Solved

Version: Windchill 12.1 Use Case: I want to add data utility on custom table's column. I will use some backend logic to render the attribute value as per my requirementDescription:Entry to show "area" attribute in table builder classCustom xconf entry for data utility for "area" attribute: Debugging table to see datautility for "area" :  

Python which got installed during API installation is 3.10 and having vulnerabilities.We need to upgrade Python, will it support? if not then can we just upgrade API.Whole Kepware Application version upgrade supposed to be last option for us.

Hey everyone, I just signed up for the Student License, but unfortunately, the license file came without any information on how to proceed with it. I saved the file under Programme Data /PTC/Licensing, and added the license path in the setup wizard. But when I open Creo, only the free test version gets opened (which does not work either, because the embedded browser couldn't be initialized). I tried to use the product key of an old Creo version (4), but this does not work for Creo 12. Could anyone help out with the product key for the student license of Creo 12?Thank you very much!Best regards, Julian  

We are using Creo View 10.1.0.0.  I am trying to learn how the two compare tools work (geometry and view state).  I cannot determine how Creo view decides where to place the Compare Report [annotation set].  Sometimes it puts it in the first picked iteration, sometimes it puts it in the second picked iteration.  I saw a video where someone actually had the iterations shown in the primary panel, next to the part file name.  Unfortunately, ours does not show this info.  Is there a way to show it? I was thinking if I knew which was which, I might be able to determine where the report gets saved.

I am using Mathcad Prime Release 9.0 and Datecode9.0.0.0Hello,Clients are unable to open Mathcad, error -61 Cannot read license file data from license server system.Deemon log shows:No such feature or vendor does not exist: ptc_d13:37:53 (ptc_d) SLOG: FNPLS-INTERNAL-CKPT113:37:53 (ptc_d) SLOG: VM Status: 413:37:53 (ptc_d) SLOG: FNPLS-INTERNAL-CKPT513:37:53 (ptc_d) SLOG: TPM Status: 013:37:53 (ptc_d) SLOG: FNPLS-INTERNAL-CKPT613:37:58 (ptc_d) THSVRSYNC: Not a valid license server system host. Exiting.13:37:58 (ptc_d) daemon shutdown requested - shutting down13:37:58 (ptc_d) SLOG: Summary LOG statistics is enabled.13:37:58 (ptc_d) SLOG: FNPLS-INTERNAL-CKPT113:37:58 (ptc_d) SLOG: VM Status: 413:37:58 (ptc_d) SLOG: FNPLS-INTERNAL-CKPT513:37:58 (ptc_d) SLOG: TPM Status: 013:37:58 (ptc_d) SLOG: FNPLS-INTERNAL-CKPT613:38:04 (ptc_d) THSVRSYNC: Not a valid license server system host. Exiting.I've tried restarting the lmadmin_ptc service and tried replacing the license.dat (the old license.dat e

Hello community,I would like to know if it's possible to create a nested condition formula using a Derived Tag in Advanced Tags in KEPServerEX. Something "Condition ? Value_if_True : Value_if_False"The idea is to retrieve certain tag based on a tag value, for example:plc1secuence == 1 ? plc2tag1 : plc1secuence == 2 ? plc3tag1 : -1 Tried using IIF statement as well but it doesn't like it either... Looking forward to hear from you.Cheers,

Hello, I've been facing an issue for quite a long time. I have a GE VersaMax CPUE05 PLC connected to my PC by Ethernet. I configured it in KEPServerEX 6, the driver I used is GE Ethernet and it works great just like that. But the problem comes when i connect to the server in factory i/o.There is a big latency of about 2/3 seconds when it comes to tags update. I read the threads here about latency but none of them helped me. Scan mode and maximum bytes per request don't change the delay, it is still there. I have about 160 variables most of them which are boolean. The only thing i noticed is low amount of good reads (at least i think so) compared to writes. You can see the good reads after the first 10 seconds of simulation on the screen.The problem I also noticed is even if there were 3 variables in the project there was still a tiny lag when it comes to the variable update. Could this be the VersaMax Ethernet port? It is only 10Mb/s.  

Hello Kepware CommunityI am currently tinkering with the KepServerEX capabilities and have come across some unusual behavior. My task is to connect the Kepware to an MQTT server, retrieve the payload, and parse it into SQL. Everything goes smoothly if I use Kepware's default logging, which has 4 fields: numeric_id, quality, time_stamp, and value.It is ok when use a Narrow table format setting, which I set it as follows.And it return this sql tableNow I have a custom table that need to be fillAnd my column(s) set up, they have the same column registerThe logger is up and running, no error log but it does not log anything to the table.Which setting that I need to change ? Many thanks in advance. Have a great day.Best regardsTran Duc Thinh  

I have set up a simulator tag that receives its value from the link advance tag. The input of the link advance tag is the value from the ADAM READ-only Register address, and the output of the link advance tag is the simulator tag value. I have configured the link tag as the on interval mode, so that after every 100ms, link tag writes whatever the value is at the register address to the simulator tag. but the question is, even if the value is same after 100ms, is the update counter on the OPC client side should update its value or not ..?

I have a Prosoft PLX51-DF1-ENI card connected to a PLC5 via  a DF1 serial cable. I need to get a Factorytalk SCADA and Kepware to communicate to the PLC. Kepware is required to allow comms to an old historian. When Kepware is disabled the Factroytalk SCADA can communicate to the PLC OK. But once Kepware is enabled the Factorytalk comms start to fail.. In Kepware I am using the Allen Bradley Ethernet Driver and the tags show good values. I have the tag scan rates set to 1000ms. It seems like to Kepware connection is overloading the DF1 comms. Is there anything I can try to get this to work 

Warning OPC UA Client OPCUA_Hydraulic_Shop | Reconnecting server due to connection loss.

I am developing an application using OPC DA, but my client wants us to upgrade to OPC UA. The problem is that when the HMI reads the tag structure, it is different. With OPC DA my structure uses dots (.) to separate the path, and in OPC UA it uses backslashes (\) to separate the path. This has never happened to me before. Could you help me?

Hello,I'm trying to make an "If" statement on Mathcad 15 that is able to pull a value for Alpha based on the Exposure Category assigned (B, C or D). I did this on Mathcad Prime (see snip) but having problems replicating it on Mathcad 15. I defined exposure earlier as " E = "B", but when i try to type the if statement it says "Cannot understand this syntax". Any help is appreciated, Thanks! 

Hey!So for my industrial desing  class i have to calculate the force on a crankshaft.I made the formula's but i cant seem to get my graph. I think my Phi is not a vector but i dont know how to fix it.  I tried using another word for it  and other things but nothing works. any idea's? thansk a lotI use mathcad 11

SW2022 SP5 -WGM 13.0.1.0 and Windchill  Release: 12.0.2.23 how do/can I map Windchill template folder path in Solidworks ?Windchill path is a url path ?our creo9 path is defined as:template_solidpart wtpub://pdm.covidien.com/Libraries/CADStandards/Templates/MNav/startpart__mm.prtthanksRich

Hi All,We are using Creo Parametric 11.0.5.0As part of our migration from Creo Weblink to CreoJS, we are using the following Weblink code to display messages in the Creo Message Log: Existing Weblink Code:function printMsg(msg){var texts = pfcCreate("stringseq");texts.Append(msg + "\n");try {var glob = pfcCreate("MpfcSession");glob.GetCurrentSessionWithCompatibility(2);g_session = glob.GetCurrentSession();g_session.UIDisplayMessage("usermsg.txt", "USER %0s", texts);} catch (e) {}}In Creo Weblink, we used below code for pfcCreate but for CreoJS this is not needed:function pfcCreate (className){if (pfcIsWindows())    return new ActiveXObject ("pfc."+className);  else if (pfcIsChrome())     return pfcCefCreate (className);  else if (pfcIsMozilla())  {    netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");    ret = Components.classes ["@ptc.com/pfc/" + className + ";1"].createInstance();    ret

The Knowledge Base Search page returns a blank page. Is there an issue for others or is it just me? 

Hello guys, I am facing an issue with the ProUIDialogCreate API returning PRO_TK_GENERAL_ERROR when a dialog creation DLL is invoked from another DLL. When the same DLL is executed independently, ProUIDialogCreate returns PRO_TK_NO_ERROR and the dialog is created successfully. Note: The ProUIDialogCreate call is implemented inside the user_initialize() function.if anyone knows the solution, pls let me know.regardsAraivnd

I am installing Creo University edition and I entered BK120908EDUNIVERSITYED under sales number order or product code. It didn't go through and displays ERROR in red.

I'm very new at compound surfaces. I'm using Creo 9 and I'm trying to create a surface from a sequence of curves shown in the first few pictures. In the past I've been successful with using boundary blend to get a basic surface that I need.  However this case is more complicated than normal in that not only do I have 2 directions of curves I also have an outline it needs to extrapolate to.   The next picture is a successful boundary blend in one direction (it fails when I try to add in the secondary direction curves) but as you can see it spills out over the perimeter in some locations and doesn't fill in the perimeter in others.  To be honest I'm not really sure how to add in the perimeter curve as a constraint. This next picture is the closest I've gotten to a fully filled in outline by selecting the curves in the other direction from the picture above and adding in a selection of the perimeter.  The result as you can see is not desirable as th

Create the contour plot in mathcad prime version 11 / API 650 TANK NOZZLE ANALYSIS WITH 30mm PAD // Mathcad Prime Worksheet // Date: 2024 // ============================================ // 1. INPUT PARAMETERS // ============================================ // Tank Geometry D_tank ≔ 80.0 R_tank ≔ (D_tank ⋅ 1000)/2 // Shell and Pad t_shell ≔ 30 t_pad ≔ 30 t_total ≔ t_shell + t_pad // Nozzle DN ≔ 24 D_nozzle ≔ 610 d_nozzle ≔ 584.6 r_nozzle ≔ (D_nozzle + d_nozzle)/4 // Material Properties S_shell ≔ 163 S_nozzle ≔ 118 // Loads F_axial ≔ 15000 Mx ≔ 300000 ⋅ 1000 My ≔ 300000 ⋅ 1000 // Pressure P_total ≔ 0.1602 // ============================================ // 2. BASIC STRESS CALCULATIONS // ============================================ // Membrane stress with pad σ_mem_pad ≔ (P_total ⋅ R_tank)/(2 ⋅ t_total) // Original membrane stress (for comparison) σ_mem_original ≔ (P_total ⋅ R_tank)/(2 ⋅ t_shell) // Stress reduction percentage stress_reduction ≔ ((σ_mem_original - σ_mem_pa

Hi,How would you use an Emergency ID in a disaster recovery scenario? For example, let's say you lose access to the server where Kepware was installed but have backups of the project available and have re-installed it on another server... seeking clarification on how you would handle the Emergency ID and Activation ID in this scenario.Also, is the Emergency ID available for re-use an unlimited number of times so long as it is reset and the original Activation ID is still active?

Hi all, Many of you I think attended the What's new in TW10 webinar yesterday.The debugger in particular looked like something we have been asking for a long time, which is very good news.I have been trying TW10 since june but have not experienced any good usefulness with the debugger.Even though I placed several breakpoints in the code most of the time it does not break there. Is there a difference if you place them in JS functions or outside? Shouldn't be?The information shown in the Variable section is most of the time useless. It shows 'com.thingworx.types' for instance on InfoTables.80% of our mashups are showing grids of InfoTables. These tables are populated from parsing Windchill REST services JSON data, and this would be EXTREMELY useful so use the debugger for this.What am I missing? Anyone else found the debugger useful? If so, care to explain? BR,Roger

Hi everyone,I am a user of CREO Parametric 12.4.0.0 Academic Edition.I created a quite complex multi assembly model and, while regenerating it (Operations > Regenerate), I get this message saying that some reference loop has been created. : 1 CIRCULAR REFERENCE LOOPS FOUNDLOOP # 1Depth of loop is 4Feature number 26 (COMPONENT, id = 78) in model ASM07-Z-PLAMA-HEAD refers to:Feature number 7 (COMPONENT, id = 44) in model ASM07-Z2-ASSEMBLY refers to:Feature number 4 (COMPONENT, id = 40) in model ASM07-Z2-ASSEMBLY refers to:Feature number 26 (COMPONENT, id = 78) in model ASM07-Z-PLAMA-HEAD - circle closed. I understand what a Circular Reference Loop is, but I am not able to locate the features and/or  components, based on the information given in the in the message.  So my question is : How can I highlight the components and feature that create this reference loop ? Thank you for any help ! Yves

Hi Community,I’m using ThingWorx 10.0.0 and working with high-frequency properties named property1 and property2 that update very often.If these are marked as Logged = TRUE, they generate a large amount of history data and can impact system performance.Proposed ApproachBefore I implement anything, this is the strategy I’m considering to log values only every X minutes:1. Keep original properties unlogged (Logged = FALSE).2. Create separate periodic properties (Logged = TRUE, DataChange = ALWAYS).3. Use a Timer to write values to these periodic properties every X minutes:me.property1_periodic = me.property1; me.property2 = me.property2;This would store history only at fixed intervals instead of every update.Looking for SuggestionsIs this a good approach?Are there any built-in features or alternative strategies for periodic logging that I should consider before implementing this?I’d appreciate any recommendations or best practices from the community.