Solved

Hi All,   I've been working on getting this Azure IoT Hub Connector started for a while now, and it finally seemed like it was going to work however, when I enter the 'azure-iot.bat' command there's no output in my command prompt but the connection server appears in my ThingWorx platform.  While the command prompt is open, the cxserver file grows rapidly.  Then, if the command prompt is closed the connection server disappears from ThingWorx.   Is this normal behavior for the connector? Everything I've read says it should start to process data after entering the 'azure-iot.bat' command but I get no output in command prompt.  The images contain the different errors I am getting in my cxserver file.  

My scenario is that my kepserver is in local timezone and Thingworx instance is in UTC timezone. How can I get the difference between the timezone in Thingworx so that I can convert the date time in machine timezone itself.   With regards Yedukrishnan U

Spoiler (Highlight to read)   Hi,    I have a trial version Thingworx of 3 months installed on my computer. I downloaded and installed Httper APP on my smartphone and I´m trying to send information to thingworx via REST API but I can´t connect to Thingworx and the error message is: "Cannot access to the URL, check your connection and service provider" I have connected smartphone and computer in the same network. IP Computer= 192.168.1.22 IP Smartphone= 192.168.1.24 Port= 8080   This is the URL, headers and body: Request method PUT URL= http://192.168.1.22:8080/Thingworx/Things/DataLogger/Properties/Temperatura Headers= AppKey= b2245650-d77e-4f8a-8dbb-4acbabf85230                  Content-Type => application/json                  Accept =>application/json Body= {       

Wie kann man Dezimalzahlen, Dualzahlen, Oktakzahlen in Hexadezimalzahlen umrechnen und umgekehrt?

Hi,   In the same way as adding streamlines from Creo Flow Analysis(https://community.ptc.com/t5/Studio/How-to-add-streamlines-from-Creo-Flow-Analysis/m-p/563464 Where the streamlines are exported from Creo Flow Analysis), I wonder if it is possible to do the same with structural analysis. E.g FEM visualization in Vuforia studio. (Like this: https://www.youtube.com/watch?v=5ACqirpuxvk). I would like to visualize the structural analysis using AR.Cheers,Martin  

Hey everyone, I am currently using Thingworx platform 8.3 and i need to upgrade to 8.4, i have gone through the document but i have a bit confusions in downloading the files from support site and upgrading my licensing.       Regards, Deepak Rahul   

Hello everyone   I can not find the solution M of the attached equation. (mathcad 15) [undefind] is displayed.   Please give some advice on what this means.

I'm modelling a Haack Series Nose cone. The nose cone equation for the curve is:   This is the equation for the datum curve that I have in Creo thanks to the people who helped me in a previous thread where I could not get the equation to draw near the bounds: R = 49L = 560z = ty = ( R / sqrt ( PI ) ) * sqrt ( ( acos ( 1 - ( 2 * t / L ) ) ) * pi / 180 - sin ( 2 * acos ( 1 - ( 2 * t / L ) ) ) / 2 )x = 0.0 So here is the problem: zooming in where the observed segment of the curve spans about 10 mm of length, there appears to be a small concave segment and the tip seems to blunt abruptly: The gradient should always be decreasing, yet by visual inspection and the curvature analysis tool, we can see this is not the case.   This is how the shape should look:   I've attached an excel plot of what the values should be for the length of the cone. Creo more or less agrees with the numbers until it gets within less than 20 mm of the tip where the concavity and weirdness starts ha

I'm on Creo 3 M130   There have been plenty of times in the past where I've used the patterns "dimension" of "&P#" (i.e. &p2) to show how many cuts etc. a feature has on drawings.  It USED to only give the integer (i.e. "8").  It seems with some upgrade of Creo since the old version I was using (Creo Parametric/Pro 5.0), there was a change where now it gives the value "8 EXTRUDES".  Whaaaaat?  This totally FUBARS me on dwgs, and now I simply just have to use non-parametric text.  TOTAL drag.   Is there a fix for this "enhancement" that PTC foisted upon us?   Grazie!

Hi I am new at Prime 5.0 and I wrote a program and for the life of me can not figure out why I cant solve the moment in the spread sheet I created. Can anyone explain what I am doing wrong?

Hello all,   When script logs are used inside functions,they are not displayed in monitoring.. has anyone else observed this..any solution?   Eg. function print(){ logger.info("1"); function print2(){ logger.info("2"); } } print(); logger.info("3");   1 & 3 are printed in script log while 2 is not..     Thanks for any clues..

I want to load students data into a mashup which will be given by user. My vision is , on click of "Add student" button in main page, a window has to pop-up and ask for student name, age, department, photo (image) and so on. After giving all the values, the detail has to be shown in the same main page in addition to the "add student" button. Like this users will add as many students they need.   I'm a newbie here. So step by step instructions will be appreciated.    Thanks and regards, Rajesh

Hey all, Is there any way to retrieve the creo parametric option (configuration) dialog box while updating the config option? Refer attached image. Currently, this dialog box is not available in my creo session. please help to get it back. By Brijith    

Hello. I've got an issue.   The problem boils down to one general issue: I've got an infotable with four boolean properties, and each property is assigned to a shape. Based on the value of the property, the specific shape is visible or not. I have connected the infotable properties (some are true, some false) to the shapes via Selected Rows, but all the shapes are visible, when in reality, some should be hidden.   Can anyone help with this regard? Thanks.

Following code as in https://www.ptc.com/en/support/article?n=CS260605&source=Case%20Viewer To set the state of a Change Notice's Resulting Objects in Windchill   I am on WC Release: 11.1 M020-CPS03 using the following Code in expression Robot:   wt.lifecycle.State state = wt.lifecycle.State.toState("ISSUED");wt.fc.QueryResult resulting = wt.change2.ChangeHelper2.service.getChangeablesAfter((wt.change2.ChangeOrderIfc) primaryBusinessObject);while(resulting.hasMoreElements()){wt.fc.Persistable persistable = (wt.fc.Persistable) resulting.nextElement(); if (persistable instanceof wt.doc.WTDocument && !wt.vc.wip.WorkInProgressHelper.isCheckedOut((wt.vc.wip.Workable) persistable)){wt.lifecycle.LifeCycleHelper.service.setLifeCycleState((LifeCycleManaged)persistable, state);}}   Here is the error in Compile window >> Check Syntax Error: MS Logs 2019-07-24 12:06:44,107 ERROR [ajp-nio-127.0.0.1-8010-exec-6] WF_EXEC_EXPR Administrator -&nbs

I am stuck at configuring charts as there is no drop-down list for my LabelField. Link to the guide: https://developer.thingworx.com/en/resources/guides/display-data-charts/ddc-configure-charts What mine showsWhat is supposed to be shown  

Hi Team,   Is it possible  export an appkey (or list of appkeys ) programmatically? I would like to select all the appkeys by Tag and export them, but I didn't find any information about how to do that. If possible, how can I do it ?   Thanks in advance.  

Hello. I've got an issue.   The problem boils down to one general issue: I've got an infotable with four boolean properties, and each property is assigned to a shape. Based on the value of the property, the specific shape is visible or not. I have connected the infotable properties (some are true, some false) to the shapes, but all the shapes are visible, when in reality, some should be hidden.   I have a thing shape with a service that populates an Infotable property. On my actual thing, when I click the infotable, I can see that one of the infotable values is modified from its default value. But it doesn't display on the mashup.   I have connected the Dynamic Thing Template, and I have connected the GetPropertyValues service, from where I pull the infotable data. But it doesn't connect.   Can anyone help with this regard? Thanks.

I have uploaded additional data to my dataset, but my model is not changed according to newly added data. Please suggest me that Is there any way to get it or I need to create new model and publish to Analytics Manager for every time I add new data into my dataset.

Hello,   I want to disconnect the Websocket connection of a connected remote thing from the Thingworx server. Is it possible? I tried using the DisableThing service, but that only disallowed the client to update the properties, not terminate the WS connection.   If it is not possible, what is the reason for it?

Hi there! I'm writing a service to convert any InfoTable to CSV text. The input is InfoTable without DataShape, it can be any InfoTable, with any filed definition. Now to make this service possible, I need to read data from InfoTable rows dynamically. Normally, I can use row.FieldName to get field value. But in my case, the feild name is a variable, so I want to use some function like row.values[myVariable]. And I cannot find any possible method to read data as I expected. Any advise? Thanks a lot!

Hi all, Like the subject, I would like to create a top-right delete image button for value display widget (like the image below) Is there any way to perform it? Any help is appreciated. Thanks!

I am trying to remove an extension which I have imported but there is no option for me to delete it under the import/export tab. Any suggestions? I am on localhost:8080 and using Thingworx 8.4.0

When I open and edit an Excel file with Vuforia View, the file is not saved to the same location. The temporarily downloaded file is saved locally.

I have a rib profile sketch that I have on layer 1 and on layer 2 at 15" away I took the original sketch reduced it by 10% to get a completed wing.  Now I need to get a sketch of 5 cross-sections to get my patterns made of ribs along the wing.  I tried placing planes at 3" intervals to give me 6 rib patterns then did a section view.  I thought since the section was taken at a plane I could sketch on that plane by projecting the lines created from the section cut but it seems I cannot do this.  Is there another way to get rib patterns made without doing incredible amounts of math going from 10% reduction at 15" what is the reduction at each individual 3" mark moving along the incline?