Solved

Hello,I am trying to program my listboxes so that the selections appear as they were last saved. Using "Saving the state of controls", I was able to do this for most for the listboxes. Howewer, one of them will not save its settings. The listbox which will not save has an input from another listbox and I'm assuming that this is where the problem is arising.Attached is a trimmed version of my program. The listbox titled Thickness receives an input from Cross-Section, which affects what is displayed in the Thickness listbox.I would appreciate any help in solving this issue.Thanks,Carl

I have an improper integral that's discontinuous at 0. I need to evaluate from 0 to infinity. Also, the infinity should have units of length, because I'm integrating over the entire wavelength spectrum. How is this integral evaluated? I've attached a sample of my work, reduced to a simple form. I tried a limit and a few other things, with no success. Right now, I'm just truncating the improper ends of the integral domain, but there's got to be a more elegant way to calculate this integral. I've used this forum before with great success. Like always, I appreciate your guy's time in helping me understand how to better use PTC products. Kindest regards,,

I've used Autodesk for a year or so and they have this really handy tool to measure distances between models. I was wondering of PTC had a tool like this, and if so how to use it.

For example, I'm trying to place bearing blocks on a robot's frame. Having the program automatically record how I placed the first block usefull, but it gets extremely laborious when i have to place 8 of them. Or placing bolts and screws which are dotted all over the frame. On professionaly made models, i've seen bolts put into groups and I was wondering about more information on that kind of thing. This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

In order to display side-by-side layout(one side figure and one side steps), we have shown <info> images using XPath string(ElementContent), But if the image is crossreferenced somewhere in the paragraph then the cross-reference link is not working. After the analysis i found this link doesn't work because of orignal image content was hidden and display using "ElementContent".Note: In the PDF link was created but the link is properly targeted.Is any other possiblities to enable cross-reference for this kind of scenarios. Could you please guide me on this.

i download prime 2.0 this morning,but i found that there are no program debugging function(trace and pause)?am i correct,or i did't find it?

Hi...Can someone tell my why I can't use solver together with programming tools? Or show me a solution?I have attach a file with the problem.Thank you...

when you cut through a model using the visibilites function it shows the cut as red. In Creo I am having a problem with old proe models showing the cut as if the model were a quilt. no red. just open or clear. very difficult to see. I was told it was a graphics problem but im thinking not. anyone have any ideas??sometimes you can step it out and reopen and visiblities will work properly. but that does me no good for some projects. thanks for any help.Daryl This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

hi guys and girlsi need some help in starting to make a model of a car design for uni. I need to choose a car and then design it in PRO E,the car i have chosen is the bugatti veyron. However im not sure where to start from. I was thinking of using the trace sketch under style, and then using extrude (pad), however that doesnt seem very sensible as i would not be able to get the curves.................Thanks This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

So, i'm trying to assemble two parts in ptc. A hex bearing and a hex shaft. But from I can see, there is no way to "insert" the shaft or mate the edges together in order to move it into place. When i try that it simply rotates the part. This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hi All, I want to layout a wiring diagram of my starter and charging circuit for my 83 Honda Magna. The components are as follows:Alternator > ??? (3) portsRectifier / Regulator > Control Module (8) portsSolenoid > Relay (5) portsStarter Motor > ??? (1) portIgnition Switch > ??? (5) portsStarter Switch > Push Button Switch (4) My question is do I have to design new artifacts that have the physical charactics of the above components that I placed the ??? beside or can I use an existing artifact. I am modeling the frame and placing the modeled components in their correct locations. I want to bring in the XML file into my frame assembly and auto-route the wires.TIAThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product yo

I would like to store in the worksheet a nested aray generated by a program in the sheet, to avoid the recalculations which are no longer needed once the data is generated. I tried to assign the array to a variable using cut and paste but this was flagged by a "Matrix too big message" (The array is 100 x 5).What would be the way to permanently assign this Array to a variable?Thank you.

Copying and pasting the angle sign is getting a bit annoying.ThanksJoe

Howdy folksEE freshman here, just a few basic questions.Phase shift as used in the cartesian to polar conversion uses the complement of the angle in the second and third quadrants (ie when the real part is negative). How best to do this?Where is Hz and Hza originally defined? I can't see it in worksheet options>unit systemHow best to implement functions like In fact, is the angle symbol even in mathcad? I can't find it.Thanks much in advanceJoe

This is rather minor, but I was wondering if anyone knew how to change the highlight color of a listbox in Mathcad. By default it is a shade of baby blue, but this conflicts with the rest of my color scheme.

hi，everyone，i am a chinese，and my english is not good，this is my first time to communicate with others in english，i hope you can understand what I mean.i have discused these questions on other branch，but still can't solve them，so i put it here for more help，the link address of the previous discussion http://communities.ptc.com/thread/37201?tstart=0Now，i have a lot of problems in my work.i want to fit the experimental data using the mathcad built-in function Minimize(also,i tried Minerr).the function is known，there are 56 parameters in this function,i want to find them by making the objective function to be minimized.but when i run it,it takes a long time;also,when i change the guess value from 100 to 0，the result change as well.So,my problems are:1,how to reduce the time(do not change TOL or CTOL)?2,the result must be Local optimum,and how can i find global optimum?3,the mathcad built-in function(minimize or minerr),can i see how it works,or the inside result?(i know the trace function

I have matrix A with n colums and 1 row and matrix B with 1 colums and 5 row an i need to multiply first element from matrix A with all elements from matrix B,second element from matrix A with all elements from matrixB,........ n element from matrix A with all elements from matrixB, and at the end result will be matrix C with 5 row and n colums.How cand i do this?Help me plsi attached an mathcad file with what i meen.sorry for my english

Hello World. I am using a solve block in MathCAD 15, and it does not close around a constraint that a cross product of two vectors have a root of zero.In this solve block there is some matrix algebra and some that functions, such that a vector (R0) starting out at one orientation, after two bounces (in two mirrors rotating on two orthogonal axes), ends up in another defined location. There are two mirror positions (alpha1 and alpha 2) which satisfy these conditions completely and uniquely as long as skewness of the initial vector is 'reasonable' for the physical arrangement (e.g. under 30 degrees). The clocking may be anything. In this example it is set at 90, which drives alpha 1 to the exact value of 45 degrees.In this set of equations, when the root of a cross product between the vector between the last two points of the vector chain (a point of reflection off the last mirror and the destination point) and the unit vector for the reflection off the second mirror, is solved such that

On my calculatur, this is so easy, so way can't I get this right.Is there any standart way to solve I can use when I am not solving a x,y funktion?Mathias.

Hello, My term variable is an array that contains only 0 while yet I say: My intention is to set the pulse durations in a table. Where is my mistake? thank you

HiMy query seems very trivial compared some of the mathcad files i've seen but i've searched everywhere for a solution and i just can't work out what to do. I'm trying to find the displacment solution of a structure using an implicit integration method. Where i'm having trouble is setting up a loop to solve for all time steps. I've been looking into trying to set up a for loop but have zero experience in programming. I've looked at all the help docs for programming but still can't work it out. Any guidance/help on what i should be doing would be very helpfulThanks

Hi,I have a drawing in which I want to show an isometric view of a gearbox.I want to hide one of the castings to show the internals so I can insert a balloon to identify some of the components.If I use a combined state or a simplified representation I can achieve the view I want but It won't allow me to display the balloons in that view.I know it;s possible to achieve the result I want because I've seen it in another persons drawing.(who's now left the company).Any suggestions please?ThanksAndrewThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hello I can not use MathCad because I have a problem with the vendor daemon it is not being read, this is what is happening...License file(s): C:\MathCad Licence\lm_41980836.txt (lmgrd) lmgrd tcp-port 7788 (lmgrd) Starting vendor daemons ... (lmgrd) License server manager (lmgrd) startup failed: (lmgrd) File not found, __PTCD_PATH__ (lmgrd) License server manager (lmgrd) startup failed: (lmgrd) File not found, ptc_d.exeSo where I can find _PTCD_PATH_ and ptc_d.exe,I think the route is not good---------------------------------------------------------------------------------------------------------------------------------Vendor daemon status (on ISSAC): ptc_d: The desired vendor daemon is down. Check the lmgrd log file, or try lmreread.Vendor:Host: ISSACLicense path: 7788@ISSAC;FLEXnet Licensing error:-97,121For further information, refer to the FLEXnet Licensing documentation,available at "www.macrovision.com".Please is very important to install MathCad

Hi AllDoes anybody know where I can buy a good book on Advanced Assembly Modeling?I will take anything from WF 3, 4, or 5 new or used.TIAThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.