Solved

Hallo zusammen,ich habe das Problem, daß sich zwischen zwei 3D-Splins keineFläche einfügen (spannen) läßt.Bearbeitet habe ich die Geometrien mit der Expressversion V4.Welcher Geometriefehler liegt vor, daß dies nicht gelingt?Ich lege die Datei und ein Bild bei.Mit GrußWerner

Hallo!jeder von meiner Baugruppe hat einige Paramtern. Ich möchte sehr gerne in meiner Zeichnung von der Baugruppe ein Stückliste haben die die Parametern von die Teile enthalten. Ich habe im internet viel gesucht und was gefunden, dass ich die Spalten von Parametern an die Baume dem Teil hinfügen muss. Und dann an der Zeichnung, "Tebelle aus Datei" ancklicken und dann sollte ich suchen auf ein Zeichnung Tabelle in Bibliothek.. Ich habe aber dieses Tabelle Datei in meinem Rechner nicht. Diese Datei die ich bräuchte heißt struktursrk_a4q_alles.tbl Kann ich diese Tabelle irgendwo kriegen oder gibt es ein andere Weg dafür.Vielen vielen Dank.Beste Grüße,Edna

I have an evaluation copy of Prime 3.1 and the file converter crashes for me. Anyone know how to fix this?

I have a problem using the mksCommand structure using the MKS C API. I am reaching the server via Source Integrity (2009, build: 4.10.0.9049), and the environment is setup correctly, most commands works flawlessly. My problem arose with the createsandbox command, but it should be the same with every other command that uses a parameter like that (ci, co, for example), but I haven't reached those yet in my implementation. // This works fine mksCommand actcmd = mksCreateCommand(); actcmd->appName = (wchar_t*) L"si"; string e = GetSBPath(); // obviously this is an inside look into a much more complex application, but it does work actcmd->cmdName = (wchar_t*) L"viewsandbox"; mksOptionListAdd(actcmd->optionList, (wchar_t*) L"sandbox", wstring(e.begin(), e.end()).c_str()); mksResponse response = mksCmdRunnerExecCmd(cmdrunner, actcmd, INTERIM_CACHE);etc.However when I want to do the same for createsandbox, I have no clue how to use mksCommand for the last parameter, which would speci

Hello,I can't set the number to folders in common space!Thanks

I'm having terribly difficulty understanding how I can create a centerline on a surface so that sketches and extrudes cutouts can be made "in the middle".Maybe my starting point was wrong? This is what I've done:I've created a sold part by sketching the "base" to be 110mm wide by 300mm deep. My CSYS is the front left point.I've then extruded that sketch to be 45mm tall, so now my CSYS is at the bottom front left of the case.I now want to sketch some cutouts on the front of the case, and these are to be centered (so the mid point of these cutouts is 55mm offset from the origin of my CSYS on the X axis).Now of course I can create a vertical centreline that's 55mm offset, but the issue is that if ever I change the original width of the case (first sketch that was then extruded), I have to change my centreline.Is there not a way to create a centreline on a surface so if the dimensions of that surface change over time, so too will the position of the centreline?Would I be better off moving

Can someone help me with this loop? I cannot seem to get the loop working for the for statement

Hello PTC Community,I get this message: Cache has exceeded the target limit. Deleting workspace frames may help reducing the cache size.What does this message mean?Is there a way to increase this target limit size?Where to delete workspace frames and will that do any damage to any models or assemblies?Thank youThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I have a set of queries that are Admin queries and a shared to only two groups. One of them is NOT the everyone group. Why then when I login on as a user not in either of those groups am I still able to see these queries? On page 158 of the 2009 Integrity User Guide it says: 3 Click the Sharing tab. The Sharing panel displays.  Click Choose Principals and use the data filter to select the principals (users and groups) that you want to share your query with. NOTE  Only the groups you add to the Shared With list can see your query. 

All I have is Structure,Tag and Property.I am trying to Pattern something and tried to follow the tutorial with no luck.I do have a Model Properties however it is greyed out.This is an Academic edition which shouldn't have anything locked out. This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hello everyone! I m new in Creo 3.0 and need some help. I want to create a part. In that part I need to subtract one solid from another, let's say a cone from a cube. Is this possible on the same part file? Attached, a photo from a book to exactly show you what I mean.   This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hi guys I am still learning the ptc mathcad software. I am trying to use trial and error to find the solution of depth (Y) in open channels using mathcad solver block. I have set all guess values and constraints, how best can I solve this? Or is there another way of determining the value of Y. I have also attached the original question with step by step calculations and correct answers, in case one needs to restart everything. I appreciate your input and comments. Thank you in advance.

I have the following fairly simple equation. When I use the solve it say no solution was found but I can iteratively find a solution myself?

FIrst let me say I am new to PTC Creo but I have used other CAD programs such as Inventor.We recently obtained an EKOCYCLE 3D printer and were looking for things to do with it. I found a model of Falco from Star Fox as an .STL and showed it to my mentors who told me that I should see if I could remove the gun from his holster and replace it with a wrench. I did that though a combination of Meshmixer and Meshlab. Afterwards I was told that I need to remove the disc from his other hip. The STL is linked below and I can attach other files if that will help.http://www.thingiverse.com/thing:652635What I am trying to ask is can I import an stl to a solid part? If so, How? Also, what tools and commands help me work on meshes?Thank you in advance. Side note: I am trying to use this as an exercise to learn Creo as our team plans on switching over later this year.

Hello, guys.Is there a way to get the local path of a sandbox based solely on the Configuration Path of the project? I know about the si sandboxes command but this returns the project name, not the configuration path of the project.Thanks is advance.

Is it possible for Mathcad Prime to integrate a piece wise function? In the attached worksheet I am attempting to integrate a piece-wise function 4 times. If possible I'd like to be able to create a graph of these functions and then pull values from the graph.

i better do math than talk in english.D:=42L:=41C:=5C:=(D-d)/Lcan i get the value of "d"?(yes, can be done even mentally, but how you do it in mathcad?)

Hello,With the im viewissue command I can easily get the fields and the names of a "test case". I get the fields and the values like on the GUI, for example Title and Content. The problem is: there are more Title and Content fields in the system. If I run the "im exportissues" with the --fields=Tittle,Content, I get the other Title and Content fields. Where can I find the real names for the fields?Thanks in advance!

How to check family table Instance & generic using modelcheck ?

In my application I need to check if the user is logged into the PTCI can check the process (si.exe) and conclude that PTC is running. But I cannot verify if the user has logged into PTC.Is there any batch file to check if user is currently logged into PTC.Thanks

Does anyone know if locked licenses of Arbortext Editor can be used globally or are they tied to contracts like concurrent licenses? Thanks,

Dear all,I am trying to figure out how the system administrator can configure the same setting among multiple Arbortext Editors.For example, In Arbortext Editor, Tools > Preferences > Preferences dialog box > Advanced > Acvanced Preferences dialog box, there is a preference named "newlist. How would you share the setting values of this "newlist" among multiple users? And how the system administrator configures it?FYI, I have already tried on the environmental variable "APTWCF" but it was not suitable for this purpose, because it also shared unnecessary values in Tools > Preferences. I look forward to your reply.Kind regards,Tomomi

javascript:; RTRT   Message was edited by: Qian Wan

Hi, everyone,Suppose I have a 13 by 13 matrix, (shown in attachment), what I want to do is to extract its 4th-5th, 7th, 9th-10th rows and columns to create a 5 by 5 matrix.So far I only know that the function "submatrix" works with extracting consecutive rows and columns, so how to extract non consecutive rows and columns?Looking forward to hearing from you,Thank you very muchBest Shawn

Hey. So in my Computer Methods class we have to determine a least squares quadratic fit from given data points. I basically just followed an example he had in the book. I can get the right answers by hand but for some reason my mathcad values aren't evaluating correctly. The f(xi) values are supposed to be very similar if not the same as the yi values. That way the regression line fits with the yi plotted values. Someone please help? Thanks.