Solved

HiHow to change the dimension of the model without changing the versioning scheme in windchill ?Later the same model will be check into windchill

I am getting error as too many initial conditions in ode solve.I attached the code below.can anyone help me.Thank you in advance.

Hi , i make a calculation of steel beam in Mathcad 15 ..and I dont know is there a function for pictures to show picture which i want.... for example I got steel cross-section HEB picture and I want to change it for UPE or something..I dont want to change it manualy everytime is there ani integration with some picture program or how can I do it?? thanks

Hi Experts,1) We are facing some issue while calling java class from ACL. From one of the menu item of Custom menu we are calling Java class but we getting error message like a) [A30134] Can not find the java class com.XXX.XXX.XXX..b) [A30133] No Java class for the object could be found.2) We provided our all classes in custom/classes folder and mentioned all the jar files in the classpath variable. But still problem is existing.Environment details:Arbortext editor 6.0 M010Arbortext PE 6.0 M010Could you please help us.

I'm new to the software and made the mistake of saving "All" everytime I made a new mapkey. I now have a config file that is 177,026 lines long. I've tried opening it up in a text editor and working on it but the way it's written out the file is very difficult to manage.Is there a trick, tip, or tool to help clean this mess I've gotten myself in?Thanks in advance.(I did a search but some of them were a little out of date or didn't address the possibilty of a tool or method to help.)This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I get the error noted at the bottom. How do I resolve the error message below? I've attached my MathCAD file. Thanks-

Hello everyone.I find myself trying to calculate the calorific value of natural gas based on the application of a series of equations described in Rule AGA in its report No. 8. I doubt in the interpretation of these equations, especially in how I handle values of "SC" because I get an error.Thanks in advancePD. Attached a spreadsheet.

Hi Good Morning,Can anyone explain me the procedure to import .IGS extension type parts/assembly in Creo 2.0 ?Thanks & Regards,YogeshThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I would appreciate any help this community has on the following...I have a model I am trying to detail, but the cut out portion of the model is showing unwanted lines in the drawing. I can hide the cutout feature in the model tree, but this is a temp fix. Any suggestions?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I don't want creo to add files into my documents folder, how can I change the default location for the working directory or where creo puts the trail files that it creates?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Beim Hinzuladen von Teilen zu einer Baugruppe ist die Ausgangsposition immer extrem weit von der BG-Position entfernt. Dadurch ist ein umständliches Positionieren des geladenen Teil mit dem Copilot oder mit einem 2. Fenster erforderlich. Gibt es einen Trick, wie man das geladene Teil direkt auf einen Geometriepunkt positionieren kann?   When loading a new part into an assembly, the original position is allways very far away from the assembly position. Therefor it's necessary to reposition the loaded part by Copilot or by using a 2nd window which is rather awkward in each case. Is there a possibility to position the loaded part directly on a point of the assembly geometry?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you a

I have created a simple rotating disc and a small mass (a block) and I want to sit the small mass on top of the rotating disc and apply friction, so that when the disc reaches a ceratin angular velocity the mass will slide off .How do I constrain the two together so that the block is almost free and that only the friction between the two components holds them together?Thanks.

Error message - New object "Assembly - 1901065.asm" has the same filename that already exists in the database in a restricted context. In order to upload this object, you must update this object in the workspace I sse that 1901065.asm is not present in the commonspace. I am not sure whather it is present in other product. Can anybody help me in resolving this problem? Thanks and Regards, Ranajit

Hi everyone,I have a pdf file in winchill. I put some note and mark ups, after that I save it. I want to know where is the annotation set save file path? how/where to open that in windchill.Thank you,Luar

I am using Creo 2.0 Parametric for building an FTC robot. I have already designed a wheel but when I put in the center axle hole the check mark is grey and won't let me apply the changes. Any suggestions?

We have checked in a part to our windchill server, but when we click the "open" button in creo, the part is still displayed in the workspace. It seems to be that the local workspace in creo and the workspace I can see using windchill are not in sync. I have attached some screen shots to hopefully explain this better.This is where we checked-in our part. It is clearly not in the workspace, according to windchill.Then we click the "open" button in the upper-left corner, and the part still pops up.Our main concern is with big complex assemblies, certain components may not check-in later, which was more or less our problem last year. We made a few mistakes when handling windchill last year and we want to make sure that this is not one of them.Thanks,Trevor A. BabbFTC 8521Hard-Hitting Hardware Hooligans

Hello everyone,I have been trying to figure out the existence of any cell merge/split feature in Epic. However, I do not see any such option available in the tool or in any of its supporting documentation. Can someone please guide on Epic's support for such feature (which I am guessing there should be, as Epic is believed to have all the MS Word abilities mapped into its environment).I have come across another forum thread which states the below navigation for spanning/unspanning table cells:TABLE--> SPAN CELLS (ALT + F11)TABLE--> UNSPAN CELLS (ALT + SHIFT+ F11)However, none of the above seem to be enabled on my editor. I do not see them appear in my table menu bar options either.Please guide whether it's possible to perform these operations on a table and if yes, how?Thanks in advance,Pooja

What is the best way to get the PTC logo for placing on our FRC robot ? Are there Logo stickers available from PTC ? also is there CREO 3.0 logos ? Thx

Hi,   I've been using IsoView 7.3 as an Internet Explorer plug-in to view CGM, TIF, etc. images.   I found on IsoView datasheet that it also supports pvz file format. So I included a pvz animation on a webpage, but IsoView only shows an empty frame.   The TIF images display properly on this same page, though. Please see the two screenshots.   Any help will be much appreciated!     Viewing TIF:   Attempting to view PVZ:  

I am running into the following error message (see below) when attempting to export a Workflow. Others have worked fine, but this one will not work... Any ideas?

HiFirst off I have used gear connection as opposed to a cam follower.I have my output angular velocity but I also need the output Torque and I don't know how to analyse this?Thanks for the help,CameronP.s it has to be done in Mechanisms (not Simulate)This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

i created a part model in creo educational version.but i can't edit this model in creo acadamic edition. even i can't open a model. what can i do?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

How do you import a sketch (a sec file) into creo parametric 2.0.

The first section of my programme is fine where it shows the progression of infection after every cycle however its this next part i am having a problem with. I am trying to see how the percentage of immunised population affects the final amount of infected people however I am having some trouble as to varying the immunised percent (x) in my programme loop. I only need to display the infected for the final stage of the loop not after every cycle which I have managed to do for a specifi x value however cant seem to get it for a range of x values from 0-1 at 0.01 intervals. Any help would be appreciated.in the long run i also want to average this out over a certain amount of runs. In otherwords i want to creat a matrix to hold the amount of infected population against the immuised percent x while varying that x value from 0-1. I then want to repeat that for say 1000 cycles and plot the average.

Hello,anyone knows whether there is a keyboard shortcut for switching from the graphic model area to the model tree in the right column? (instead of using the mouse).(I only know there is a command, the key Q, which hides/shows the right column... there must be also one to do this switching...)thanks