Solved

Can someone provide me with detailed documentation on the process that Implementer uses to promote Physical Files? I am very interested in how it handles the optimized promotion process. Our shop currently handles the promotion of physical files to the Production environment manually by running CL conversion programs to add/remove triggers, add/remove journaling, and saving/copying of the data. The general feeling is that the Implementer process is not fast/efffecient enough so I would like to review what the detailed Implementer process does.

Hi AllIt is possible set Custom Tabs on startup of Creo Parametric? - see picture:Note: configuration option: web_browser_homepage set only one tab (it is possible set more tabs? Can also be permanently turned on.)Thanks, Vladimir

Hello, We recently moved to WF4 from WF2. In WF2, if I clicked on an existing feature in the model tree, RMB, Edit Definition, I was shown the planes dialogue box on the way to editing the sketch. If I wanted to, I could change the sketch plane, or the reference plane at this stage and 'Done' out of it. In WF4, RMB, Edit Definition takes me straight to the sketcher edit screen, bypassing the planes dialogue. Is this a feature, or have I missed setting some config option? I know I can RMB, Edit References and do it that way, but it is less obvious that way.   I have scoured the WF4 config options list, but I can see no obvious candidate.   I welcome your advice.   WF4, m220   Thanks, JohnThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what v

I HAVE 4 PRO-E LICENCE. (CREO-element/ PRO-5)now1) I WANT TO OPEN ONE OF THE PRO-E FROM ABOVE2) AFTER THAT I WANT TO RUN my MAP KEY ( For e.g. Map key name - XYZ )AUTOMATICALLY......... (with the help of BAT file or VBE code)if any one know, then please share your knowledge. it will help me alot. (2nd point is more critical for me)

Hi everyone, I don't know what's happening to me, but when I think I know how Mathcad works, I'm not able to do a simple thing.Mi problem today it's that I'm trying to do an "else if" statement but again, for some reason I cannot figure out how to program it. I've searched through the forum but I don't know how to fill the part that is missing (see image)Again, if someone could give me a hand with this (I'm going crazy) I would appreciate. Thx in advance.

could someone help me to solve it? thx for your help

Hi AllI have a problem which I think could be resolved with BMX but having never used it I thought I would see what you all think.We are trying to package a few hundred cardboard boxes within the smallest volume for shipping overseas. The boxes are of different dimensions but all 6 sided (square / rectangle) great for a family table. Obviously the boxes can be stacked in 3 different orientations and different permutations to fill the volume, also some can only be placed in certain orientations due to contents - For some reason 3D tetras springs to mind. The engineer is manually placing each box in an assembly until he gets it right but to me this is working harder not smarter. As I said I have never used BMX before so wonder if tis sort of thing can be doneThanksDave This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic"

Hello all,I'm trying to recreate a part in Pro-E Wildfire 4.0. I've attached the .prt file that is from a step file. How can I make my own in pro-e using one piece of sheetmetal? I've tried just about everything but to no avail (deformation area, mirroring, solid-convert to sheetmetal, just sheetmetal, etc.). If you have some free time and would like to try and figure this out, please let me know how to do it! I'm stumped and very short on time with this project.P.S. It has to be able to convert to a flat pattern so we can get this manufactured.Thanks,SamThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Is there a way to configure Arbortext 6.0 M070 to insert relative paths in hrefs? Currently, it inserts full absolute paths with drive letters. This is killing our publications pipeline.We have a large team of globally dispersed authors using SVN to share and maintain content. Their file structure is consistent within maintained content, but it's impossible for us to know what drive/folder they check out content into.

So I'm trying to do some simple math and it's not agreeing with my calculations. I'm doing some simple multiplication and division and it's giving me a negative result. I'm wondering if the unit conversions aren't quite right? I'm attaching the file so if anyone can offer some input, I would appreciate it. I have two equations side by side that show what MathCAD is giving me and what the simple multiplication and division SHOULD give me.

Hey everyone,I am performing some numerical integrations in MathCAD 13 and I was wondering, since it takes some time to compute, is it possible to split up the integration and assign seperate cores to evaluate each part in MathCAD 13?In other words, is multithreading possible in MathCAD 13 and how is this done?thx,rubseveni

If you open a new document in Arbortext and select "Arbortext XML DocBook V4.0", the empty document presents several "placeholder" texts for title, pubdate, corpauthor, street, and so forth (see image)How can this placeholder text be generated in styler? Whenever I style an element and it's empty, there is nothing displayed on the editor.

For some reason, MathCAD is telling me that it needs to be in wierd temperature units when I'm not designating any units anywhere. I still have the same problem when I cahnge T to something like Temp or T.RKIt's highlighted in dull pink at the bottom.

I am fairly new to Creo so bear with me. Say I sketch a spline on one datum plane and then start a sketch on a perpendicular datum plane. I want the spline that I sketch on the second perpendicular datum to be coincident with the point on the first spline that insects the second datum that I am currently sketching on. I cannot figure out how to do this. I tried using the Reference button to make the first spline a reference for my second sketch but it doesn't seem to work. I can never get the cursor to snap to a point on the first spline. Any suggestions?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hello,I am attempting to create content using a javascript trigger command delta.createContent. When doing this, I get an errorMKS124701: Field "Contains" may not be set. It is a solution managed field.I am working with Integrity 10.3 with ALM solution.Does this command work? Is this error due to the ALM solution? Is there a way to make it work? Is there a setting that will make it work?Regards,Mark

The unit of density is kilogram per cubic meter, which can be written askg/m^3orkg__m^3MathCad uses the bottom method for display, is there any way to make it show how it is typed above? I ask because I prefer it like this asit looks neater.I saw no such options in the Worksheet Options.

Hi,So, I'm trying to use the given/find function to find the temperature of a substance at a given pressure. I have my equation for pressure as a function of temperature. I can type values in manually to get really close to what I'm looking for, but MathCAD keeps telling me there is no solution. The area of question is highlighted in blue. Thanks,Sam

This drawing was made with Catia. We remodelled it in Pro/E WF5. We are not able to create a cross section like in the drawing.How can we create a cross section like below. E1 - E1   This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hi everyone, I'm having lots of issues with one program I'm doing, and I would like to ask if you can help me with one in particular.I'm trying to pick up a number from a vector compare it with some value and then do an iteration, but for some reason Mathcad doesn't let me pick up the number from the vector.I'm trying to do:but it seems that I cannot use this kind of statement in an iteration.Thx in advance.PS: I'm Spanish so excuse me if my english it's a little bit rough

Attached is a steam flow pressure loss calculation. I broke it down into three file. Please make sure your mathcad has internet access becauseThermodynamic Properties of steam flow is based on IAPWS-97 mathcad server . I really appreciate the authors effortYou probably has to rework the file reference in the "steam head loss PartIII " to point to the other filethe reference of viscousity calculation can be found in the mathcad fileThe fanning friction factor is simply a find(f) of the colebrook-white equation thanks to the power of mathcad, dont we all love that?. I would like the community effort to check the validity of the calculation (I only check a few result and it seems to be matching table/graph value of steam pressure loss)You can go to "steam head loss Part III" to change the pressure, temperature and piping data. Feedbacks are most welcomed!The file only works in (and hopefully it works):0<T<800C, P<100MPa and 800<T<2000C, P<50MPa because that's the range o

Hello,if I have set of variables such as:a0=3 , a1=5 , a2=6 , a3= 9 , a4=2I want to creat a matrix such as:n= number of rows,if I put n=3, the matrix will include a0,a1 and a2 only, the result will be like this:M=[3 5 6]if I put n=4, the matrix will include a0,a1,a2 and a3 only, the result will be like this:M=[3 5 6 9]Thank you in advance.

I'm trying to get a macro to select callouts but get errorsThis is a little macro that illustrates my problemmacro test_me define me as MouseEvent define el as element me = Wait MouseClick Select at me.ptmm.x me.ptmm.y Direct el = ActiveDoc.FirstSelectedElement MESSAGE el.typeend macroWhen run this macro just displays the selected element type - "Line" or "Bezier" etc.But if you click on a callout it gives the following error message:Macro: Error in expression syntax."MESSAGE el.type"Anyone have any advice?

Hello All,I have 3 vector for X, Y, Z but I am unable to create a 3d surface plot or contour plot of this in mathcad prime 2.0I have read somewhere that is is not possible anymore but maybe there is a way to do it.many thanks for the help.

Hi, I am trying to install windchill 10.1 M020 with MS Sql Server2008 R2 as a Database.I have successfully installed ms sqlserver 2008 r2 with named instance.Then while Installing the Windchill using psi Solution Installer I'm getting the error.I have added the screen shots of my psi installer and the error dialog box.I have added the hostname,Instance name,Port number correctly I hope.And I'm not sure about the SQL Server DNS Registered Host Name so I have tried with the server name with instance name,my system name anyway it giving the same error.Also I have checked my sql server also It is working fine.I really don't know what the problem is.Please find the attachment and any help will be useful for me.The following is my errorFailed to connect to the database. Please check the login credentials (Hostname, Instance name, Port number and User connection information).*SQL Server DNS Registered Host Name:Installed SQL Server Instance Name (Named Instance only):*TCP Port Number for SQL

There may be a simpler way to do this. If so, enlighten me.I am making a detailed view (actually of a detialed view - but I digress).I would like to make detailed view B to be sectioned (showing cross hatching) through the centerline of the screw but I can't seem to do this.But I can make a general view, but it then doesn't have the detailed view circle.Thanks,Dale