CAD

I am using Creo Parametric Release 4.0 and DatecodeM050We need to renew the following expiring licenses:NC-PRODUCTION_SETTool_Design_SETThese are expiring in 7 days.Thank you!

I am using Mathcad Prime Release 4.0 and DatecodeN/AWhen attempting to convert an old file it gives an error. I have ran the mcregister exe as it requests but also receive an error within the log file that it generates.Here are the errors that I facedThe conversion cannot be started. The issue may be caused by a previous version of mathcad on your system.

How do you find the serial number for my version of Mathcad 14. Thanks.

Hello friends, What is the function used to change the surface color using toolkit?

I have the following scriptSo, C is a vector with symbolic equations, and q is the vector with symbols. Now I would like to solve for q. However, that does not seem the work. Is there a way to make this work?

I am using Creo Parametric Release 5.0 and Datecode5.0.0.0I recent have a new laptop Dell Precision 7560 (graphic hardware NVIDIA T1200 Laptop GPU). experiencing Creo crashing during save or regeneration models about two weeks ago. The crashing be progressing day of day. At the beginning the crashing happened on different model from time to time. Since Oct 17th it started consistent crashing when tried to open the main assembly model. My Old laptop is Dell Precision 7510 (graphic hardware NVIDIA Quadro M1000M). I tested the same models on the old laptop. It's opened and running very well in Creo on my old laptop. So that means not the model with corrupted or other issue cause the crashing, But something else.

I am using Creo Simulate Live on an assembly.  I am trying to simulate bolted joints between the parts.  I think Creo is treating the joint as bonded because the stresses on the mating faces are constant, and I do not see any stess at the bolt holes.  How do I model a bolted joint?  I am using pinned connection between the mating parts.  I do not see an option in simulate live that tells me what kind of joint is assumed, and I do not see any option to change joint definition.

Dear expert facing the issue of trajectory 5 axis milling in normal to surface option the path is discontinuing. at normal to surface option .please check jpeg   regards   Asif fisa

Hello   when I created a repetition by reference in assembly, sometime i don't want to repeat the 1st. Is there a way to disable the 1st one ?    

Hello, I have questions. Can I change the color of one dimension in a drawing on a plot? I am modifying the part and I would like to show the changed dimension, e.g. in red. I use a Cre parametric 2.0   _________________________________________________________ Translated From Polish by Iuliana Lazar with Google Translate on 26 oct. 2022   Witam mam pytania. Czy można zmienić kolor na jednym wymiarze na rysunku na wydruku? Dokonuję modyfikacji części i chciałbym pokazać zmieniony wymiar np. w czerwonym. I use a Cre parametric 2.0

I am using Creo Parametric Release 4.0 and DatecodeM150When trying to create WTPart from Creo using Auto-associate function, it ignores the mandatory attributes of WTPart

Presenting different input choices:    

Hello Experts, When I am trying to use summation instead of giving one single value it is giving me table as output can someone please help 

Hi everyone, I have a multiple mapkey but every time I need to choose the same folder to save each mapkey... do have you a solution to save all the files in the same folder in one time?Thanks in advance my Mapkey : mapkey exp @MAPKEY_LABELexport fichier neutre;~ Command `ProCmdViewRefit` ;\mapkey(continued) ~ Close `main_dlg_cur` `appl_casc`;~ Command `ProCmdModelSaveAs` ;\mapkey(continued) ~ Open `file_saveas` `type_option`;~ Close `file_saveas` `type_option`;\mapkey(continued) ~ Select `file_saveas` `type_option` 1 `db_617`;\mapkey(continued) ~ Update `file_saveas` `Inputname` ``;\mapkey(continued) ~ Activate `file_saveas` `view_favorites`;\mapkey(continued) @MANUAL_PAUSEENREGISTREMENT FICHIER PDF\n1- CHOISIR EMPLACEMENT\n2- SAISIR NOM DU FICHIER\n3- CLIQUER SUR REPRENDRE;~ Activate `file_saveas` `OK`;\mapkey(continued) ~ Activate `intf_profile` `OkPshBtn`;\mapkey(continued) ~ Select `main_dlg_cur` `PHTLeft.AssyTree` 1 `node0`;\mapkey(continued) ~ RButtonArm `main_dlg_

I am using Creo Parametric Release 4.0 and DatecodeM100Hello, I recently renewed and updated two my licenses. I used the reconfigure tool and that seemed to work license check mark appeared and license said available. I closed and launched Creo, I had to re-register my server the old one was gone from before the license reconfigure. I put in the same server location and I get the error: server location is incorrect. I still have other users that are signed in using untouched licenses and there server location works works fine. and they can see all the folders etc.

I have downloaded pim_installmgr_mathcad.exe so when I try to install it shows extracting but does nothing.  Kind regards.  

I am using Creo Parametric Release 4.0 and DatecodeM120現在中国でノートPCにインストールしたCREOで作業をしていますが、リモートでサーバーからダウンロードしたモデルと異なってしまいます。ノートPCで呼び出したモデルはデーターベースのステータス項目に修正済みと表示され、日本のワークステーションはダウンロード済みと表示されます。チェックインは正常にされています。PC側で作業するのにダウンロードファイルはどのように変更すればよいのでしょうか？   I'm currently working with CREO installed on my laptop in China, but it's different from the model I downloaded remotely from the server. The model I called on my laptop shows as fixed in the database status item, and my workstation in Japan shows it as downloaded. Check-in has been successful. How should I change the download file to work on the PC side?   Translated by Iuliana Lazar with Google Translate on 25 oct 2022.

Hi, newbie here.As now, in midst preparing the power cable ampacity calculation, somehow, required loop calculation process at the end section. Here it goes.1) Assume the θsc (pic 1)2) Then several calculation in the middle to get the ampacity value. (pic 2)3) Once current (I) value obtained, the θsc required to be calculated as per red mark above. 4) When θsc calculated, it required to be linked and to be used as input in item (1) above (and so on until) the θsc in item 1 and item 2 comes with 0 difference.5) Calculation sheet as attached. Thanks. 

Hey guys,   Just start learning Creo. I now have a problem: In the instruction, instructor does a lot of right-click, will have a pop-up menu, as shown below. Mine will not show anything. Is there some setting?   How do I change my software? Or how can I define the angle between two lines? Thanks!

I am working on a drawing for a part (that someone else created) and there is a view that should only include an extrude being used for text.  I have removed all the edges from the view.  Everything looks great except there are two lines in the view that I can't select.  After some investigating I discovered they are being added by a round feature on the part (suppress the round the lines go away).  I still haven't been able to figure out how to get rid of the lines, not even sure why they are there. Any help would be greatly appreciated.

I  I want to add Copper material to the cylinder and aluminium for the box below. But when I do, the same material gets applied to the entire object.please help!!!

license transferOld network card address：6C-62-6D-00-2E-37transfer content：Creo parametric *1New network card address：00-BE-43-BB-EA-2E

Morning All,  I'm sure this will be a simple Q. However, I'm unable to determine how to set my simulation to apply a thermal conductivity through the model?  I've got two heat sources on the top surface of the model, 600W source each.  I'm passing a flow of air of a series of fan blades & thus want to determine the effectiveness of the fan blades.  When I set the simulation up - I am able to determine the effect of the heat source on the surface of the model however I think that the heat isn't being transferred to the fins in a method I would expect. My results can be seen below.  Streamline HeatTop down Model View Heating EffectFront On Heating Effect Temperature Effect This all looked promising. However, when I section the model, I see that no heat has been transferred through the model. I can confirm this through the streamline heat, see images below. Streamline UndersideHeat X-Section A little bit more of further

Hello,In mathcad-15,  Is there away i can get it to display yield mode (Z1m, Z1s, ZII, ZIIIm,ZIIIs...) that associated with or corresponding to the smallest value? For example, when ts=0.125, the smallest value is (198), so the yield mode (ZIIIs), and when ts=0.313, the yield mode corresponding to the smallest value (231) is (ZIV) and so on. Thank you,Sam  

Sorry for this basic question, it seems that I'm old and memory problems !!!I have a simble "box" that I would to unbend.Impossible to find anymore how to cut corners...I've done this many and many times in the pass !Several years ago...Very sorry !-(