Solved

I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.1.8Hi,User not able to promote the object.Getting the error message as:Error while trying to promote PDMLink objects : Master exists more than once: XXXXX.asmThere is no WT Part availabel for the assembly.Could you please help to fix the issues.Thanks in advance.Thanks & Regards,BalakrishnanHere are the errors that I facedError while trying to promote PDMLink objects : Master exists more than once: XXXXX.asm

Hello friends, In Creo Elements Direct Modeling 19.0, how can I measure distance between the axes of two holes?Every time when I want to measure the distance between axes of two holes, I only can get the minimum distance between two holes. 

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.0We need to set up a copy site in a different place, how do we do it？

Hello. I am wondering that if it is possible to manage the assembly references in part mode. For example, i would like to open a part in assembly mode, then i will replace the reference for that part in part mode.

Is there a way to enable and disable the log group with a trigger from a PLC? I need to have the data logger create a new table each time the log group is triggered. 

New to Mathcad, running into an error I can't resolve. I have defined all of my matrices and variables up top, but in the solver block there are unrecognized variables. Error is: "This variable is undefined. Check that the label is set correctly." Anyone have an idea what might be going on? See screenshot below.  Using Mathcad Prime 9.0.0.0

Hello Team, I am installing MacAfee virus application in my server, will it affect or malfunction Kepware software v6.15 functionalities? What steps I need to follow before proceeding to install Antivirus, please suggest.  Regards,Ms. Gopi Vanza

Hello.Im using Mathcad prime 9.0.0.0need to create an analysis in which im comparing my results with my requirements.need some kind of function to do that but not really sure where to start or what to look for. something like my maximum voltage calculated is 16V, but per requirement im allowed to go up to 18Vso want a function that compare this 2 values and show them like:"Result: 16V  -  Margin: 12.5%  -  PASS"   

Hello Trekiel,   I tried the steps mentioned in this post by user "Trekiel" but, I am getting this error message (string reference not set to an instance of a string. parameter name: s). How to resolve on this.?   

Dear Team,I have created a custom parameter into the assembly, Now I want to call this parameter into BOM table. I know how to use repeat region, but I am not able to call the assembly custom parameter into drawing BOM table. Please help. 

Hello I am trying to import Custom CSS in thingowrx mashup design but it has not been applied . I am using @import to do so. Is there anything I am missing here. The same was working with my older thingworx versions? Any help would be appreciatedThanks

Hello In Thingworx 9.4 I am having Datatables mashup and there i am not able to filter. Filter is not working as expected. Does we made any changes recently in this version of thingworx?Any help would be appreciated Thanks

Hello,I want to know about PTC's new PLM application named Windchill + Saas.What is this new application use for which scenarios and how it differs existing Windchill PLM?Is it upgradable from Windchill and is that provides same as Windchill PLM?

please let me know if LWCNormalizedObject api is depricated  to use in eclipse for windchill 12 and if there is any alternative to it.Thanks.

Verify Supported Upgrade Path has found errors.The upgrade path for the source system is not supported for an upgrade to this target system. The following required solutions on the source system are at an invalid release level for this upgrade: IE

I want to solve three equations with three unknowns and display the solution on a 3D graph with two points - the roots of the equation.I can’t find Vyacheslav Mezentsev’s utility (Mathcad 15 or Prime) for such drawing two close surface. Help please.

Hi Guys,      I am following the steps like in the link below, but I am not sure how to work on point 12. 12. Use the Criteria tab to specify any additional criteria that should automatically be applied. For more information, see Query Builder Criteria.The Sort tab does not affect how the search results are sorted. https://support.ptc.com/help/windchill/plus/r12.0.2.0/en/index.html#page/Windchill_Help_Center/LclSrchAdvancedSearchExampleReportTemplate.htmlRegards,Aj

How do you modify the config.pro file on Creo 4.0 M-150.

HI All I have a MVC table in a wizard that displays a list of CAD Components. In the same wizard, I have a combo box which when changed has to change the components. Example, let say the combo box is a filter for parts and assemblies. When I select Parts in the combobox, the table should reload and display only the parts and vice versa. Any ideas how it can be done? I'm unable to build the table based on the value selected in the combobox.

All the variables are defined , However I couldn't figure out why it is not working 

I need to import .prt file in solid works with minimum data loss and in editable format. Also with feature recognition as accurate as posiible.  I tried importing one .prt file in solid works but data and feature recognition is not properly extracted. Please help me with this

How to get automatically Approver by, Approver Date and same for Reviewer into Parameter. Once promotion approver and reviewer is complete. Regards,Aj

I am using Creo Parametric Release 8.0 and Datecode8.0.8.0Is there any possibilty to copy as external representation in toolkit? (similar to Copy As External command in Creo)

Hi everyone, I'm experiencing an issue with Creo 9.0.1.0 Parametric Educational Edition, as the program does not let me export drawings in PDF format if they contain certain symbols.For example, the following drawing is exported correctly:While if I change the radius dimension to a diameter one, containing the symbol  Φ instead of the letter R, as in the following:I get this error:And the export is not carried out.Has anyone experienced the same issue and know how to solve it?Thank you very much,Andrea.    

I've removed the plugin extension, why does the plugin still exist?