Solved

Mathcad Prime 11 is ok with the units of atm and psi but has issues when trying to use bar and kpa in all but the SI unit system.   Why does these pressure units only are valid in SI unit system? For example, I get the following error messages when in CGS unit system: "This variable is undefined.  Check that the label is set correctly." When I switch back to the SI unit system it works and removes the error message.

Hi, Lets say I'm running an interference check on a large assembly, or saving PDFs of my 200 page drawing...something that takes time for Creo to process. I used to be able to open another session of Creo to work on other things, while the first was thinking... but now that we moved up to Creo 11, I am no longer able to do this. I have to wait till the first session of Creo is complete before using another session.  Is there a config setting I should be looking to change? I know in Creo 3 it had something to do with the embedded browser in Creo,  Figured I would ask here first before making another ticket to PTC. 

Good afternoon i'm using a creo parametric 11 version, i'm trying for my drawing to populate the "code nr." and some other parameter as shown below automatically.For example a code can be "202500001_11" i want to manually apply che 202500001 code only on the main .asm parameter and use the same code also in all the .prt drawing on the repeat region.Actually i write this code on the relation of all the .prtDESCRIZIONE_ORDINE=DESCRIZIONE_ORDINE:1NOME_PARTICOLARE=rel_model_nameDISEGNATO=DISEGNATO:1ORDINE=ORDINE:1CODICE=CODICE:1DATA_CREAZIONE=DATA_CREAZIONE:1QNT=QNT:1And it works, but i cannot save this code in the start part of the .prt because of that ":1" that refer to the .asm and it does not exist in the new .prt.for the "_11" i'm using matching code like this and it workd perfectly also on the start part IF rel_model_name=="CAV_M"NR_PARTE="_11M"Can someone help me with the main code ?Thank you for your time and help.

Is there a better way to create tab and slot plate connections than manually drawing every line? I hope there is some technique where a tab can be replicated arrayed and then slots automated in the mating part. Boolean cut works but with this I don't have the option for clearance or dog bones. 

Resources["ContentLoaderFunctions"].PostJSON调用大模型接口，短回复没有问题，长回复报以下错：javascript service. Message ::Read timed out。请问是不是系统又限制？在哪里可以更改配置？

Hello, We run Kewpare 6.16 on a VM Hyper-V for long time. The old system was Windows 2012 R2 and we use Kepware to feed our own Software using OPC DA communication. This system was running quite fine. After we migrate the VM to New Hardware our software is dying on resources on the system. After troubleshouting we found out that the request from our Software (Multi Clients) via Kepware to the Data Server are not responded in time. But looking at the Task manager of the system we could not find any issues. Processors, Memory, Disk and Network are showing no issues. the new hardware is comparable to the old hardware.When we disable the Kepware Service on the computer the system is running fine and is responding timely, but starting the communication with Kepware let the system dying of resources. It seem the requested are not answered timely. When starting only one or two clients the system is reacting correctly but with more clients started on the system the system getting slo

Version: Windchill 12.0 Use Case: A user changed the revision of EPMDocument, as well as the associated WTPart, but forgot to take the WTDocument at the same time.Description: Hi,A user changed the revision of the 3D models and drawings, which changed the revision of the associated parts, which is normal.Unfortunately, they did not collect the associated documents, which also need to be revised and associated with the new part revision.We are now with parts with the new revision associated with documents with the old revision.And there are a lot of them.I am therefore asking you how I can, for a large number of parts, dissociate, for example, revision A from a document and replace it with revision B (without the part taking on a new revision)?With loadfromfile, I can associate revision B, but I end up with both revision A and revision B associated with my part. So I need to dissociate revision A, or is there another solution? Hence my question.And to go further, what are the param

Hello,  Whenever I print to pdf, the point constraints result plot lose part of its resolution, making them close to unreadable. Is there a way to increase the font size of those particular fonts bigger? I have tried playing around with these config parameters with no luck: default_ui_font 10text_height_factor 40.000000model_tree_font 10

In CREO cabling I have 8 cables going to one location in a flat grouping.Is there any way to re-organize the order of each wire in a flat grouping at a location?   For example, in the images below I would like the red and black wire to stay in the same order as they come on the right.The final result I'm looking for is pink on top, then green, red, blue, black, white, light blue, white.This would be accomplished by moving red down 2 spots and black down 4 spots in the flat group.  Then it wouldn't look like all the wires are crossing over each other. Using CREO 8.0.0.0 on Windows 11.   

I have entered 5 queries to the Knowledgebase this morning and they have all return just a blank page. Is there an issue for others with the Knowledgebase or is it just me?  

Hi,  I’m looking for help with a formatting issue in the footer of the attached document.As part of our design submission, we are including various calculations in the appendices and would like them to appear in an orderly manner. For referencing purposes, we’ve attempted to include the appendix number alongside the page number in the footer of each calculation (see attached example).Could you advise on how to align the formatting so that there is no visible misalignment between the appendix number and the page number? I am using Mathcad Prime 10.0.0.0 Kind regards,Iain 

I am using Creo Parametric Release 7.0 and Datecode7.0.9.0From one day to the next, the path for "pro_format_dir" and "start_model_dir" which are properly configured do not seem to work anymore.When starting a new part or assembly, it does not provide our start model.Same thing for the drawing, does not list our format.Here are the errors that I facedNo error, it simply does not bring our custom start_model and format

I can't seem to consistently get the Read/Write Default User Account when I need it.  Any thoughts on what is grabbing it or how to find out what User has it?  Much less a way to boot them off and wrest control.

Is there something in Options I am missing or I have to create a separate feature to open it? See Attach. ...Thanks in advance.  ---------------------------------------------------------------------Always finding hidden gems in Creo!

Licencia para 30 dias de prueba

Hello,I’m trying to linearize this type of curve using the simplest possible function: I tried many kinds of fits, but none of them worked.Do you have any idea how to do that?thank you, Emilien

Hi Community,We recently upgraded our platform to ThingWorx 10, which includes new AI capabilities, and I’m looking to better understand how these features can be utilized in real industrial applications.For additional context, we are using ThingWorx 10 together with SCPA 164, so I’m also curious about how these AI features align with or enhance SCPA-based solutions.Specifically, I’m interested in learning:How the new AI/ML features in ThingWorx 10 can help improve or optimize existing applicationsWhat use cases these AI features are intended for, and where they provide the most valueHow other developers are integrating or embedding AI into mashups, workflows, or analyticsBest practices, architecture guidance, or known limitations when using AI features in ThingWorx 10Whether any extra configuration or supporting components are required, especially when working with SCPA 164If anyone has hands-on experience with the AI features in ThingWorx 10 or has already implemented them in product

Hello folks,I'm a new user for Creo Schematics (specifically using Schematics Lite 12.0) and I've been trying to modify the sample catalog into a broader Template for my org to use, but I'm having trouble actually saving the Template file such that any of my changes actually stick. My workflow is as follows:Open an instance of Schematics and load in the sample catalog. Delete the provided design explorer sheets.Modify the sheets in Catalog Explorer (simply swap the PTC logo and address for my company's on the A3 sheet, for example)Save As to an RSDT file.Having done that I would expect that when I open a file and point to this newly created Template, the A3 sheet should have the logo and address but it doesn't.What exactly am I doing wrong? The documentation on Schematics is sparse.... Cheers,Boris

Version: Windchill 11.2 Use Case: Hello, I am looking to see if its possible to add the iteration number in the file stored in the representation;. We downloads the PDFs and steps files thru so it would be helpful to have the iteration also showing to reduce the chances of mixing up.Description:  

Thingworx: 9.3 KepWare 6.18Some Industrail Things can not connect to KepWare. The Industrial Gateway is set. All other Things are receiving data and everything is fine. Only 5 assets won't connect again. 

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.3Business Rule- Attribute validation ConfigurationtExample :Set of Attribute -Subtype of Part1Set of Attribute- Subtype of Part2How to Load the Business Rule For these Case

Is there a way to add custom menus or buttons to the tracker page?I would like to execute a custom action when the menu or button is clicked.If such a method exists, please let me know any reference materials or help resources. 

Hello All,I have attached MC-P11 sheets. How can I  extract the segment lengths values "L" out of last iterations of this following function. There are two conditions as you can see in subsequent calculations:                            1. For Element B in Compression, comp="B"2. For element C in compression, comp="C""L" values can be different or same depending on above conditions  and  segment lengths.Regards,Sam

Version: Windchill 13.0 Use Case: I have managed to ensure that users have to provide text in the "Comments" field for all workflow tasks in Windchill. I achieved this using the method detailed under the "Instructions for Windchill PDMLink 10.0 - 12.1" at https://www.ptc.com/en/support/article/CS35488?source=search.Description: The issue with this solution is that the solution applied to all workflow tasks. I would like to be able to only apply this solution to workflow tasks that are generated as a result of them being produced from a certain workflow. The article found at https://www.ptc.com/en/support/article/CS35488?source=search includes a function that is added into the custom.jsfrag file. I was wondering if it would be possible to include text in this function that will result in the result I am looking for. For example, some sort of "If" condition that checks the "Process" attribute value of the workflow task to see if it matches a certain value before apply

I just installed Creo Parametric Educational Edition 11.0.0.0. I am getting a black drawing screen. I am using a laptop (Specs- 12th gen i7 & Nvidia Geforce RTX 3050Ti)