Solved

from a JSON file that is being fed into my service the date is formatted like this: "\/Date(1490609194000)\/"How would i go about converting this into a format that Thingworx recognises as a DateTime?Thanks

Hi,I have a new problem. I want to solve a ODE-system with variable parameter. In the picture you see a minimal example.I want solve the ODE with variable a so that i get 5 different solutions of the ODE-system. Is there a solution without to use a program? AN if I need a program, how looks it.thanks for helping!

What is the succession of steps to modify a sweep part after the part was finalized and saved? I will attach a simple part as an example, I want to change the 200 mm length of the sweep to 350 mm (for example). I have tried going to Edit Definitions, but no matter what I do, I cannot get all the way back to the dimensions that I need to modify... I want to be able to change the dimensions similarly as one can do that for an extrude feature (for example), where you edit after the initial creation and modify the depth of the extrude, or the length or width associated with it. When it comes to a sweep feature, I cannot make it all the way deep to the initial curve sketching level. I am using Creo 3.0.Thank you, Colin.

Hi Team,We have downloaded dot net SDK assemblies from thingworx market place and forgot the version that we have downloaded but started using thingworx-dotnet-common.dll.So is there anyway to find out to which version this file belongs like SDK 5.0 or 5.6 like that?

When saving an assembly, often times Creo will ask me “Do I want to save/continue/make read only/etc” parts that have really not been intentionally modified. When I indicate “Make Read Only”, I get the message “[filename] could not be saved to the workspace”. Then if I save a second time, the assembly is saved “[filename] has been saved”.Is this something we are doing wrong that makes us have to save twice? Some procedure we need to correct? A setting in the config that needs adjusting? Creo 3.0 F000 Windchill 10.2 M22Thanks in advance,Herb SpauldingMiller Industries

As i had question due to command "windchill wt.util.jmx.SMJconsole" and command "windchill wt.util.jmx.SEJconsole" both returned quiet similar output

I load the table of permissions, make my changes, then click Update at the bottom, and it sits for several minutes, then times out.  Is this the only place to log questions about the portal?

The attached Mathcad Prime 3.1 worksheet (and screenshot) adds a 4th column to the array (or is it a matrix?) with the weight of pipe filled with water per foot. Creating the forth column with a definition works. The if statement tries to accomplish the same goal, what am I doing wrong?

Hi,   Using the appearance manager I made a new appearance, map tab, colour texture set to image and then imported an image to display it on a surface.  I then check this component into windchill however the image gets lost when my colleague opens it on his computer but does not get lost on my computer.   any ideas?   thanks   gord

Hi, i need to create dynamically datastream,i found the snippet code to create a things "runtime". Now i need to create datastreams in a snippet but i can't find documentation on snippet search and on the net. could you please help me ? thanks

Hello,I have solved a DGL with Rkadapt-Routine (Runge-Kutta-Verfahren, adaptiv) , whitch generated following arrays:Now i want to build the acceleration-Matrix by dividing vx over t.So i have to divide each Element and write them into a new Matrix for the acceleration.I think we have to write a little program for it and that's my problem.Can please somebody help me to program it?Thank you for your efforts.best regards, Volker

Hello,I have installed both MathCAD Prime 3.0 and 4.0, today i uninstall MathCAD Prime 3.0, then .mcdx file association lost and can't recovery association.Here is my effort:open "Control Panel"->“file association configuration”, but there is no .mcdx file extension in the list, so fix failed.use mouse right click button on the .mcdx file ,and select "open method" to choose "C:\Program Files\PTC\Mathcad Prime 4.0\MathcadPrime.exe", still no use. The .mcdx file icon is still white and double click .mcdx file can't open it with MathCAD Prime 4.0.How to resolve this problem?

In the attached 3.1 worksheet 4 1x2 matrices are being combined. The values in the first column have units while the second column is unitless. For some reason Mathcad is adding a ft unit to the 0 value. If changed to 1 the units disappear. Why does this happen?

Hello All,I have been working on an integration problem which I was stuck on in which I should have known the identity cos^2(x) = 1/2+cos(2x)/2.I am wondering if there is a way maybe using mathcad's symbolics that I could have worked this out i.e. by Mathcad telling me sin^2(x) is an identity or to get Mathcad to list such identities?Any thoughts?Cheers,Andy

can't even draw a 2D sketch without the program being very very laggy and so slow i can't even use it. I have tried running all the windows updates i can, and i have tried uninstalling and reinstalling the program but no luckhas anyone found this problem or is it a hardware problem?my computer is getting a bit old so maybe its a hardware thing?creo has been running well on here for years so im not sure why it would suddenly be so slow to work. thanks for any help you can give me im also very close to a deadline so speedy help would be appreciated!!!Sam

Hello User Community,So I have another issue similar to yesterday where I am trying to follow the logic to the solution to a problem I have.Again I am sure this is my poor Algebra skills but looking for clarity.Below is the problem is the question and the model answer:The part I am struggling to follow is the displacement mass difference derivation. I follow that:i.e. the product of the initial density and under water volume must equal the second density and underwater volume. Therefore, the first density and underwater volume is equal to the second density multiplied by the initial volume plus the difference in volumes i.e. the second volume.I can also follow that:The difference in displacement mass (between floating in salt water to floating in near fresh water) is equal to the second density multiplied by the difference in volumes which logically is going to give a difference in masses. This being equal to the difference in densities multiplied by the initial volume.I can also follo

How to change the font to ZH-CN font?I can change the words to different Chinese Simplified font in MathCAD 15.0, but i can't find any Chinese Simplified font in MathCAD Prime 3.0/4.0.

Hi!I need some help with programming. I will give an example with the help of candy. The end result is depending on the flavour of the candy and classification (say quality class) of the candy. The user make different choices by clicking in list boxes. The number of alternatives in the boxes is displayed here as ["x" alternatives]"Choice1"The thing is the candy starts of in Class4 if it's not supposed to last longer than 1 week. If it should last longer it's increased with two classes. [2 alternatives]"Choice2"The second thing is the shape of the candy. If it is a flat candy it gets reduced with one class, otherwise there is no reduction.  [2 alternatives]"Choice3"The third thing is the content. If it consists of allergic ingredients it gets reduced with one class. Otherwise there is no reduction. [2 alternatives]"Choice4"The fourth thing is the size (6 sizes): Size = 1,2,3,4,5 and 6 [6 alternatives]"Choice5"The fifth thing is the flavour (7 flavours) Flavour 1,2,3,4,5,6,7 [7 alte

HiA default color of toggle widget is red.like this..I tried to change it, but I couldn't do it.I referenced here. https://codepen.io/Bradley_Lancaster/pen/jPzEbzIf it is possible, please give me an idea.Thanks.

Hello,   I want to get an item's content of a specified date by using HistoricFieldValue.   The general definition of HistoricFieldValue is as follows: HistoricFieldValue(field-name, timestampconstant)   In my js script I'm trying to use it in this manner:   <%compute%>HistoricFieldValue("Content","March 21, 2017")<%endcompute%>   Normally it should work , but I think the problem is the date. What is a timestampconstant? This Error message pops up When i change it to   <%compute%>HistoricFieldValue("Content","Modified Date")<%endcompute%>   (This usage is senseless actually, but I want to describe the problem more precisely )   This error message occurs:   I hope somebody could help me how to use this HistoricFieldValue Function   Best regards Martin

After selecting the Pie chart the parameters to be drawn or shown in the Pie chart , how can we select those parameters? Please do advice me accordingly.

I would like to show the lifecycle state parameter on drawings but the value delivered is not upper case.  Is there a font I can use that would force to upper case regardless?  I did not see an option to force text to be shown as upper case in text style.  I was surprise to not see anything in knowledge base on this. 

Can i make a IF statement for my references? Say if true reference1 is active, and if false, reference2 is active.If not, can i perhaps use VB for programming it?Thanks!

Hello all,I'm implementing alarm handling mechanism which should closely resemble that of alerts (Alert History). However, I stumbled upon a problem associated with a stream. Say I have an array of certain entries which I have to put into a stream. If I loop through that list and run "AddStreamEntry" service with each iteration, in the end I'll see only a single (last) entry. I found an explanation to this in ThingWorx documentation - if a new record has the same timestamp as that of the previous (within 1ms) , the previous entry will be overwritten.The timestamp is a key field for streams. If you add an entry with the same timestamp, it will overwrite the previous timestamp (upsert). To avoid overwriting, specify milliseconds for the timestamp.Does it mean that if two alerts will get acknowledged within 1 ms only 1 record will be made in AlertHistory stream?

Hi All,I have a Site that I am reading xml data from. The problem that I have is using the loadXML script.if I run postman I get the following.<?xml version="1.0" encoding="UTF-8"?><Rates>    <Rate Symbol="EURUSD">        <Bid>1.07607</Bid>        <Ask>1.07632</Ask>        <High>1.07633</High>        <Low>1.07311</Low>        <Direction>0</Direction>        <Last>22:40:33</Last>    </Rate></Rates>I have created a service that I want to use that will pull that information. as shown below.var params = { proxyScheme: undefined /* STRING */, headers: undefined /*'Rates' /* JSON */, url: http://thisisthewebsiteurl /* STRING */, timeout: '60' /* NUMBER */,