Solved

HiCan anyone tell me why tp > (e-2mm) where:tp=20mme=22mmIt should be equal to each other!!!ThanksBest regardsWaleed Khalid

HI,I have a part that you can see below. I created 2 flanges and joined them together with a planar feature. It works great in the model. Now when I am creating the print, the bend line is a single bend line across the part, which makes sense since it really should be bent at the same time. However, I want to delete the part of the line that is going over the part that is not being bent because I'm pretty sure that at some point, one of my brake operators is going to see the line all of the way across and bend up the flat part too. I can't get two bend lines to show up, and I can't get the sketch features to snap to the line in the drawing. Any ideas on how to make two separate lines in the drawing?Thanks,BrandonThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include

Hey guys/gals,   I have had this come up before on rare occasion, but now it is in front of me here in Creo 3 so I wanted to lob it out to you all.   The system is supposedly going to break dimensions for you, or foreshorten them, automatically based on the drawing view boundary and all that. Basically when the dimension falls outside the view box, it should just appear as a double arrow on one side indicating the clip. Well I believe I have all the drawing options on clipping set to yes in the detail config so this should work, however the dims pictures do not seem to observe this setting and I cannot find a way to break them on my own. It's possible I guess that all my previous experience is with linear dims and not radius stuff, but that seems like a poor limitation because round parts are more likely to have an axis well off the page anyways.. but whatever. I did try the help and seriously, the layout and usefulness of that is as badly formatted as this forum. Actually I

how to design a pressure vessel according to asme code...?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I'm using the wrapper component, "dateInputComponent" to create date boxes on my forms. I need to make the initial value of the date box an empty string or a null value. I've been unable to do this because the component attribute "dateValue" requires a correct date. It won't take "" or null or anything that is not a correct date value. Does anyone know how to make this form field blank?This is not the same thing as a date attribute on an object that can be set to blank using allClients.xml or the JCA describeProperty tags for JCA tables. This is using the wrappers tags.<%@ taglib uri=http://www.ptc.com/windchill/taglib/wrappers prefix="w"%><w:dateInputComponent name="startDate" id="startDate" required="false" dateValueType="DATE_ONLYE"/>

I have an integral that won't converge to a solution for a specific set of variables (the solutions over a range of variables are sought). I've attached the whole worksheet and thus a lot in it isn't relevant to the solution so just skip to the bottom the find the error-riddled integral.Thanks in advance to anyone taking the time to help out.

Is it possible to create a minimize function comparing each entry of a vector to a single number and then outputting a vector with each entry being the smaller of the two valves? The attempts in the attached worksheets (Prime 3.1 and Mathcad 15) only find the minimum between the entire vector and single value instead of comparing them line by line. 

Hi All,I am new to this community. Forgive me if my question has been answered somewhere.I have a 2D data set, but the sampling points are not on the regular Cartesian grid.I would like to rearrange the sampling point by interpolation and generate a new table with Cartesian grid.It looks MatLAB or IDL guys use a function called “griddata”. However, when I make a surface plot or contour plot, MathCAD is interpolating the scattered data and making Cartesian data set. So the MathCAD already have something equivalent to griddata.I am wondering if someone know MathCAD function or routine which does something equivalent to griddata.

I have posted this question before but did not give enough information for an answer so here goes:I want to create a swept blend from a parallelogram to a rectangle as shown by the blue lines in the attachment. The lower line to sweep is a curve but the upper line to sweep is a straight line. I have shown this in the attachment:I am using Creo 2 in Windows 7 64 bitI haven't done this before and if possible, will the finished sweep be a solid and can I then cut it?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Our business unit director want to be emailed as part of a workflow but only when necessary.  Currently there is an email node that sends out an email to multiple users each time a document is created and run thru the workflow....is there a way to add a check box to the task page that when checked he would get an email, if not checked he would not get one?  Any other ideas on how to achieve this would be greatly appreciated. 

Hi to allI try to see bode and phase plot of flyback converter in DCM mode on MATHCAD 15After write equations i can see all result is ok.My problem is, i don't know how can i understand crossover frequency on 0db? I don't know which equation i can use to give this frequency?

I have searched but I cannot seem to find what I'm looking for...... If there anyway to create a simulation of building an assembly so I can show someone how to put it together? There is a component that requires multiple steps to get it into place due to clearance with other components.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I'm trying to create a macro that will select a fill by an RGB value (R:252, G:249, B:206). So far I haven't been able to get this to work, can anyone help? Please & Thanks

Hi,We currently have an internal user only Windchill PDMLink System and we now have a requirement to allow select customer users to securely access the system over the Internet. I intend to do this build building an additional Apache Server (Remote Apache Web Server) located in a secure DMZ on a hardened Linux server, with an updated Apache install. For security reasons, I intend to build a minimal Redhat Linux server to host this Apache Server, but I know from previous experience that it can be difficult to install & administer such a system if you don't get the minimal OS build right in the first place - too few packages and nothing works, too many and it's a security risk.Does anyone have any recommendations here - will the default Redhat Minimal Package Selection install be OK for what I need?I would prefer not to install all the Redhat Graphical System environment for security reasons, but is it even possible to run the PTC installer(s) from the command line?When it comes to A

Is it possible to use the minimum function to create a vector of the minimum line-by-line between of two or more vectors?Edited to include Mathcad 15 version

Hi,I have previously sucessfully setup a Windchill 9.1 Remote Apache server located in a DMZ (for external Internet access) that had no access to the Windchill Server's application loadpoint.I have just tried replicating this process for our 10.1 Windchill System and have found it does not seem to work in the same way.All the PTC docs refer to the Remote Apache server being able to see the Windchill Application Loadpoint, but this is not possible for a machine located in a DMZ.I have configured the remote apache server as per the PTC instructions and have created the dummy windchill directory stub on the apache server in the DMZ with a few of the necessary files that I knew about in 9.1, but this seems not to be adequate for 10.1.I can get the Windchill Server Status page values returned in a browser, so I am pretty sure Tomcat is working through to the server, but no other pages render - does anyone have any information on how to do this?Thanks and RegardsGary

In the attached Mathcad Prime 3.1 worksheet I am attempting to determine the valve of c such that the vectors Fs and C add to zero. This requires the use of vectors in the solve block, is this possible?

Afternoon All,I'm trying to get a total count of .DRW & .PRT & .ASM files on my system.We are currently using Windchill 10.1 with Oracle.My current method is by running these Oracle queries:SQL> SELECT count(*) FROM EPMDocumentMaster WHERE name like '%.asm';   COUNT(*) ----------       1568 SQL> SELECT count(*) FROM EPMDocumentMaster WHERE name like '%.prt';   COUNT(*) ----------       7055 SQL> SELECT count(*) FROM EPMDocumentMaster WHERE name like '%.drw';   COUNT(*) ----------        200 QL> SELECT COUNT(*) FROM EPMDocumentMaster WHERE authoringapplication='PROE';   COUNT(*) ----------      19487However I do not think these values are correct??In Windchill front end If I search for *.DRW I get over 2k results, but it wont display more than 2k so I cant use this as a reliable counter.How can I double check

I've been researching these forums for hours to help a friend.Last week, his Creo application lost the ability to see any of his mapped network drives.We've been able to manually go into the network and save certain folders to his "Favorites"However, we are unable to set a working directory.Every single time we open the program, it starts in C:\WindowsIt should be starting in S:\EngineeringI've tried adding this line to the config.pro file:file_open_default_folder working_directoryI've tried changing the shortcut path in Windows.Nothing works. Help.-RobThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

When performing a Classification Search, the following error message appears in the log file:2015-06-15 11:23:39,891 INFO  [ajp-bio-8010-exec-6] wt.system.out  - INFO: Configuration option resultsSortRowsMax not set. Refer to webSearchConfig.jsp2015-06-15 11:32:02,113 ERROR [ajp-bio-8010-exec-4] com.ptc.core.htmlcomp.components.TableViewBean wcadmin - Could not find configurable table with id: refineSearchTableDescriptorDoes anyone have an idea what could be causing this?INFO message when starting Classification Search and for every Classification Search action with search results::2015-06-15 11:23:39,891 INFO  [ajp-bio-8010-exec-6] wt.system.out  - INFO: Configuration option resultsSortRowsMax not set. Refer to webSearchConfig.jspERROR message appears for every Classification Search action with no search results:2015-06-15 11:32:02,113 ERROR [ajp-bio-8010-exec-4] com.ptc.core.htmlcomp.components.TableViewBean wcadmin - Could not find configurable table with id: ref

Hi..   I have created feature to measure dimension from analysis, now i got the feature parameter but i want to convert it to model parameter. so please can anybody suggest how to do it ?   Regards, Prashant PandarkarThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hi Friends,I had created a small assembly consisting of 10 cables and some conduits. In the drawing I had saved the support frames as draft entities.But later, I did not need one of those cables. So I deleted it. But when I did that, the rest of the cables move from their respective co-ordinates and position themselves at the wrong place.I assembled the model by co-ordinate systems (not by normal mates).Can anyone give me an idea why this is happening and how to rectify this?ThanksMaheshThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hi..Here we are facing one problem related to workflow. We are not able to open workflow in correct format. Very large view occurs when I open the workflow. Please find attached file for your reference.RegardsSujata

Hello, I am a student and new to PTC Creo parametric and design. I have a part with four large holes around the center I would simply like to fill in. I have not been able to do that so far and any step by step instructions would be appreciated. Below is the part with the four gaps I want to fill in. Thank you very much and I hope we can solve this problem!This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hi All, I am in the midst of upgrading to Creo3 from Creo2. The server machine is up and running, thanks to Alex. I was wondering if there was a script of some sort to uninstall all of Creo2 on my client machines in readiness for Creo3? Instead of uninstalling one module at a time?   It would save a lot of time for me.   Many thanks in advance.   PaulThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.