill be filled with the current date/time on the click of a button and then set to null with the click of another button. I tried the code below for my acknowledge service on my thing. I can't seem to figure it out. Any thoughts?  var createITParams = { infoTableName : "", dataShapeName : "" }; var properties = Resources["InfoTableFunctions"].CreateInfoTableFromDataShape(createITParams); // create a row with data var row = new Object(); row.name = "AcknowledgeTStamp"; // name of your property row.value = 5; // desired value row.time = new Date(); // you can set any timestamp you need - important when using ValueStreams to log properties.AddRow(row); Things[""].UpdatePropertyValues({ values: properties });

I have a grid and I need the selected row to be highlighted with the press of a button and then un-highlighted with the press of a button. Basically I need When an un-acknowledged item is selected, make the “Acknowledge” button enabled. When the “Acknowledge” button is pressed mark the selected item as acknowledged (highlighted) and then refresh the grid view. When an acknowledged item is selected, make the “Un-Acknowledge” button enabled. When the “Un-Acknowledge” button is pressed mark the selected item as un-acknowledged and then refresh the grid view. Below I have my mashup (snippet1) and my ack/unack service right below.  

Hi , Can I set a localization token string with placeholder ?  like:  "The data is empty for the device {0}"  , {0} is the placeholder of the device name .  Then I can call the service of RuntimeLocalizationFunctions to get the complete string value.    I didn't find where to set the placeholder and the resource entity RuntimeLocalizationFunctions  seems doesn't has service to getting token with placeholder , either.    Do I have to implement the feature by myself ?    Regards, Sean

Hi Guys,   I have been trying to create a ValueStream through Edge Java SDK, couldn't find any solution how to create that. But i'm able to set the existing ValueStream to a particular thing using SetValueStream service.   Is it like ValueStream need to created while creating a thing itself or do we have any particular service to create a ValueStream explicitly.   Could someone please help it out.   Thanks in advance.

I want to have an individual design for the factoryConsole. So i duplicated the PTC.FactoryConsole and changed color and icons, but how can i assign this duplicate as the mashup that i wanna use now ? I tought this could be done in the config of the LaunchPointConfigurationThing but there's only the TitleMashup that can be replaced.  

Hello PTC Community, I am working on mathcad prime 5.0.0 and I have been facing an issue regarding the unit conversions. As you can see from the screenshot attached ('scrn1'), I have explicitly defined a variable "MGR" to have ft.lbf unit but when I print / display it, the units are automatically converted to its base units. A possible work around is to 'forcefully' change the units in the block where I have printed the result (refer to scrn2 and scrn3). However, I have not been able to find a permanent fix. I would appreciate if anyone can help me out. Thanks.

Hey Guys,   currently I have a Problem with the Model Target in Vuforia Studio. (My Model is a little bigger than  a car). When I try to track a specific part of my real model (It's a very simple square nothing complicated), my 3D-Model  shortly appears and disappears again. After this scenario I have no chance to track my real model again. I have to restart Vuforia View to see that short appearance again.   I also tried Thing Marks, which worked! But I would love to use a Model Target. I also turned these two things on 3D Container   Is my Model just to big? Do you have any Idea what the problem could be?   Any Ideas are appreciated 🙂 Thanks, Yasar

Hi Everyone,I have been using mathcad for some time but it is not until recently i started trying the Given / Find functions.However, every time i try it, it gives me "This variable is undefined" error right after i enter the Find(...) command and hit the "=" button.I even tried to follow the quick sheet in the tutorial/help document and it is still happening.Could someone help me out?Greatly apprecitated!Alex J

I've been trying to reference a widget the first time a view is opened, but when I do the console logs it as undefined. For a view, are widgets defined after the first time the js runs? Thank you

Is it possible to create bindings with js during runtime?

Who can I select items in widgets like "select" or "list" via javascript? I want to achieve something like, click a next button and select the next item in a list.   Can I somehow utilize the "clickitem" event, or simulate a click otherwise to select a specific item in the list?

We are having requirement of using windchill swagger connector (ptc-windchill-integration-connector).But we dont know how to invoke custom service in that connector for REST call,whether we need to write route or js service in that connector.We want output in the form of info-table. We tried as below but getting error :     var params = {infoTableName : "InfoTable",dataShapeName : "DataInfo"}; // CreateInfoTableFromDataShape(infoTableName:STRING("InfoTable"), dataShapeName:STRING):INFOTABLE(DataInfo) var result = Resources["InfoTableFunctions"].CreateInfoTableFromDataShape(params);// result: INFOTABLE dataShape: "DataInfo"result = Things["CDConnector"].Objects_Get_FindObjects({$filter: 'state eq INWORK' /* STRING */,typeId: 'wt.part.WTPART' /* STRING */,navigationCriteria: undefined /* STRING */,$select: 'objNumber,objName,version' /* STRING */});   But getting error as    Error executing service GetPobjects. Message :: Your route exchange has failed. HTTP oper

Thingworx Application is down frequently , It is taking very long time to respond.   This my Thingworx Application Log File   2019-07-08 14:47:00.161+0530 [L: WARN] [O: c.m.v.c.i.NewPooledConnection] [I: ] [U: ] [S: ] [T: pool-24-thread-1] [c3p0] A PooledConnection that has already signalled a Connection error is still in use!2019-07-08 14:47:00.161+0530 [L: WARN] [O: c.m.v.c.i.NewPooledConnection] [I: ] [U: ] [S: ] [T: pool-24-thread-1] [c3p0] Another error has occurred [ org.postgresql.util.PSQLException: This connection has been closed. ] which will not be reported to listeners!2019-07-08 14:47:00.161+0530 [L: ERROR] [O: c.t.p.p.PostgresModelExceptionTranslator] [I: ] [U: ] [S: ] [T: pool-24-thread-1] [message: [2,002] No connection. Contact the administrator.]2019-07-08 14:47:00.161+0530 [L: WARN] [O: c.t.s.s.f.e.ReservationReclaimer] [I: ] [U: ] [S: ] [T: pool-24-thread-1] Failed to get any reservations2019-07-08 14:52:09.654+0530 [L: ERROR] [O: E.c.t.w.Things] [I: ] [U:

Hi,i am using Creo Parametric 6.0 and changed some settings in the configuration editor. But at one point i am struggeling to change it to default. I wanted to change the geometry tolerance from "ansi" to DIN in the config file.After that i saved it added it back and restarted but it is still on "ansi" when i open the part preparations where i can select materials etc.But on the configurations it says it is DIN. Does anyone know why and how to solve this?  

In the 2D Canvas it is possible to switch the mobile devices. As I´ve got a Huawei P Smart, which is not available in the predefined selection, I´d like to use the custom resolution, but I´m not sure what measures to put in. The resolution that is given in the phone information seems giant comparing to the others... Could anybody explain me how/where to find these measures? (Or do I need them at all?)   Greets and thx

Hello friends! Does exist some way in JS which enable me to capture and screenshot of full or part of a screen? Then I will send created screenshot into the TWX.   My Idea is about creating application which will enable me to capture key steps in assembly as a proof of correct procedure.   Thank you for every idea.   Thomas